Re: I don't understand error log

El 24/06/14 11:01, Luis Muñoz Fuente escribió:
> Hello:
> I don't understand this message of smartctl -l error /dev/sda:
> 
> 
> Error 1 occurred at disk power-on lifetime: 21 hours (0 days + 21 
> hours)
>    When the command that caused the error occurred, the device was in an 
> unknown state.
> 
>    After command completion occurred, registers were:
>    ER ST SC SN CL CH DH
>    -- -- -- -- -- -- --
>    10 51 01 7b df 4c ab  Error: IDNF at LBA = 0x0b4cdf7b = 189587323
> 
>    Commands leading to the command that caused the error were:
>    CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>    -- -- -- -- -- -- -- --  ----------------  --------------------
>    ca 00 01 7b df 4c ab 08      00:04:44.912  WRITE DMA
>    ca 00 01 40 00 00 a0 08      00:04:44.912  WRITE DMA
>    c8 00 11 16 08 04 a2 08      00:04:44.912  READ DMA
>    c8 00 56 bf 08 04 a1 08      00:04:44.912  READ DMA
>    c8 00 56 69 08 04 a1 08      00:04:44.912  READ DMA
> 


I read that IDNF error is:

Address Not Found Error. The Identify Drive Command has not received an
acceptable response from the drive. This may be due to a defect. Ensure
that you are using the latest version of diagnostic utility and that
your cable is in good working condition. Retest. Replace the drive if
the error repeats.




The short and long test reports no error.
smartctl -t short /dev/sda
smartctl -t long /dev/sda


And smartctl -A /dev/sda report no error


And smartctl -H /dev/sda report no error.


Can I ignore this errors?

Thanks

------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft