Cannot find error reported from smartd
bege <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
Hi, after having installed this release > Please test r3922 release from here: > http://smartmontools.no-ip.org/ the error with health overall check has vanished, but now I receive error messages from smartd I cannot find the reason for. The message came when the external HDD (sdb) was offline. So the message must be for the internal HDD (sda). Attached are the smartd.config and the the part of smart.log with the release named above. Smartd shall only show new SMART errors. Did I oversee any new errors or is something wrong with the new release? Thanks. Bernd ------------------------------------------------------------------------------ _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support
smart.log.part.txt
(text/plain, 19.7 KB)
------------------------------------------------------------------------------------------------- 29-06-2014 17H44m52s
smartctl 6.3 2014-06-23 r3922 [i686-w64-mingw32-win7(64)-sp1] (cf-20140623)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M5
Device Model: SAMSUNG HM160HI
Serial Number: S10UJD0S560510
LU WWN Device Id: 5 0f0000 003560510
Firmware Version: HH100-08
User Capacity: 160.041.885.696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Sun Jun 29 17:44:52 2014 MS
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 55) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2000
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6843
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 7020
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 5
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3523
191 G-Sense_Error_Rate 0x0032 002 002 000 Old_age Always - 999999
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 211
194 Temperature_Celsius 0x0022 100 070 000 Old_age Always - 46 (Min/Max 10/56)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 097 097 000 Old_age Always - 3227
225 Load_Cycle_Count 0x0032 081 081 000 Old_age Always - 201226
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7018 -
# 2 Short offline Completed without error 00% 6973 -
# 3 Short offline Completed without error 00% 6971 -
# 4 Short offline Completed without error 00% 6965 -
# 5 Extended offline Aborted by host 60% 6962 -
# 6 Short offline Completed without error 00% 6953 -
# 7 Short offline Completed without error 00% 6947 -
# 8 Short offline Completed without error 00% 6930 -
# 9 Short offline Completed without error 00% 6920 -
#10 Short offline Completed without error 00% 6912 -
#11 Extended offline Completed without error 00% 6894 -
#12 Short offline Completed without error 00% 6888 -
#13 Short offline Completed without error 00% 6881 -
#14 Short offline Completed without error 00% 6867 -
#15 Extended offline Completed without error 00% 6856 -
#16 Short offline Completed without error 00% 6855 -
#17 Short offline Completed without error 00% 6854 -
#18 Short offline Completed without error 00% 6830 -
#19 Short offline Completed without error 00% 6813 -
#20 Short offline Completed without error 00% 6784 -
#21 Short offline Completed without error 00% 6777 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------------------------- 04-07-2014 19H52m02s
smartctl 6.3 2014-06-23 r3922 [i686-w64-mingw32-win7(64)-sp1] (cf-20140623)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M5
Device Model: SAMSUNG HM160HI
Serial Number: S10UJD0S560510
LU WWN Device Id: 5 0f0000 003560510
Firmware Version: HH100-08
User Capacity: 160.041.885.696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Fri Jul 04 19:52:02 2014 MS
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 55) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2062
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6863
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 7044
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 5
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3533
191 G-Sense_Error_Rate 0x0032 002 002 000 Old_age Always - 999999
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 211
194 Temperature_Celsius 0x0022 088 070 000 Old_age Always - 50 (Min/Max 10/56)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 097 097 000 Old_age Always - 3237
225 Load_Cycle_Count 0x0032 081 081 000 Old_age Always - 201516
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7037 -
# 2 Short offline Aborted by host 80% 7035 -
# 3 Short offline Completed without error 00% 7018 -
# 4 Short offline Completed without error 00% 6973 -
# 5 Short offline Completed without error 00% 6971 -
# 6 Short offline Completed without error 00% 6965 -
# 7 Extended offline Aborted by host 60% 6962 -
# 8 Short offline Completed without error 00% 6953 -
# 9 Short offline Completed without error 00% 6947 -
#10 Short offline Completed without error 00% 6930 -
#11 Short offline Completed without error 00% 6920 -
#12 Short offline Completed without error 00% 6912 -
#13 Extended offline Completed without error 00% 6894 -
#14 Short offline Completed without error 00% 6888 -
#15 Short offline Completed without error 00% 6881 -
#16 Short offline Completed without error 00% 6867 -
#17 Extended offline Completed without error 00% 6856 -
#18 Short offline Completed without error 00% 6855 -
#19 Short offline Completed without error 00% 6854 -
#20 Short offline Completed without error 00% 6830 -
#21 Short offline Completed without error 00% 6813 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------------------------- 11-07-2014 19H59m15s
smartctl 6.3 2014-06-23 r3922 [i686-w64-mingw32-win7(64)-sp1] (cf-20140623)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M5
Device Model: SAMSUNG HM160HI
Serial Number: S10UJD0S560510
LU WWN Device Id: 5 0f0000 003560510
Firmware Version: HH100-08
User Capacity: 160.041.885.696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Fri Jul 11 19:59:15 2014 MS
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 23) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 55) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2000
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6894
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 7066
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 5
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3549
191 G-Sense_Error_Rate 0x0032 002 002 000 Old_age Always - 999999
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 212
194 Temperature_Celsius 0x0022 103 070 000 Old_age Always - 45 (Min/Max 10/56)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 097 097 000 Old_age Always - 3254
225 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 202232
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 70% 7063 -
# 2 Short offline Completed without error 00% 7055 -
# 3 Short offline Completed without error 00% 7037 -
# 4 Short offline Aborted by host 80% 7035 -
# 5 Short offline Completed without error 00% 7018 -
# 6 Short offline Completed without error 00% 6973 -
# 7 Short offline Completed without error 00% 6971 -
# 8 Short offline Completed without error 00% 6965 -
# 9 Extended offline Aborted by host 60% 6962 -
#10 Short offline Completed without error 00% 6953 -
#11 Short offline Completed without error 00% 6947 -
#12 Short offline Completed without error 00% 6930 -
#13 Short offline Completed without error 00% 6920 -
#14 Short offline Completed without error 00% 6912 -
#15 Extended offline Completed without error 00% 6894 -
#16 Short offline Completed without error 00% 6888 -
#17 Short offline Completed without error 00% 6881 -
#18 Short offline Completed without error 00% 6867 -
#19 Extended offline Completed without error 00% 6856 -
#20 Short offline Completed without error 00% 6855 -
#21 Short offline Completed without error 00% 6854 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Aborted_by_host [70% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartd.conf
(text/plain, 576 B)
# This file was generated on 26 Feb 2014 by smartmontools for Windows package # http://www.netpower.fr # edited by bege on 01 Jul 2014 /dev/sda -H -l error -f -C 197+ -U 198+ -t -l selftest -l selfteststs -I 194 -m <nomailer> -M exec "C:\Program Files (x86)\smartmontools for Windows\bin\erroraction.cmd" -n standby,q -s (S/../../[1|2|3|4|6|7]/14|L/../../[5]/14) /dev/sdb -l error -f -C 197+ -U 198+ -t -l selftest -l selfteststs -I 194 -m <nomailer> -M exec "C:\Program Files (x86)\smartmontools for Windows\bin\erroraction.cmd" -s (S/../../[1|2|3|4|6|7]/14|L/../../[5]/14)