Re: SMART overall-health self-assessment test result: FAILED! No failed Attributes found.
bege <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
Hi Christian, thank you very much for your answer. > -------- Original Nachricht/Message --------- > Betreff/Subject: *Re: [smartmontools-support] SMART overall-health > self-assessment test result: FAILED! No failed Attributes found.* > Datum/Date: *Mittwoch, 7. Mai 2014 19:44:24* > Von/From: Christian Franke > > > Hi Bernd, > > bege wrote: >> >>> JMicron implements a special SCSI command for SMART STATUS. It >>> apparently does not work properly here and returns a bogus result. >> How can I suppress this error message that repeatedly comes from smartd. > > Remove -H directive from smartd.conf line. If -a is used, replace with: > -f -t -l error -l selftest -l selfteststs accomplished. > > Could you possibly > 1. retry the test on a Linux box or with a Live CD on same machine? > http://sourceforge.net/apps/trac/smartmontools/wiki/LiveCDs I will try with a Linux CD as soon as possible. That will last at least a few days. > > 2. retry the test with the disk removed from the enclosure and > connected to a MB SATA port? I only have a notebook computer and this one external HDD. So I have no means to connect the HDD in a different way. Regards Bernd ------------------------------------------------------------------------------ Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM now http://p.sf.net/sfu/perforce _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support