patch usb-move-routines-in-hcd.c.patch added to gregkh-2.6 tree

This is a note to let you know that I've just added the patch titled

     Subject: USB: move routines in hcd.c

to my gregkh-2.6 tree.  Its filename is

     usb-move-routines-in-hcd.c.patch

This tree can be found at 
    http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/


>From [email protected]  Wed Jul 18 12:25:50 2007
From: Alan Stern <[email protected]>
Date: Wed, 18 Jul 2007 12:08:02 -0400 (EDT)
Subject: USB: move routines in hcd.c
To: Greg KH <[email protected]>
Cc: USB development list <[email protected]>
Message-ID: <[email protected]>


This patch (as939) moves a couple of routine in hcd.c around.  The
purpose is to put all the general URB- and endpoint-related routines
(submit, unlink, giveback, and disable) together in one spot.

There are no functional changes.

Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
 drivers/usb/core/hcd.c |   82 ++++++++++++++++++++++++-------------------------
 1 file changed, 41 insertions(+), 41 deletions(-)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1033,18 +1033,6 @@ done:
 
 /*-------------------------------------------------------------------------*/
 
-/* called in any context */
-int usb_hcd_get_frame_number (struct usb_device *udev)
-{
-	struct usb_hcd	*hcd = bus_to_hcd(udev->bus);
-
-	if (!HC_IS_RUNNING (hcd->state))
-		return -ESHUTDOWN;
-	return hcd->driver->get_frame_number (hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
 /* this makes the hcd giveback() the urb more quickly, by kicking it
  * off hardware queues (which may take a while) and returning it as
  * soon as practical.  we've already set up the urb's return status,
@@ -1167,6 +1155,35 @@ done:
 
 /*-------------------------------------------------------------------------*/
 
+/**
+ * usb_hcd_giveback_urb - return URB from HCD to device driver
+ * @hcd: host controller returning the URB
+ * @urb: urb being returned to the USB device driver.
+ * Context: in_interrupt()
+ *
+ * This hands the URB from HCD to its USB device driver, using its
+ * completion function.  The HCD has freed all per-urb resources
+ * (and is done using urb->hcpriv).  It also released all HCD locks;
+ * the device driver won't cause problems if it frees, modifies,
+ * or resubmits this URB.
+ */
+void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
+{
+	urb_unlink(hcd, urb);
+	usbmon_urb_complete (&hcd->self, urb);
+	usb_unanchor_urb(urb);
+
+	/* pass ownership to the completion handler */
+	urb->complete (urb);
+	atomic_dec (&urb->use_count);
+	if (unlikely (urb->reject))
+		wake_up (&usb_kill_urb_queue);
+	usb_put_urb (urb);
+}
+EXPORT_SYMBOL (usb_hcd_giveback_urb);
+
+/*-------------------------------------------------------------------------*/
+
 /* disables the endpoint: cancels any pending urbs, then synchronizes with
  * the hcd to make sure all endpoint state is gone from hardware, and then
  * waits until the endpoint's queue is completely drained. use for
@@ -1260,6 +1277,18 @@ rescan:
 
 /*-------------------------------------------------------------------------*/
 
+/* called in any context */
+int usb_hcd_get_frame_number (struct usb_device *udev)
+{
+	struct usb_hcd	*hcd = bus_to_hcd(udev->bus);
+
+	if (!HC_IS_RUNNING (hcd->state))
+		return -ESHUTDOWN;
+	return hcd->driver->get_frame_number (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
 #ifdef	CONFIG_PM
 
 int hcd_bus_suspend(struct usb_device *rhdev)
@@ -1395,35 +1424,6 @@ EXPORT_SYMBOL (usb_bus_start_enum);
 /*-------------------------------------------------------------------------*/
 
 /**
- * usb_hcd_giveback_urb - return URB from HCD to device driver
- * @hcd: host controller returning the URB
- * @urb: urb being returned to the USB device driver.
- * Context: in_interrupt()
- *
- * This hands the URB from HCD to its USB device driver, using its
- * completion function.  The HCD has freed all per-urb resources
- * (and is done using urb->hcpriv).  It also released all HCD locks;
- * the device driver won't cause problems if it frees, modifies,
- * or resubmits this URB.
- */
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
-{
-	urb_unlink(hcd, urb);
-	usbmon_urb_complete (&hcd->self, urb);
-	usb_unanchor_urb(urb);
-
-	/* pass ownership to the completion handler */
-	urb->complete (urb);
-	atomic_dec (&urb->use_count);
-	if (unlikely (urb->reject))
-		wake_up (&usb_kill_urb_queue);
-	usb_put_urb (urb);
-}
-EXPORT_SYMBOL (usb_hcd_giveback_urb);
-
-/*-------------------------------------------------------------------------*/
-
-/**
  * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
  * @irq: the IRQ being raised
  * @__hcd: pointer to the HCD whose IRQ is being signaled


Patches currently in gregkh-2.6 which might be from [email protected] are

driver/pm-remove-deprecated-sysfs-files.patch
driver/pm-remove-deprecated-dpm_runtime_-routines.patch
usb/usb-add-descriptors-binary-sysfs-attribute.patch
usb/usb-documentation-update-for-usb_unlink_urb.patch
usb/usb-fix-warning-caused-by-autosuspend-counter-going-negative.patch
usb/uhci-short-control-urbs-get-a-status-stage.patch
usb/isp116x-hcd-prepare-for-urb-status.patch
usb/usb-usb-storage-unusual_devs-entry-for-nikon-d100.patch
usb/usb-change-name-of-spinlock-in-hcd.c.patch
usb/usb-move-routines-in-hcd.c.patch

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel