Re: irq 21: nobody cared 2.6.24-rc1

On Thu, 25 Oct 2007 10:45:36 +0200
Bongani Hlope <[email protected]> wrote:

> Booting with irqpoll works
> 
> ls /proc/irq/21/ (with irqpoll)
> ehci_hcd:usb1/  smp_affinity  uhci_hcd:usb2/  uhci_hcd:usb3/  uhci_hcd:usb4/
> 
> irq 21: nobody cared (try booting with the "irqpoll" option)
> 
>  Call Trace:
>   <IRQ>  [__report_bad_irq+56/124] __report_bad_irq+0x38/0x7c
>   <IRQ>  [<ffffffff802622eb>] __report_bad_irq+0x38/0x7c
>   [note_interrupt+546/617] note_interrupt+0x222/0x269
>   [<ffffffff80262551>] note_interrupt+0x222/0x269
>   [handle_fasteoi_irq+179/221] handle_fasteoi_irq+0xb3/0xdd
>   [<ffffffff80262bfa>] handle_fasteoi_irq+0xb3/0xdd
>   [do_IRQ+246/361] do_IRQ+0xf6/0x169
>   [<ffffffff8020e271>] do_IRQ+0xf6/0x169
>   [ret_from_intr+0/10] ret_from_intr+0x0/0xa
>   [<ffffffff8020be41>] ret_from_intr+0x0/0xa
>   <EOI>  [unmap_vmas+665/1878] unmap_vmas+0x299/0x756
>   <EOI>  [<ffffffff802728fc>] unmap_vmas+0x299/0x756
>   [unmap_vmas+1838/1878] unmap_vmas+0x72e/0x756
>   [<ffffffff80272d91>] unmap_vmas+0x72e/0x756
>   [exit_mmap+137/295] exit_mmap+0x89/0x127
>  > [<ffffffff80276592>] exit_mmap+0x89/0x127
>   [mmput+40/164] mmput+0x28/0xa4
>  [<ffffffff802314dc>] mmput+0x28/0xa4
>   [flush_old_exec+1543/2268] flush_old_exec+0x607/0x8dc
>   [<ffffffff8028fafe>] flush_old_exec+0x607/0x8dc
>   [load_elf_binary+0/7165] load_elf_binary+0x0/0x1bfd
>   [<ffffffff802bb46b>] load_elf_binary+0x0/0x1bfd
>   [load_elf_binary+0/7165] load_elf_binary+0x0/0x1bfd
>   [<ffffffff802bb46b>] load_elf_binary+0x0/0x1bfd
>   [load_elf_binary+1337/7165] load_elf_binary+0x539/0x1bfd
>   [<ffffffff802bb9a4>] load_elf_binary+0x539/0x1bfd
>   [__strnlen_user+33/45] __strnlen_user+0x21/0x2d
>   [<ffffffff80313be1>] __strnlen_user+0x21/0x2d
>   [put_arg_page+9/11] put_arg_page+0x9/0xb
>   [<ffffffff8028e81b>] put_arg_page+0x9/0xb
>   [load_elf_binary+0/7165] load_elf_binary+0x0/0x1bfd
>   [<ffffffff802bb46b>] load_elf_binary+0x0/0x1bfd
>   [search_binary_handler+227/565] search_binary_handler+0xe3/0x235
>   [<ffffffff8028ec71>] search_binary_handler+0xe3/0x235
>   [do_execve+357/451] do_execve+0x165/0x1c3
>   [<ffffffff80290293>] do_execve+0x165/0x1c3
>   [sys_execve+54/145] sys_execve+0x36/0x91
>   [<ffffffff8020a42f>] sys_execve+0x36/0x91
>   [stub_execve+103/176] stub_execve+0x67/0xb0
>   [<ffffffff8020bcf7>] stub_execve+0x67/0xb0
> 
>  handlers:
>  [_end+128171676/2130295572] (usb_hcd_irq+0x0/0x5d [usbcore])
>  [<ffffffff880a0388>] (usb_hcd_irq+0x0/0x5d [usbcore])
>  [_end+128171676/2130295572] (usb_hcd_irq+0x0/0x5d [usbcore])
>  [<ffffffff880a0388>] (usb_hcd_irq+0x0/0x5d [usbcore])
>  [_end+128171676/2130295572] (usb_hcd_irq+0x0/0x5d [usbcore])
>  [<ffffffff880a0388>] (usb_hcd_irq+0x0/0x5d [usbcore])
>  [_end+128171676/2130295572] (usb_hcd_irq+0x0/0x5d [usbcore])
>  [<ffffffff880a0388>] (usb_hcd_irq+0x0/0x5d [usbcore])
>  Disabling IRQ #21
> 

Was any earlier kernel version OK?  2.6.23?

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel