Re: Wrong usb.id for 'Belkin bluetooth usb adapter cl. 1'

On Sat, Sep 22, 2007 at 07:08:13PM +0200, ?lvaro Hern?ndez Tortosa wrote:
> 
> 	Hi all. I hope to be posting to the right place.
> 
> 	I have a usb bluetooh adapter, from Belkin, but with the current
> usb.ids list it is recognized as a Ethernet adapter.
> 
> 	Vendor information, as shown on the device, is as follows:
> 
> BELKIN
> Bluetooth USB Adapter
> Model: F8T012xx1
> 
> 	USB id is "050d:0121" which in the current list refers to as
> "Belkin Components F5D5050 100Mbps Ethernet" which is not correct. With
> this information, the device does not work as this id is associated to
> work with the AMDTek pegasus driver (a USB-Ethernet driver), which by
> the way gets hang while trying to load with this device plugged in,
> until it is plugged off.
> 
> 	An excerpt from /proc/bus/usb/devices is:
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
> D:  Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=050d ProdID=0121 Rev= 1.00
> S:  Manufacturer=Broadcom Corp
> S:  Product=BELKIN BLUETOOTH USB ADAPTER CL. 1
> C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
> E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
> I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
> 
> which clearly states the device as a bluetooth (class 1) adapter.
> 
> 	Not loading the pegasus driver and using instead the hci_usb,
> the device works like a charm.
> 
> 	This device is shown on Belkin's website at URL:
> http://catalog.belkin.com/IWCatProductPage.process?Product_Id=273100
> 
> while the device it is reported to be with the current usb.list is:
> http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=1&Product_Id=104991
> 
> 	I would like the usb.ids list to be corrected. Please let me
> know how to help on doing so.

Try sending this to the bluez developers, they are the ones that can fix
this in their driver.

thanks,

greg k-h

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel