[PATCH 098/149] USB: serial: pl2303: clean up urb->status usage

This done in anticipation of removal of urb->status, which will make
that patch easier to review and apply in the future.


Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/serial/pl2303.c |   42 ++++++++++++++++++++++--------------------
 1 files changed, 22 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3022d65..4348c1f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -961,11 +961,12 @@ static void pl2303_read_int_callback(struct urb *urb)
 	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned int actual_length = urb->actual_length;
-	int status;
+	int status = urb->status;
+	int retval;
 
 	dbg("%s (%d)", __FUNCTION__, port->number);
 
-	switch (urb->status) {
+	switch (status) {
 	case 0:
 		/* success */
 		break;
@@ -974,11 +975,11 @@ static void pl2303_read_int_callback(struct urb *urb)
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d", __FUNCTION__,
-		    urb->status);
+		    status);
 		return;
 	default:
 		dbg("%s - nonzero urb status received: %d", __FUNCTION__,
-		    urb->status);
+		    status);
 		goto exit;
 	}
 
@@ -988,11 +989,11 @@ static void pl2303_read_int_callback(struct urb *urb)
 	pl2303_update_line_status(port, data, actual_length);
 
 exit:
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status)
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
 		dev_err(&urb->dev->dev,
 			"%s - usb_submit_urb failed with result %d\n",
-			__FUNCTION__, status);
+			__FUNCTION__, retval);
 }
 
 static void pl2303_read_bulk_callback(struct urb *urb)
@@ -1004,23 +1005,23 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	unsigned long flags;
 	int i;
 	int result;
-	u8 status;
+	int status = urb->status;
+	u8 line_status;
 	char tty_flag;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	if (urb->status) {
-		dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+	if (status) {
+		dbg("%s - urb status = %d", __FUNCTION__, status);
 		if (!port->open_count) {
 			dbg("%s - port is closed, exiting.", __FUNCTION__);
 			return;
 		}
-		if (urb->status == -EPROTO) {
+		if (status == -EPROTO) {
 			/* PL2303 mysteriously fails with -EPROTO reschedule
 			 * the read */
 			dbg("%s - caught -EPROTO, resubmitting the urb",
 			    __FUNCTION__);
-			urb->status = 0;
 			urb->dev = port->serial->dev;
 			result = usb_submit_urb(urb, GFP_ATOMIC);
 			if (result)
@@ -1040,18 +1041,18 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	tty_flag = TTY_NORMAL;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	status = priv->line_status;
+	line_status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
 	wake_up_interruptible(&priv->delta_msr_wait);
 
 	/* break takes precedence over parity, */
 	/* which takes precedence over framing errors */
-	if (status & UART_BREAK_ERROR )
+	if (line_status & UART_BREAK_ERROR )
 		tty_flag = TTY_BREAK;
-	else if (status & UART_PARITY_ERROR)
+	else if (line_status & UART_PARITY_ERROR)
 		tty_flag = TTY_PARITY;
-	else if (status & UART_FRAME_ERROR)
+	else if (line_status & UART_FRAME_ERROR)
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag);
 
@@ -1059,7 +1060,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
-		if (status & UART_OVERRUN_ERROR)
+		if (line_status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 		for (i = 0; i < urb->actual_length; ++i)
 			tty_insert_flip_char(tty, data[i], tty_flag);
@@ -1083,10 +1084,11 @@ static void pl2303_write_bulk_callback(struct urb *urb)
 	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int result;
+	int status = urb->status;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	switch (urb->status) {
+	switch (status) {
 	case 0:
 		/* success */
 		break;
@@ -1095,14 +1097,14 @@ static void pl2303_write_bulk_callback(struct urb *urb)
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d", __FUNCTION__,
-		    urb->status);
+		    status);
 		priv->write_urb_in_use = 0;
 		return;
 	default:
 		/* error in the urb, so we have to resubmit it */
 		dbg("%s - Overflow in write", __FUNCTION__);
 		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
-		    urb->status);
+		    status);
 		port->write_urb->transfer_buffer_length = 1;
 		port->write_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-- 
1.5.2.2


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel