Re: Montoring disks on an LSI 9207 controller
Christian Franke <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
Roy Sigurd Karlsbakk wrote: >> Hi all >> >> I have a supermicro box with an LSI SAS 9207-4i4e controller and I'm >> trying to get good smart data from the drives, but… >> >> Drive connected to local SATA port: http://paste.debian.net/112936/ >> Drive connected to local LSI controller via SAS expander: >> http://paste.debian.net/112937/ >> >> Initially tested with Debian Wheezy's smartmontools 5.41, then >> compiled 6.3 - same results. Output above is from 6.3. >> >> Any idea how I can get good data from this thing? I've had supermicros >> earler (2+ years back) with LSI controllers and it worked back then. >> > Hm… Seems this is due the drives being SAS, not SATA. Any idea if it's possible to get the same info from a SAS drive as from a SATA drive? > No, see also: http://sourceforge.net/p/smartmontools/mailman/message/32482357/ ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support