[PATCH 012/142] USB: avoid using urb->pipe in usbcore

From: Alan Stern <[email protected]>

This patch (as946) eliminates many of the uses of urb->pipe in
usbcore.  Unfortunately there will have to be a significant API
change, affecting all USB drivers, before we can remove it entirely.
This patch contents itself with changing only the interface to
usb_buffer_map_sg() and friends: The pipe argument is replaced with a
direction flag.  That can be done easily because those routines get
used in only one place.

Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/core/hcd.c     |   40 ++++++++++++++++++++++++----------------
 drivers/usb/core/message.c |   14 ++++++++------
 drivers/usb/core/usb.c     |   19 +++++++++----------
 include/linux/usb.h        |    6 +++---
 4 files changed, 44 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index bcbaedc..739c5e0 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -635,9 +635,9 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
 
 static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
 {
-	if (usb_pipeint (urb->pipe))
+	if (usb_endpoint_xfer_int(&urb->ep->desc))
 		return rh_queue_status (hcd, urb);
-	if (usb_pipecontrol (urb->pipe))
+	if (usb_endpoint_xfer_control(&urb->ep->desc))
 		return rh_call_control (hcd, urb);
 	return -EINVAL;
 }
@@ -651,7 +651,7 @@ static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 {
 	unsigned long	flags;
 
-	if (usb_pipeendpoint(urb->pipe) == 0) {	/* Control URB */
+	if (usb_endpoint_num(&urb->ep->desc) == 0) {	/* Control URB */
 		;	/* Do nothing */
 
 	} else {				/* Status URB */
@@ -918,7 +918,7 @@ static void urb_unlink(struct usb_hcd *hcd, struct urb *urb)
 	spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
 
 	if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
-		if (usb_pipecontrol (urb->pipe)
+		if (usb_endpoint_xfer_control(&urb->ep->desc)
 			&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
 			dma_unmap_single (hcd->self.controller, urb->setup_dma,
 					sizeof (struct usb_ctrlrequest),
@@ -1001,7 +1001,7 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
 	 * unless it uses pio or talks to another transport.
 	 */
 	if (hcd->self.uses_dma) {
-		if (usb_pipecontrol (urb->pipe)
+		if (usb_endpoint_xfer_control(&urb->ep->desc)
 			&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
 			urb->setup_dma = dma_map_single (
 					hcd->self.controller,
@@ -1201,11 +1201,13 @@ rescan:
 	spin_lock(&hcd_urb_list_lock);
 	list_for_each_entry (urb, &ep->urb_list, urb_list) {
 		int	tmp;
+		int	is_in;
 
 		/* the urb may already have been unlinked */
 		if (urb->status != -EINPROGRESS)
 			continue;
 		usb_get_urb (urb);
+		is_in = usb_urb_dir_in(urb);
 		spin_unlock(&hcd_urb_list_lock);
 
 		spin_lock (&urb->lock);
@@ -1216,19 +1218,25 @@ rescan:
 
 		/* kick hcd unless it's already returning this */
 		if (tmp == -EINPROGRESS) {
-			tmp = urb->pipe;
 			unlink1 (hcd, urb);
 			dev_dbg (hcd->self.controller,
-				"shutdown urb %p pipe %08x ep%d%s%s\n",
-				urb, tmp, usb_pipeendpoint (tmp),
-				(tmp & USB_DIR_IN) ? "in" : "out",
-				({ char *s; \
-				 switch (usb_pipetype (tmp)) { \
-				 case PIPE_CONTROL:	s = ""; break; \
-				 case PIPE_BULK:	s = "-bulk"; break; \
-				 case PIPE_INTERRUPT:	s = "-intr"; break; \
-				 default: 		s = "-iso"; break; \
-				}; s;}));
+				"shutdown urb %p ep%d%s%s\n",
+				urb, usb_endpoint_num(&ep->desc),
+				is_in ? "in" : "out",
+				({	char *s;
+
+					switch (usb_endpoint_type(&ep->desc)) {
+					case USB_ENDPOINT_XFER_CONTROL:
+						s = ""; break;
+					case USB_ENDPOINT_XFER_BULK:
+						s = "-bulk"; break;
+					case USB_ENDPOINT_XFER_INT:
+						s = "-intr"; break;
+					default:
+				 		s = "-iso"; break;
+					};
+					s;
+				}));
 		}
 		usb_put_urb (urb);
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 0d61864..a26a729 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -59,8 +59,8 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
 		dev_dbg(&urb->dev->dev,
 			"%s timed out on ep%d%s len=%d/%d\n",
 			current->comm,
-			usb_pipeendpoint(urb->pipe),
-			usb_pipein(urb->pipe) ? "in" : "out",
+			usb_endpoint_num(&urb->ep->desc),
+			usb_urb_dir_in(urb) ? "in" : "out",
 			urb->actual_length,
 			urb->transfer_buffer_length);
 	} else
@@ -250,7 +250,8 @@ static void sg_clean (struct usb_sg_request *io)
 		io->urbs = NULL;
 	}
 	if (io->dev->dev.dma_mask != NULL)
-		usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents);
+		usb_buffer_unmap_sg (io->dev, usb_pipein(io->pipe),
+				io->sg, io->nents);
 	io->dev = NULL;
 }
 
@@ -278,8 +279,8 @@ static void sg_complete (struct urb *urb)
 		dev_err (io->dev->bus->controller,
 			"dev %s ep%d%s scatterlist error %d/%d\n",
 			io->dev->devpath,
-			usb_pipeendpoint (urb->pipe),
-			usb_pipein (urb->pipe) ? "in" : "out",
+			usb_endpoint_num(&urb->ep->desc),
+			usb_urb_dir_in(urb) ? "in" : "out",
 			status, io->status);
 		// BUG ();
 	}
@@ -379,7 +380,8 @@ int usb_sg_init (
 	 */
 	dma = (dev->dev.dma_mask != NULL);
 	if (dma)
-		io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
+		io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
+				sg, nents);
 	else
 		io->entries = nents;
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index d3c68d8..67e2e58 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -748,7 +748,7 @@ void usb_buffer_unmap(struct urb *urb)
 /**
  * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
  * @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
  * @sg: the scatterlist to map
  * @nents: the number of entries in the scatterlist
  *
@@ -771,14 +771,13 @@ void usb_buffer_unmap(struct urb *urb)
  *
  * Reverse the effect of this call with usb_buffer_unmap_sg().
  */
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
 		      struct scatterlist *sg, int nents)
 {
 	struct usb_bus		*bus;
 	struct device		*controller;
 
 	if (!dev
-			|| usb_pipecontrol(pipe)
 			|| !(bus = dev->bus)
 			|| !(controller = bus->controller)
 			|| !controller->dma_mask)
@@ -786,7 +785,7 @@ int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
 
 	// FIXME generic api broken like pci, can't report errors
 	return dma_map_sg(controller, sg, nents,
-			usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 
 /* XXX DISABLED, no users currently.  If you wish to re-enable this
@@ -799,14 +798,14 @@ int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
 /**
  * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s)
  * @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
  * @sg: the scatterlist to synchronize
  * @n_hw_ents: the positive return value from usb_buffer_map_sg
  *
  * Use this when you are re-using a scatterlist's data buffers for
  * another USB request.
  */
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
 			   struct scatterlist *sg, int n_hw_ents)
 {
 	struct usb_bus		*bus;
@@ -819,20 +818,20 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
 		return;
 
 	dma_sync_sg(controller, sg, n_hw_ents,
-			usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 #endif
 
 /**
  * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
  * @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
  * @sg: the scatterlist to unmap
  * @n_hw_ents: the positive return value from usb_buffer_map_sg
  *
  * Reverses the effect of usb_buffer_map_sg().
  */
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
 			 struct scatterlist *sg, int n_hw_ents)
 {
 	struct usb_bus		*bus;
@@ -845,7 +844,7 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
 		return;
 
 	dma_unmap_sg(controller, sg, n_hw_ents,
-			usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 
 /* format to disable USB on kernel command line is: nousb */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 9d08f5a..019ae96 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1422,13 +1422,13 @@ void usb_buffer_unmap (struct urb *urb);
 #endif
 
 struct scatterlist;
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
 		      struct scatterlist *sg, int nents);
 #if 0
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
 			   struct scatterlist *sg, int n_hw_ents);
 #endif
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
 			 struct scatterlist *sg, int n_hw_ents);
 
 /*-------------------------------------------------------------------*
-- 
1.5.3.4


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel