Re: directIO on usb mass storage/scsi device in 2.4 kernel

On Thu, 13 Dec 2007, syed khader wrote:

> hi 
>   I am having problems getting directIO(file write
> using O_DIRECT) work on scsi device(seagate usb hard
> drive) on an ARM platform.
>  I really dont know if it is a sg driver or USB
> problem, so I am posting it here.
>   Any pointers would definitely help.
> Thanks
> Syed

> usb-storage: *** thread awakened.
> usb-storage: Command WRITE_10 (10 bytes)
> usb-storage: 2a 00 00 00 10 c7 00 00 60 00 00 00
> usb-storage: Bulk command S 0x43425355 T 0x27 Trg 0
> LUN 0 L 49152 F 0 CL 10
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_transfer_partial(): xfer 4096
> bytes
> ehci_hcd <NULL>: devpath 1 ep2out 3strikes
> usb-storage: usb_stor_bulk_msg() returned -71 xferred
> 512/4096

This is a low-level hardware error.  It probably has nothing at all to 
do with directIO.

Alan Stern


-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel