Re: ti_usb_3410_5052 breakage in 2.6.24-rc1

On Thu, 1 Nov 2007, Steven King wrote:

> Per a suggestion by David Brownwell, rebuilt with CONFIG_USB_DEBUG enabled and 
> loading usbserial and ti_usb_3410_5052 with debug=1, I see in 'dmesg'
> 
> 'drivers/usb/serial/usb-serial.c: wrong number of endpoints'
> 
>  which is pretty much what I expected, throwing some more printk's in 
> usb-serial gives:
> 
> drivers/usb/serial/usb-serial.c: num_interrupt_in = 0, expected 1
> drivers/usb/serial/usb-serial.c: num_interrupt_out = 0, expected 0
> drivers/usb/serial/usb-serial.c: num_bulk_in = 0, expected 1
> drivers/usb/serial/usb-serial.c: num_bulk_out = 1, expected 1
> 
> Okay, so
> ---
> 
> Changing num_interrupt_in and num_bulk_in from 1 to NUM_DONT_CARE makes 
> ti_usb_3410_5052 work again, but is it the right thing to do?

It may or may not be the right thing to do, but it definitely isn't
the correct way to solve your problem.

The real question is why 2.6.24-rc1 doesn't like the second 
configuration descriptor.  To answer it, you should see what shows up 
in the dmesg log when you first plug in the device on a kernel with 
CONFIG_USB_DEBUG enabled.

Alan Stern


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel