[PATCH 137/142] USB: skip autosuspended devices during system resume

From: Alan Stern <[email protected]>

System suspends and hibernation are supposed to be as transparent as
possible.  By this reasoning, if a USB device is already autosuspended
before the system sleep begins then it should remain autosuspended
after the system wakes up.

This patch (as1001) adds a skip_sys_resume flag to the usb_device
structure and uses it to avoid waking up devices which were suspended
when a system sleep began.

Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/core/driver.c |   27 ++++++++++++++++++++-------
 include/linux/usb.h       |    1 +
 2 files changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3f73424..8c1eac2 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1540,9 +1540,21 @@ int usb_external_resume_device(struct usb_device *udev)
 
 static int usb_suspend(struct device *dev, pm_message_t message)
 {
+	struct usb_device	*udev;
+
 	if (!is_usb_device(dev))	/* Ignore PM for interfaces */
 		return 0;
-	return usb_external_suspend_device(to_usb_device(dev), message);
+	udev = to_usb_device(dev);
+
+	/* If udev is already suspended, we can skip this suspend and
+	 * we should also skip the upcoming system resume. */
+	if (udev->state == USB_STATE_SUSPENDED) {
+		udev->skip_sys_resume = 1;
+		return 0;
+	}
+
+	udev->skip_sys_resume = 0;
+	return usb_external_suspend_device(udev, message);
 }
 
 static int usb_resume(struct device *dev)
@@ -1553,13 +1565,14 @@ static int usb_resume(struct device *dev)
 		return 0;
 	udev = to_usb_device(dev);
 
-	/* If autoresume is disabled then we also want to prevent resume
-	 * during system wakeup.  However, a "persistent-device" reset-resume
-	 * after power loss counts as a wakeup event.  So allow a
-	 * reset-resume to occur if remote wakeup is enabled. */
-	if (udev->autoresume_disabled) {
+	/* If udev->skip_sys_resume is set then udev was already suspended
+	 * when the system suspend started, so we don't want to resume
+	 * udev during this system wakeup.  However a reset-resume counts
+	 * as a wakeup event, so allow a reset-resume to occur if remote
+	 * wakeup is enabled. */
+	if (udev->skip_sys_resume) {
 		if (!(udev->reset_resume && udev->do_remote_wakeup))
-			return -EPERM;
+			return -EHOSTUNREACH;
 	}
 	return usb_external_resume_device(udev);
 }
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c10935f..c5c8f16 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -430,6 +430,7 @@ struct usb_device {
 	unsigned persist_enabled:1;	/* USB_PERSIST enabled for this dev */
 	unsigned autosuspend_disabled:1; /* autosuspend and autoresume */
 	unsigned autoresume_disabled:1;  /*  disabled by the user */
+	unsigned skip_sys_resume:1;	/* skip the next system resume */
 #endif
 };
 #define	to_usb_device(d) container_of(d, struct usb_device, dev)
-- 
1.5.3.4


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel