[PATCH 044/142] USB: SisUSB2VGA: Remove if 0'ed code

From: Felipe Balbi <[email protected]>

Unused code should be removed. We don't need to increase
the size of the file with dead code inside if 0 statements.

Signed-off-by: Felipe Balbi <[email protected]>
Cc: Thomas Winischhofer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/misc/sisusbvga/sisusb.c      |   57 -------------------
 drivers/usb/misc/sisusbvga/sisusb.h      |    4 +-
 drivers/usb/misc/sisusbvga/sisusb_con.c  |   47 ---------------
 drivers/usb/misc/sisusbvga/sisusb_init.c |   90 ------------------------------
 4 files changed, 1 insertions(+), 197 deletions(-)

diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 376f86c..558b94f 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -1261,47 +1261,6 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
 				addr += 4;
 				length -= 4;
 			}
-#if 0		/* That does not work, as EP 2 is an OUT EP! */
-		default:
-			CLEARPACKET(&packet);
-			packet.header  = 0x001f;
-			packet.address = 0x000001a0;
-			packet.data    = 0x00000006;
-			ret |= sisusb_send_bridge_packet(sisusb, 10,
-								&packet, 0);
-			packet.header  = 0x001f;
-			packet.address = 0x000001b0;
-			packet.data    = (length & ~3) | 0x40000000;
-			ret |= sisusb_send_bridge_packet(sisusb, 10,
-								&packet, 0);
-			packet.header  = 0x001f;
-			packet.address = 0x000001b4;
-			packet.data    = addr;
-			ret |= sisusb_send_bridge_packet(sisusb, 10,
-								&packet, 0);
-			packet.header  = 0x001f;
-			packet.address = 0x000001a4;
-			packet.data    = 0x00000001;
-			ret |= sisusb_send_bridge_packet(sisusb, 10,
-								&packet, 0);
-			if (userbuffer) {
-				ret |= sisusb_recv_bulk_msg(sisusb,
-							SISUSB_EP_GFX_BULK_IN,
-							(length & ~3),
-							NULL, userbuffer,
-							bytes_read, 0);
-				if (!ret) userbuffer += (*bytes_read);
-			} else {
-				ret |= sisusb_recv_bulk_msg(sisusb,
-							SISUSB_EP_GFX_BULK_IN,
-							(length & ~3),
-							kernbuffer, NULL,
-							bytes_read, 0);
-				if (!ret) kernbuffer += (*bytes_read);
-			}
-			addr += (*bytes_read);
-			length -= (*bytes_read);
-#endif
 	    }
 
 	    if (ret)
@@ -1401,22 +1360,6 @@ sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data)
 	return(sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data));
 }
 
-#if 0
-
-int
-sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data)
-{
-	return(sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
-}
-
-int
-sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data)
-{
-	return(sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
-}
-
-#endif  /*  0  */
-
 int
 sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
 			u32 dest, int length, size_t *bytes_written)
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 555fed0..dc04739 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -46,9 +46,7 @@
 /* For older kernels, support for text consoles is by default
  * off. To ensable text console support, change the following:
  */
-#if 0
-#define CONFIG_USB_SISUSBVGA_CON
-#endif
+/* #define CONFIG_USB_SISUSBVGA_CON */
 
 /* Version Information */
 
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index 8d0edc8..20938cd 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -373,14 +373,6 @@ sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
 		return;
 
 	/* sisusb->lock is down */
-
-	/* Don't need to put the character into buffer ourselves,
-	 * because the vt does this BEFORE calling us.
-	 */
-#if 0
-	sisusbcon_writew(ch, SISUSB_VADDR(x, y));
-#endif
-
 	if (sisusb_is_inactive(c, sisusb)) {
 		mutex_unlock(&sisusb->lock);
 		return;
@@ -490,10 +482,6 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
 	struct sisusb_usb_data *sisusb;
 	ssize_t written;
 	int cols, length;
-#if 0
-	u16 *src, *dest;
-	int i;
-#endif
 
 	if (width <= 0 || height <= 0)
 		return;
@@ -505,41 +493,6 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
 
 	cols = sisusb->sisusb_num_columns;
 
