Re: Trouble with usb modem
Davide Pagnin <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi Oliver This systems with SLES 9, are new server from IBM attached via hardware iSCSI hba from QLOGIC to IBM System i, and only linux SLES 9 SP3 x86-64 is supported as linux platform. This is why I'm stick to this linux release. I'm attaching a complete dmesg, this came from a different server (IBM system X 236) that exibits the same issue (first sample was from an IBM system X 3500) but has a PS/2 keyboard. Bye the way, this is what I get in the relevant dmesg if I connect the modem with the system already booted. usb 2-1: new full speed USB device using address 4 usb 2-1: Product: MultiModemUSB usb 2-1: Manufacturer: Multi-Tech Systems, Inc. usb 2-1: configuration #2 chosen from 2 choices cdc_acm 2-1:2.0: ttyACM0: USB ACM device<6>usbcore: registered new driver cdc_acm drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters Provided that the driver for the IBM/QLOGIC hba works, I can try a more recent kernel, do you suggest me to try the last vanilla kernel or a kernel from SUSE SLES 10? Thank you in advance Davide Pagnin Oliver Neukum ha scritto: > Am Freitag 05 Oktober 2007 schrieb Davide Pagnin: >> Hi all >> >> I'm trying to use an usb modem from multitech with linux SUSE SLES 9 >> SP3, with latest kernel update 2.6.5-7.286. > > Very old. Do you know if modern kernels show the same error? > >> If the modem is connected during the boot process, the khubd process die >> and I get this dump (cut/paste from dmesg) and all usb devices does not >> respond (also the keyboard!) > > If khubd dies before enumerating devices, no such device will work. > >> Instead, If I make the boot with the modem disconnected and after the >> boot process is completed, I connect the momem, no problem arise. >> >> I'm in the process of opening a support request to novell, but this is >> always a long process and if any of you have a clue or can suggest a way >> to gather more useful information, let me know! >> >> Thank you in advance >> >> Davide Pagnin >> >> usb 2-2: USB disconnect, address -1 > > This looks very odd. Can you provide more dmesg? > > Regards > Oliver ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
dmesg.txt
(text/plain, 27.3 KB)
Bootdata ok (command line is root=/dev/sda2 vga=0x31a selinux=0 splash=silent resume=/dev/sda1 elevator=cfq showopts)
Linux version 2.6.5-7.286-smp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Thu May 31 10:12:58 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffcae00 (usable)
BIOS-e820: 000000007ffcae00 - 000000007ffcf800 (ACPI data)
BIOS-e820: 000000007ffcf800 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
No NUMA configuration found
Faking a node at 0000000000000000-000000007ffca000
Bootmem setup node 0 0000000000000000-000000007ffca000
No mptable found.
On node 0 totalpages: 524234
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 520138 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v002 IBM ) @ 0x00000000000fdfb0
ACPI: XSDT (v001 IBM SERONYXP 0x00001001 IBM 0x45444f43) @ 0x000000007ffcf700
ACPI: FADT (v002 IBM SERONYXP 0x00001001 IBM 0x45444f43) @ 0x000000007ffcf640
ACPI: MADT (v001 IBM SERONYXP 0x00001001 IBM 0x45444f43) @ 0x000000007ffcf580
ACPI: MCFG (v001 IBM SERONYXP 0x00001001 IBM 0x45444f43) @ 0x000000007ffcf540
ACPI: DSDT (v002 IBM SERGEODE 0x00001000 INTL 0x20041203) @ 0x0000000000000000
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 13, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0c] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 12, version 32, address 0xfec80400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
Built 1 zonelists
Kernel command line: root=/dev/sda2 vga=0x31a selinux=0 splash=silent resume=/dev/sda1 elevator=cfq showopts
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 16 (order 4: 256 bytes)
CKRM Initialization
...... Initializing ClassType<taskclass> ........
...... Initializing ClassType<socketclass> ........
