new wd elements
Luigi Tarenga <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
hi,
I have a WD Elements 1.5TB usb 3.0. The drive is not listed
at this page: http://www.smartmontools.org/wiki/Supported_USB-Devices
[root@lizard ~]# lsusb | grep West
Bus 006 Device 003: ID 1058:10b8 Western Digital Technologies, Inc.
here is the output of smartmontool:
[root@lizard ~]# smartctl -V
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.12.0-v1] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License; either
version 2, or (at your option) any later version.
See http://www.gnu.org for further details.
smartmontools release 5.43 dated 2012-06-30 at 14:03:01 UTC
smartmontools SVN rev 3573 dated 2012-06-30 at 14:03:55
smartmontools build host: x86_64-redhat-linux-gnu
smartmontools build configured: 2013-02-21 22:26:05 UTC
smartctl compile dated Feb 21 2013 at 22:26:16
smartmontools configure arguments: '--build=x86_64-redhat-linux-gnu'
'--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu'
'--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr'
'--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
'--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64'
'--libexecdir=/usr/libexec' '--localstatedir=/var'
'--sharedstatedir=/var/lib' '--mandir=/usr/share/man'
'--infodir=/usr/share/info' '--with-selinux' '--with-libcap-ng=yes'
'-with-systemdsystemunitdir=no' 'build_alias=x86_64-redhat-linux-gnu'
'host_alias=x86_64-redhat-linux-gnu'
'target_alias=x86_64-redhat-linux-gnu' 'CXXFLAGS=-O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -m64 -mtune=generic' 'CFLAGS=-O2 -g -pipe
-Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -m64 -mtune=generic'
'PKG_CONFIG_PATH=/usr/lib64/pkgconfig:/usr/share/pkgconfig'
[root@lizard ~]# smartctl --all -d sat /dev/sdc
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.12.0-v1] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD15NMVW-11AV3S2
Serial Number: WD-WX51A34L2076
LU WWN Device Id: 5 0014ee 25fa96bdb
Firmware Version: 01.01A01
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 (revision not indicated)
Local Time is: Thu Jul 10 11:11:33 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (30480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 337) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 12
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 1
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 12
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 10
193 Load_Cycle_Count 0x0032 200 200 000 Old_age
Always - 63
194 Temperature_Celsius 0x0022 115 114 000 Old_age
Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
write directly to me if you need I run some more command on it. thank you.
regards
Luigi
------------------------------------------------------------------------------