Re: FT2232 USB to serial on 64b
"Jon Smirl" <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
On 8/16/07, Pete Zaitcev <[email protected]> wrote: > On Wed, 15 Aug 2007 20:54:59 -0400, "Jon Smirl" <[email protected]> wrote: > > > Any obvious ideas on why I can't transmit with the ftdi_sio driver on > > 64b Intel? I can receive without problem. Same device/driver works > > fine on 32b. > > I can only think of an improper sizeof. This assumes that you tried to > boot a 32-bit kernel on the SAME UNIT. Otherwise, minute differences > in motherboard/BIOS/RAM/whatever make account for the result. You are right, I was running 32b on a similar but not exactly the same machine. This exact machine fails the same way for 32b. Machine is Dell 9200, quad core, 4GB RAM, ICH8R. Device is Olimex FT2332. I tried all the USB ports, so it is not a bad port. Kernel is current linus tree. It is new machine, I've only tried a few other USB devices but they all work. I've ordered another USBtoSerial device with a different chip as a work around. Bus 007 Device 002: ID 15ba:0003 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x15ba idProduct 0x0003 bcdDevice 5.00 iManufacturer 1 Olimex iProduct 2 Olimex OpenOCD JTAG iSerial 3 FTPVS5PF bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 300mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 2 Olimex OpenOCD JTAG Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 2 Olimex OpenOCD JTAG Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) -- Jon Smirl [email protected] ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel