[PATCH] USB: accept 1-byte Device Status replies

Some devices have a bug which causes them to send a 1-byte reply to
Get-Device-Status requests instead of 2 bytes as required by the
spec.  This doesn't play well with autosuspend, since we look for a
valid status reply to make sure the device is still present when it
resumes.  Without both bytes, we assume the device has been
disconnected.

Lack of the second byte shouldn't matter much, since the spec requires
it always to be equal to 0.  Hence this patch (as959) causes
finish_port_resume() to accept a 1-byte reply as valid.

Signed-off-by: Alan Stern <[email protected]>

---

Index: usb-2.6/drivers/usb/core/hub.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/hub.c
+++ usb-2.6/drivers/usb/core/hub.c
@@ -1764,9 +1764,10 @@ static int finish_port_resume(struct usb
 	 * and device drivers will know about any resume quirks.
 	 */
 	if (status == 0) {
+		devstatus = 0;
 		status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
 		if (status >= 0)
-			status = (status == 2 ? 0 : -ENODEV);
+			status = (status > 0 ? 0 : -ENODEV);
 	}
 
 	if (status) {


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel