smart Airflow_Temperature_Cel attribute value on Micron RealSSD

Janardhan Molumuri <[email protected]>
Newsgroups gmane.linux.utilities.smartmontools
Message-ID <CAE3V+3N9+cRTD7DS-eqFRBOG2mbJ=c8YMw3KgK6Ta_PpRzJs5A@mail.gmail.com>
Hi,

On systems with Micron ReallSSDs, I noticed that Airflow_Temperature_Cel
values are not normalized, instead real values causing the smarttools
smartctl health check to report failures.

The drive type is present in the smarttools database. Is there a
generalized way to run checks so that the reporting is consistent across
all the disks [or] we need to intercept these kind of divergences.

Any ideas on these values? Is there way to identify if the reported value
is real vs normalized with smarttools?

>From the doc, I read that as long as the value is higher than the threshold
its good (i.e. normalized value 100-<realvalue>) otherwise its bad.

Janny

E.g.

#smartctl /dev/bus/0 -d sat+megaraid,9 -H
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-2.6.32-431.17.1.el6.x86_64]
(local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
Failed Attributes:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED
 WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0023   019   033   069    Pre-fail  Always
FAILING_NOW 19 (Min/Max 17/33)

#

#./smartmontools-6.2/sbin/smartctl /dev/bus/0 -d sat+megaraid,9 -a
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-2.6.32-431.17.1.el6.x86_64]
(local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Crucial/Micron RealSSD m4/C400/P400
Device Model:     MTFDDAK256MAR-1K1AA  90Y8644 90Y8647IBM
Serial Number:    033F8A54
LU WWN Device Id: 5 00a075 1033f8a54
Firmware Version: MA44
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Jun 21 02:06:14 2014 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection:
Enabled.
Self-test execution status:      (   0) The previous self-test routine
completed
                                        without error or no self-test has
ever
                                        been run.
Total time to complete Offline
data collection:                ( 1190) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  19) minutes.
Conveyance self-test routine
recommended polling time:        (   3) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control
supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED
 WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always
    -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   001    Old_age   Always
    -       0
  9 Power_On_Hours          0x0032   100   100   001    Old_age   Always
    -       14019
 12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always
    -       18
170 Grown_Failing_Block_Ct  0x0033   100   100   010    Pre-fail  Always
    -       0
171 Program_Fail_Count      0x0032   100   100   001    Old_age   Always
    -       0
172 Erase_Fail_Count        0x0032   100   100   001    Old_age   Always
    -       0
173 Wear_Leveling_Count     0x0033   099   099   000    Pre-fail  Always
    -       56
174 Unexpect_Power_Loss_Ct  0x0032   100   100   001    Old_age   Always
    -       15
181 Non4k_Aligned_Access    0x0022   100   100   001    Old_age   Always
    -       0 0 0
183 SATA_Iface_Downshift    0x0032   100   100   001    Old_age   Always
    -       0
184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always
    -       0
187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always
    -       0
188 Command_Timeout         0x0032   100   100   001    Old_age   Always
    -       0
189 Factory_Bad_Block_Ct    0x000e   100   100   001    Old_age   Always
    -       90
190 Airflow_Temperature_Cel 0x0023   019   033   069    Pre-fail  Always
FAILING_NOW 19 (Min/Max 17/33)
194 Temperature_Celsius     0x0022   019   033   000    Old_age   Always
    -       19 (Min/Max 17/33)
195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always
    -       105
196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always
    -       0
197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always
    -       0
198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline
   -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always
    -       2
202 Perc_Rated_Life_Used    0x0018   099   099   001    Old_age   Offline
   -       1
206 Write_Error_Rate        0x000e   100   100   001    Old_age   Always
    -       0
231 Temperature_Celsius     0x0033   099   099   010    Pre-fail  Always
    -       0
225 Unknown_SSD_Attribute   0x0000   100   100   000    Old_age   Offline
   -       25994335754
242 Total_LBAs_Read         0x0002   100   100   001    Old_age   Always
    -       8736

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

#

------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems

_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.