CKRM Initialization done
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 3000.264 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 2049640k/2096936k available (2467k kernel code, 0k reserved, 1598k data, 204k init)
Calibrating delay loop... 5914.62 BogoMIPS
Calibrating delay loop... 5914.62 BogoMIPS
Calibrating delay loop... 5914.62 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
per-CPU timeslice cutoff: 615.86 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/1 rip 6000 rsp 10037da3f58
Initializing CPU#1
Calibrating delay loop... 5996.54 BogoMIPS
Calibrating delay loop... 5996.54 BogoMIPS
Calibrating delay loop... 5980.16 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Total of 2 processors activated (11911.16 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 14-0, 14-16, 14-17, 14-18, 14-19, 14-20, 14-21, 14-22, 14-23, 13-0, 13-1, 13-2, 13-3, 13-4, 13-5, 13-6, 13-7, 13-8, 13-9, 13-10, 13-11, 13-12, 13-13, 13-14, 13-15, 13-16, 13-17, 13-18, 13-19, 13-20, 13-21, 13-22, 13-23, 12-0, 12-1, 12-2, 12-3, 12-4, 12-5, 12-6, 12-7, 12-8, 12-9, 12-10, 12-11, 12-12, 12-13, 12-14, 12-15, 12-16, 12-17, 12-18, 12-19, 12-20, 12-21, 12-22, 12-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 12.501 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
khelper: max 64 concurrent processes
resid is -1 name is io <NULL>
CKRM .. create res clsobj for resouce <io>class <taskclass> par=0000000000000000
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
ACPI: PCI Interrupt Link [LP00] (IRQs *5)
ACPI: PCI Interrupt Link [LP01] (IRQs *11)
ACPI: PCI Interrupt Link [LP02] (IRQs *10)
ACPI: PCI Interrupt Link [LP03] (IRQs *11)
ACPI: PCI Interrupt Link [LP04] (IRQs *11)
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP07] (IRQs *5)
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
GSI 16 assigned vector 0xA9 and IRQ 16
IOAPIC[0]: Set PCI routing entry (14-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
GSI 19 assigned vector 0xB1 and IRQ 17
IOAPIC[0]: Set PCI routing entry (14-19 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
GSI 23 assigned vector 0xB9 and IRQ 18
IOAPIC[0]: Set PCI routing entry (14-23 -> 0xb9 -> IRQ 18 Mode:1 Active:1)
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
GSI 17 sharing vector 0xB1 and IRQ 17
IOAPIC[0]: Set PCI routing entry (14-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:02:00.2[B] -> GSI 17 (level, low) -> IRQ 17
GSI 30 assigned vector 0xC1 and IRQ 19
IOAPIC[1]: Set PCI routing entry (13-6 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 30 (level, low) -> IRQ 19
GSI 31 assigned vector 0xC9 and IRQ 20
IOAPIC[1]: Set PCI routing entry (13-7 -> 0xc9 -> IRQ 20 Mode:1 Active:1)
ACPI: PCI interrupt 0000:03:07.1[B] -> GSI 31 (level, low) -> IRQ 20
GSI 52 assigned vector 0xD1 and IRQ 21
IOAPIC[2]: Set PCI routing entry (12-4 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
ACPI: PCI interrupt 0000:04:01.0[A] -> GSI 52 (level, low) -> IRQ 21
GSI 53 assigned vector 0xD9 and IRQ 22
IOAPIC[2]: Set PCI routing entry (12-5 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
ACPI: PCI interrupt 0000:04:01.1[B] -> GSI 53 (level, low) -> IRQ 22
ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
GSI 20 sharing vector 0xC9 and IRQ 20
IOAPIC[0]: Set PCI routing entry (14-20 -> 0xc9 -> IRQ 20 Mode:1 Active:1)
ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 20
number of MP IRQ sources: 15.
number of IO-APIC #14 registers: 24.
number of IO-APIC #13 registers: 24.
number of IO-APIC #12 registers: 24.
testing the IO APIC.......................
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 B1
12 000 00 1 0 0 0 0 0 0 00
13 003 03 1 1 0 1 0 1 1 B1
14 003 03 1 1 0 1 0 1 1 C9
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 003 03 1 1 0 1 0 1 1 B9
IO APIC #13......
.... register #00: 0D000000
....... : physical APIC id: 0D
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 0D000000
....... : arbitration: 0D
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 003 03 1 1 0 1 0 1 1 C1
07 003 03 1 1 0 1 0 1 1 C9
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #12......
.... register #00: 0C000000
....... : physical APIC id: 0C
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 0C000000
....... : arbitration: 0C
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 003 03 1 1 0 1 0 1 1 D1
05 003 03 1 1 0 1 0 1 1 D9
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:19-> 0:17
IRQ18 -> 0:23
IRQ19 -> 1:6
IRQ20 -> 1:7-> 0:20
IRQ21 -> 2:4
IRQ22 -> 2:5
.................................... done.
