Re: Device is not in smartctl database. Consequences and solution?

Ivan Lezhnjov Jr. wrote:
> On Nov 29, 2013, at 11:22 PM, Christian Franke <...> wrote:
>
>> ..
>>
>> For still missing entries, you could add a local drive database entry (usually) at /etc/smartd_drivedb.h.
> No luck.
>
> If I pass "-d sat" the drives can be opened, but apparently smartctl/smartd treats them as different devices, because this is how the drives are identified by the kernel:
>
>>   localhost kernel: [547111.752845] scsi 46:0:0:0: Direct-Access     WD       Elements 1048    1022 PQ: 0 ANSI: 6
> and this is how smartmontools sees them:
>
>> % smartctl -i -d sat /dev/sdc
>> smartctl 5.42 2011-10-20 r3458 [i686-linux-3.4.2-2-ARCH] (local build)
>> Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>>
>> === START OF INFORMATION SECTION ===
>> Model Family:     Western Digital My Passport (USB, AF)
>> Device Model:     WDC WD20NMVW-11AV3S0
>> ...

The "Model Family" info is printed from the drivedb.h entry which 
matches the "Device Model" string from ATA IDENTIFY data. The USB ID has 
no influence.

Some WD "Elements" and "My Passport" models use the same disk models. I 
decided to use the latter name in drivedb.h entries.


> Without -d sat:
>
>> % smartctl -P show /dev/sdc
>> smartctl 5.42 2011-10-20 r3458 [i686-linux-3.4.2-2-ARCH] (local build)
>> Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>>
>> /dev/sdc: Unknown USB bridge [0x1058:0x1048 (0x1022)]
>> Smartctl: please specify device type with the -d option.

This is as expected because the USB ID drivedb entry is (only) used to 
set the -d option for the ATA pass-through protocol the USB bridge supports.


>> ...
> What is 0x1022 in parenthesis? Alternate iD? Should it ever be specified in drivedb.h?

This is the USB bcdDevice info. Only needed if different versions with 
same USB ID require different settings.


> Also, after reading man smartctl about -B argument,  one question remains open. Is /etc/smart_drivedb.h used by default instead of builtin database, or one in /usr, or is information used to extend the existing database?

Entries in /etc/smart_drivedb.h are checked first and therefore could 
also be used to override entries in /usr/share/smartmontools.


> Lastly, where would I submit this missing drive information to include in db file that is distributed with smartmontools?

Use drive database mailing list, see the FAQ.

Thanks,
Christian


------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT 
organizations don't have a clear picture of how application performance 
affects their revenue. With AppDynamics, you get 100% visibility into your 
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk