Re: [6.2/Windows] Short self-test routine: "Function not implemented"
Ozy de Jong <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <zarafa.53888629.1617.1c392059520e6c2b@badminC6> |
Hello, I can think of two possibile issues: - Did you enable SMART in your BIOS ? - What kind of hard drive and disk controller do you have ? Most of the time smartmontools cannot get infos if your disk controller doesn't support command passthrough or if you have a RAID. Regards, Ozy. -----Message initial----- > De:Gilles <[email protected]> > Envoyé: vendredi 30 mai 2014 12:15 > À: [email protected] > Sujet: [smartmontools-support] [6.2/Windows] Short self-test routine: "Function not implemented" > > Hello > > Before asking in the ml, I checked the FAQ but found no entry. I tried > searching Gmane's archives, but it currently says "You don't have > permission to access / on this server." > > I just installed Smartmontools on Windows 7 through Smartmontools-win > (www.netpower.fr) and am learning about how to use Smartmontools. > > I opened a DOS box with Admin rights, but apparently, smartclt.exe > won't run the short self-test: > > ================= > c:\Program Files\smartmontools for Windows\bin>smartctl -H /dev/sda > smartctl 6.2 2013-07-26 r3841 [i686-w64-mingw32-win7-sp1] (sf-6.2-1) > Copyright (C) 2002-13, Bruce Allen, Christian Franke, > www.smartmontools.org > > Read SMART Thresholds failed: Function not implemented > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > ================= > c:\Program Files\smartmontools for Windows\bin>smartctl -t short > /dev/sda > smartctl 6.2 2013-07-26 r3841 [i686-w64-mingw32-win7-sp1] (sf-6.2-1) > Copyright (C) 2002-13, Bruce Allen, Christian Franke, > www.smartmontools.org > > === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === > Sending command: "Execute SMART Short self-test routine immediately in > off-line mode". > Command "Execute SMART Short self-test routine immediately in off-line > mode" failed: Function not implemented > ================= > > Any idea why it won't run the test? > > Thank you. > > > ------------------------------------------------------------------------------ > Time is money. Stop wasting it! Get your web API in 5 minutes. > www.restlet.com/download > http://p.sf.net/sfu/restlet > _______________________________________________ > Smartmontools-support mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/smartmontools-support > ------------------------------------------------------------------------------ Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support