PCI: Cannot allocate resource region 1 of device 0000:00:00.0
PCI-DMA: Disabling IOMMU.
vesafb: framebuffer at 0xd0000000, mapped to 0xffffff0000008000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Initial HugeTLB pages allocated: 0
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found.
Console: switching to colour frame buffer device 160x64
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0480-0x0487, BIOS settings: hda:DMA, hdb:DMA
hda: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
ACPI: (supports S0 S4 S5)
resid is -1 name is cpu <NULL>
CKRM .. create res clsobj for resouce <cpu>class <taskclass> par=0000000000000000
........init_ckrm_sched_res , resid= 5
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 30 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:03:07.1[B] -> GSI 31 (level, low) -> IRQ 20
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
Vendor: IBM Model: 02R0980a S320 1 Rev: 1
Type: Processor ANSI SCSI revision: 02
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, dmapi support, no debug enabled
QLogic iSCSI HBA Driver (ffffffffa0177000)
ACPI: PCI interrupt 0000:04:01.1[B] -> GSI 53 (level, low) -> IRQ 22
qla4xxx 0000:04:01.1: Found an ISP4022, irq 22, iobase 0xffffff000101a000
qla4xxx 0000:04:01.1: Configuring PCI space...
qla4xxx 0000:04:01.1: Configuring NVRAM ...
qla4xxx 0000:04:01.1: Initializing firmware..
qla4xxx 0000:04:01.1: Waiting for Firmware Ready..
qla4xxx 0000:04:01.1: Firmware Ready..
qla4xxx 0000:04:01.1: Initializing DDBs ...
qla4xxx 0000:04:01.1: DDB[0] MB0 4000 Tot 1 Next 0 State 0004 ConnErr 00000000 192.168.250.11:3260 "iqn.1924-02.com.ibm:65614dc1.srv2lnx.t1"
qla4xxx 0000:04:01.1: DDB[0] MB0 4000 Tot 1 Next 0 State 0004 ConnErr 00000000 192.168.250.11:3260 "iqn.1924-02.com.ibm:65614dc1.srv2lnx.t1"
qla4xxx 0000:04:01.1: DDB list done..
scsi-qla0-mac=000d60b96d81\;
scsi2 : qla4xxx
QLogic iSCSI HBA Driver version: 5.00.04
QLogic ISP4022 @ 0000:04:01.1 hdma+, host#=2, fw=02.00.00.29
Vendor: IBM Model: VDASD SRV2LNX1 Rev: 0001
Type: Direct-Access ANSI SCSI revision: 04
qla4xxx 0000:04:01.1: scsi(2:0:0:0): Enabled tagged queuing, queue depth 32.
SCSI device sda: 12289725 512-byte hdwr sectors (6292 MB)
SCSI device sda: drive cache: none
sda: sda1 sda2
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Vendor: IBM Model: VOPT OPT01 Rev: 0001
Type: CD-ROM ANSI SCSI revision: 04
qla4xxx 0000:04:01.1: scsi(2:0:0:64): Enabled tagged queuing, queue depth 32.
Vendor: TANDBERG Model: SLR60 Rev: 0750
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: IBM Model: VDASD SRV2LNX2 Rev: 0001
Type: Direct-Access ANSI SCSI revision: 04
qla4xxx 0000:04:01.1: scsi(2:0:0:1): Enabled tagged queuing, queue depth 32.
SCSI device sdb: 2048000 512-byte hdwr sectors (1049 MB)
SCSI device sdb: drive cache: none
sdb: sdb1
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 1
Vendor: IBM Model: ULT3580-TD2 Rev: 4B80
Type: Sequential-Access ANSI SCSI revision: 03
qla4xxx 0000:04:01.1: scsi(2:0:0:129): Enabled tagged queuing, queue depth 32.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0000000000002200
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.5-7.286-smp uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 17, io base 0000000000002600
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.5-7.286-smp uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
qla4xxx: invalid ioctl magic number received.
XFS mounting filesystem sda2
Starting XFS recovery on filesystem: sda2 (dev: sda2)
usb 1-2: new full speed USB device using address 2
usb 1-2: device descriptor read/8, error 0
usb 2-2: new full speed USB device using address 2
usb 2-2: Product: PPC I/F
usb 2-2: Manufacturer: IBM
usb 2-2: SerialNumber: 00112590b9e0
Ending XFS recovery on filesystem: sda2 (dev: sda2)
VFS: Mounted root (xfs filesystem) readonly.
Trying to move old root to /initrd ... /initrd does not exist. Ignored.
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 204k freed
Adding 1052408k swap on /dev/sda1. Priority:42 extents:1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: Allocated new minor_bits array for 1024 devices
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
subfs 0.9
qla4xxx: invalid ioctl magic number received.
qla4xxx: invalid ioctl magic number received.
qla4xxx: invalid ioctl magic number received.
Attached scsi generic sg0 at scsi1, channel 0, id 8, lun 0, type 3
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 64, type 5
Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 128, type 1
Attached scsi generic sg4 at scsi2, channel 0, id 0, lun 1, type 0
Attached scsi generic sg5 at scsi2, channel 0, id 0, lun 129, type 1
scsi2 (0,0,64) : reservation conflict
sr0: scsi-1 drive
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 64
st: Version 20040318, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi2, channel 0, id 0, lun 128
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 4503599627370495
Attached scsi tape st1 at scsi2, channel 0, id 0, lun 129
st1: try direct i/o: yes (alignment 512 B), max page reachable by HBA 4503599627370495
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
sr0: Hmm, seems the drive doesn't support multisession CD's
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
scsi2 (0,0,64) : reservation conflict
hw_random hardware driver 1.0.0 loaded
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 18, pci mem ffffff00010b8000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.5-7.286-smp ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 2-2: USB disconnect, address 2
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-2: USB disconnect, address -1
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff80234a10>{strlen+0}
PML4 7953a067 PGD 79b78067 PMD 0
Oops: 0000 [1] SMP
CPU 0
Pid: 2248, comm: khubd Not tainted (2.6.5-7.286-smp SLES9_SP3_BRANCH-20070531101258)
RIP: 0010:[<ffffffff80234a10>] <ffffffff80234a10>{strlen+0}
RSP: 0000:000001007eb15d80 EFLAGS: 00010216
RAX: 000001007e4df080 RBX: 0000000000000000 RCX: ffffffffa01db6a8
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 000001007e7c7080 R08: 0000000000000001 R09: 0062737500000001
R10: 0000000000000246 R11: 0000000000000000 R12: 0000010003637c00
R13: 000001007e4ad400 R14: ffffffff804431c0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffffffff805dc500(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0
Process khubd (pid: 2248, threadinfo 000001007eb14000, task 000001007e5f6aa0)
Stack: ffffffff801d14d8 0000000000000000 000001007e4ad400 ffffffff804431c0
000001007e7c7080 ffffffffa01db7e0 ffffffff801d157a 000001007e4ae830
000001007e4ae8f0 ffffffffa01db7e0
Call Trace:<ffffffff801d14d8>{sysfs_get_dentry+24} <ffffffff801d157a>{sysfs_hash_and_remove+58}
<ffffffff802822da>{device_release_driver+42} <ffffffff8028240b>{bus_remove_device+59}
<ffffffff80281258>{device_del+88} <ffffffff80281299>{device_unregister+9}
<ffffffffa01c0461>{:usbcore:hub_port_connect_change+97}
<ffffffffa01c0ae2>{:usbcore:hub_thread+706} <ffffffff8013d610>{autoremove_wake_function+0}
<ffffffff8013d610>{autoremove_wake_function+0} <ffffffff8011122f>{child_rip+8}
<ffffffffa01c0820>{:usbcore:hub_thread+0} <ffffffff80111227>{child_rip+0}
Code: 80 3f 00 48 89 f8 74 08 48 ff c0 80 38 00 75 f8 48 29 f8 c3
RIP <ffffffff80234a10>{strlen+0} RSP <000001007eb15d80>
CR2: 0000000000000000
<6>tg3.c:v3.37 (August 25, 2005)
ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:25:e9:a3:76
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:07:00.0 to 64
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:25:e9:a3:77
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000]
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
Installing knfsd (copyright (C) 1996 [email protected]).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU0] (supports C1)
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
smbfs: module not supported by Novell, setting U taint flag.
eth0: no IPv6 routers present