-	/* Don't need to move data outselves, because
-	 * vt does this BEFORE calling us.
-	 * This is only used by vt's insert/deletechar.
-	 */
-#if 0
-	if (sx == 0 && dx == 0 && width >= c->vc_cols && width <= cols) {
-
-		sisusbcon_memmovew(SISUSB_VADDR(0, dy), SISUSB_VADDR(0, sy),
-					height * width * 2);
-
-	} else if (dy < sy || (dy == sy && dx < sx)) {
-
-		src  = SISUSB_VADDR(sx, sy);
-		dest = SISUSB_VADDR(dx, dy);
-
-		for (i = height; i > 0; i--) {
-			sisusbcon_memmovew(dest, src, width * 2);
-			src  += cols;
-			dest += cols;
-		}
-
-	} else {
-
-		src  = SISUSB_VADDR(sx, sy + height - 1);
-		dest = SISUSB_VADDR(dx, dy + height - 1);
-
-		for (i = height; i > 0; i--) {
-			sisusbcon_memmovew(dest, src, width * 2);
-			src  -= cols;
-			dest -= cols;
-		}
-
-	}
-#endif
-
 	if (sisusb_is_inactive(c, sisusb)) {
 		mutex_unlock(&sisusb->lock);
 		return;
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index d51de0f..5d83582 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -70,96 +70,6 @@ SiSUSB_InitPtr(struct SiS_Private *SiS_Pr)
 }
 
 /*********************************************/
-/*            HELPER: Get ModeID             */
-/*********************************************/
-
-#if 0
-unsigned short
-SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth)
-{
-	unsigned short ModeIndex = 0;
-
-	switch (HDisplay)
-	{
-		case 320:
-			if (VDisplay == 200)
-				ModeIndex = ModeIndex_320x200[Depth];
-			else if (VDisplay == 240)
-				ModeIndex = ModeIndex_320x240[Depth];
-			break;
-		case 400:
-			if (VDisplay == 300)
-				ModeIndex = ModeIndex_400x300[Depth];
-			break;
-		case 512:
-			if (VDisplay == 384)
-				ModeIndex = ModeIndex_512x384[Depth];
-			break;
-		case 640:
-			if (VDisplay == 480)
-				ModeIndex = ModeIndex_640x480[Depth];
-			else if (VDisplay == 400)
-				ModeIndex = ModeIndex_640x400[Depth];
-			break;
-		case 720:
-			if (VDisplay == 480)
-				ModeIndex = ModeIndex_720x480[Depth];
-			else if (VDisplay == 576)
-				ModeIndex = ModeIndex_720x576[Depth];
-			break;
-		case 768:
-			if (VDisplay == 576)
-				ModeIndex = ModeIndex_768x576[Depth];
-			break;
-		case 800:
-			if (VDisplay == 600)
-				ModeIndex = ModeIndex_800x600[Depth];
-			else if (VDisplay == 480)
-				ModeIndex = ModeIndex_800x480[Depth];
-			break;
-		case 848:
-			if (VDisplay == 480)
-				ModeIndex = ModeIndex_848x480[Depth];
-			break;
-		case 856:
-			if (VDisplay == 480)
-				ModeIndex = ModeIndex_856x480[Depth];
-			break;
-		case 960:
-			if (VDisplay == 540)
-				ModeIndex = ModeIndex_960x540[Depth];
-			else if (VDisplay == 600)
-				ModeIndex = ModeIndex_960x600[Depth];
-			break;
-		case 1024:
-			if (VDisplay == 576)
-				ModeIndex = ModeIndex_1024x576[Depth];
-			else if (VDisplay == 768)
-				ModeIndex = ModeIndex_1024x768[Depth];
-			break;
-		case 1152:
-			if (VDisplay == 864)
-				ModeIndex = ModeIndex_1152x864[Depth];
-			break;
-		case 1280:
-			switch (VDisplay) {
-				case 720:
-					ModeIndex = ModeIndex_1280x720[Depth];
-					break;
-				case 768:
-					ModeIndex = ModeIndex_1280x768[Depth];
-					break;
-				case 1024:
-					ModeIndex = ModeIndex_1280x1024[Depth];
-					break;
-			}
-	}
-
-	return ModeIndex;
-}
-#endif  /*  0  */
-
-/*********************************************/
 /*          HELPER: SetReg, GetReg           */
 /*********************************************/
 
-- 
1.5.3.4


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel