usb-storage and Motorola Z6

Andreas Koenecke <[email protected]>
Newsgroups gmane.linux.usb.user
Message-ID <[email protected]>
Hallo.

I've got a new Motorola Z6 GSM phone, which should be "usb-storage capable"
(and ist is in Windows). But in Linux (Kernel 2.6.22.5) there are no mountable
block-devices:

------------------------------------------------------------------------------
Aug 28 09:54:28 kocom kernel: usb 3-1: new high speed USB device using
ehci_hcd and address 5

Aug 28 09:54:28 kocom kernel: usb 3-1: configuration #1 chosen from 1 choice

Aug 28 09:54:28 kocom kernel: scsi4 : SCSI emulation for USB Mass Storage
 devices

Aug 28 09:54:28 kocom kernel: usb-storage: device found at 5

Aug 28 09:54:28 kocom kernel: usb-storage: waiting for device to settle before
 scanning

Aug 28 09:54:33 kocom kernel: usb-storage: device scan complete

Aug 28 09:54:33 kocom kernel: scsi 4:0:0:0: Direct-Access     Motorola MSnc.
 PQ: 1 ANSI: 0 CCS

Aug 28 09:54:33 kocom kernel: scsi 4:0:0:1: Direct-Access     Motorola MSnc.
 PQ: 1 ANSI: 0 CCS

Aug 28 09:54:33 kocom kernel: scsi 4:0:0:0: Attached scsi generic sg2 type 0

Aug 28 09:54:33 kocom kernel: scsi 4:0:0:1: Attached scsi generic sg3 type 0

Aug 28 10:02:47 kocom kernel: usb 3-1: USB disconnect, address 5
---------------------------------------------------------------------------------

Output with CONFIG_USB_STORAGE_DEBUG:

---------------------------------------------------------------------------------
Aug 28 19:38:31 kocom kernel: usb 3-1: new high speed USB device using ehci_hcd and address 8
Aug 28 19:38:32 kocom kernel: usb 3-1: configuration #1 chosen from 1 choice
Aug 28 19:38:32 kocom kernel: usb-storage: USB Mass Storage device detected
Aug 28 19:38:32 kocom kernel: usb-storage: -- associate_dev
Aug 28 19:38:32 kocom kernel: usb-storage: Vendor: 0x22b8, Product: 0x6426, Revision: 0x0101
Aug 28 19:38:32 kocom kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Aug 28 19:38:32 kocom kernel: usb-storage: Transport: Bulk
Aug 28 19:38:32 kocom kernel: usb-storage: Protocol: Transparent SCSI
Aug 28 19:38:32 kocom kernel: scsi9 : SCSI emulation for USB Mass Storage devices
Aug 28 19:38:32 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:32 kocom kernel: usb-storage: device found at 8
Aug 28 19:38:32 kocom kernel: usb-storage: waiting for device to settle before scanning
Aug 28 19:38:37 kocom kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Aug 28 19:38:37 kocom kernel: usb-storage: GetMaxLUN command result is 1, data is 1
Aug 28 19:38:37 kocom kernel: usb-storage: device scan complete
Aug 28 19:38:37 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:37 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:37 kocom kernel: usb-storage: Command INQUIRY (6 bytes)
Aug 28 19:38:37 kocom kernel: usb-storage:  12 00 00 00 24 00
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Aug 28 19:38:37 kocom kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 19:38:37 kocom kernel: usb-storage: Status code 0; transferred 31/31
Aug 28 19:38:37 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk command transfer result=0
Aug 28 19:38:37 kocom kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Aug 28 19:38:37 kocom kernel: usb-storage: Status code 0; transferred 36/36
Aug 28 19:38:37 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk data transfer result 0x0
Aug 28 19:38:37 kocom kernel: usb-storage: Attempting to get CSW...
Aug 28 19:38:37 kocom kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 19:38:37 kocom kernel: usb-storage: Status code 0; transferred 13/13
Aug 28 19:38:37 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk status result = 0
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Aug 28 19:38:37 kocom kernel: usb-storage: scsi cmd done, result=0x0
Aug 28 19:38:37 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:37 kocom kernel: scsi 9:0:0:0: Direct-Access     Motorola MSnc.                 PQ: 1 ANSI: 0 CCS
Aug 28 19:38:37 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:37 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:37 kocom kernel: usb-storage: Command INQUIRY (6 bytes)
Aug 28 19:38:37 kocom kernel: usb-storage:  12 00 00 00 24 00
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk Command S 0x43425355 T 0x2 L 36 F 128 Trg 0 LUN 1 CL 6
Aug 28 19:38:37 kocom kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 19:38:37 kocom kernel: usb-storage: Status code 0; transferred 31/31
Aug 28 19:38:37 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk command transfer result=0
Aug 28 19:38:37 kocom kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Aug 28 19:38:37 kocom kernel: usb-storage: Status code 0; transferred 36/36
Aug 28 19:38:37 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk data transfer result 0x0
Aug 28 19:38:37 kocom kernel: usb-storage: Attempting to get CSW...
Aug 28 19:38:37 kocom kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 19:38:37 kocom kernel: usb-storage: Status code 0; transferred 13/13
Aug 28 19:38:37 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk status result = 0
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Aug 28 19:38:37 kocom kernel: usb-storage: Bulk logical error
Aug 28 19:38:37 kocom kernel: usb-storage: -- transport indicates error, resetting
Aug 28 19:38:37 kocom kernel: usb-storage: storage_pre_reset
Aug 28 19:38:37 kocom kernel: usb 3-1: reset high speed USB device using ehci_hcd and address 8
Aug 28 19:38:38 kocom kernel: usb-storage: storage_post_reset
Aug 28 19:38:38 kocom kernel: usb-storage: usb_reset_composite_device returns 0
Aug 28 19:38:38 kocom kernel: usb-storage: scsi cmd done, result=0x70000
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:38 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:38 kocom kernel: usb-storage: Command INQUIRY (6 bytes)
Aug 28 19:38:38 kocom kernel: usb-storage:  12 00 00 00 24 00
Aug 28 19:38:38 kocom kernel: usb-storage: Bulk Command S 0x43425355 T 0x3 L 36 F 128 Trg 0 LUN 1 CL 6
Aug 28 19:38:38 kocom kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 19:38:38 kocom kernel: usb-storage: Status code 0; transferred 31/31
Aug 28 19:38:38 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:38 kocom kernel: usb-storage: Bulk command transfer result=0
Aug 28 19:38:38 kocom kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Aug 28 19:38:38 kocom kernel: usb-storage: Status code 0; transferred 36/36
Aug 28 19:38:38 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:38 kocom kernel: usb-storage: Bulk data transfer result 0x0
Aug 28 19:38:38 kocom kernel: usb-storage: Attempting to get CSW...
Aug 28 19:38:38 kocom kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 19:38:38 kocom kernel: usb-storage: Status code 0; transferred 13/13
Aug 28 19:38:38 kocom kernel: usb-storage: -- transfer complete
Aug 28 19:38:38 kocom kernel: usb-storage: Bulk status result = 0
Aug 28 19:38:38 kocom kernel: usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
Aug 28 19:38:38 kocom kernel: usb-storage: scsi cmd done, result=0x0
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:38 kocom kernel: scsi 9:0:0:1: Direct-Access     Motorola MSnc.                 PQ: 1 ANSI: 0 CCS
Aug 28 19:38:38 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:38 kocom kernel: usb-storage: Bad LUN (0:2)
Aug 28 19:38:38 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:38 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:38 kocom kernel: usb-storage: Bad target number (1:0)
Aug 28 19:38:38 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:38 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:38 kocom kernel: usb-storage: Bad target number (2:0)
Aug 28 19:38:38 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:38 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:39 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:39 kocom kernel: usb-storage: Bad target number (3:0)
Aug 28 19:38:39 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:39 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:39 kocom kernel: usb-storage: Bad target number (4:0)
Aug 28 19:38:39 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:39 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:39 kocom kernel: usb-storage: Bad target number (5:0)
Aug 28 19:38:39 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:39 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:39 kocom kernel: usb-storage: Bad target number (6:0)
Aug 28 19:38:39 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:39 kocom kernel: usb-storage: queuecommand called
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread awakened.
Aug 28 19:38:39 kocom kernel: usb-storage: Bad target number (7:0)
Aug 28 19:38:39 kocom kernel: usb-storage: scsi cmd done, result=0x40000
Aug 28 19:38:39 kocom kernel: usb-storage: *** thread sleeping.
Aug 28 19:38:39 kocom kernel: scsi 9:0:0:0: Attached scsi generic sg2 type 0
Aug 28 19:38:39 kocom kernel: scsi 9:0:0:1: Attached scsi generic sg3 type 0
-------------------------------------------------------------------------------------------

'lsusb -v':
--------------------------------------------------------------------------------------------

Bus 003 Device 008: ID 22b8:6426 Motorola PCS 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x22b8 Motorola PCS
  idProduct          0x6426 
  bcdDevice            1.01
  iManufacturer           3 Motorola Inc.
  iProduct                2 MS
  iSerial                 4 9083519724BA0E0A0E
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          7 msc
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              8 Motorola Mass Storage - Bulk Only
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations     64

Bus 003 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.22.5 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:02.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x40
  PortPwrCtrlMask    0x40 
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power

Bus 002 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.22.5 ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:02.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0002
    No power switching (usb 1.0)
    Ganged overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x40
  PortPwrCtrlMask    0x40 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power

Bus 001 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.22.5 ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:02.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0002
    No power switching (usb 1.0)
    Ganged overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x40
  PortPwrCtrlMask    0x40 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
--------------------------------------------------------------------------------------------------

'cat /proc/bus/usb/devices':
--------------------------------------------------------------------------------------------------
T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=6426 Rev= 1.01
S:  Manufacturer=Motorola Inc.
S:  Product=MS
S:  SerialNumber=9083519724BA0E0A0E
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
-----------------------------------------------------------------------------------------------------

'cat /proc/scsi/scsi':
-----------------------------------------------------------------------------------------------------
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
  Vendor: PIONEER  Model: DVD-ROM DVD-305  Rev: 1.00
  Type:   CD-ROM                           ANSI  SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: Maxtor 6L300S0   Rev: BACE
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi9 Channel: 00 Id: 00 Lun: 00
  Vendor: Motorola Model: MSnc.            Rev:
  Type:   Direct-Access                    ANSI  SCSI revision: 00
Host: scsi9 Channel: 00 Id: 00 Lun: 01
  Vendor: Motorola Model: MSnc.            Rev:
  Type:   Direct-Access                    ANSI  SCSI revision: 00
-----------------------------------------------------------------------------------------------------

What can I do?

Regards,

Andreas


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.