Seagate STBV5000200 refuses (nearly) any smatrctl action
Markus Naeher <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
Hi, I have bought a external USB3 harddisk Seagate Expansion Desktop 5TB (STBV5000200) and I tried to self-test ist before using it. Without the -T permissive options, I got this error message: "A mandatory SMART command failed: exiting." Then, I tried a few parameter combinations (all with -T verypermissive), but all of them also failed (see attachment). I assume you need more data. Just tell me how I can provide it to you and I'll do. Thanks and Regards, Markus ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support
smartctl_STBV5000200.txt
(text/plain, 6.1 KB)
root@TuxServer:~# smartctl -d sat,auto -T verypermissive -i -H -c /dev/sdn
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.4-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdn [SCSI]: Device open changed type from 'sat,auto' to 'scsi'
=== START OF INFORMATION SECTION ===
Vendor: Seagate
Product: Expansion Desk
Revision: 0739
Compliance: SPC-4
User Capacity: 5.000.981.073.920 bytes [5,00 TB]
Logical block size: 4096 bytes
scsiModePageOffset: response length too short, resp_len=12 offset=12 bd_len=8
scsiModePageOffset: response length too short, resp_len=12 offset=12 bd_len=8
>> Terminate command early due to bad response to IEC mode page
=== START OF READ SMART DATA SECTION ===
root@TuxServer:~# smartctl -d sat,12 -T verypermissive -i -H -c /dev/sdn
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.4-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Thu Feb 5 14:13:09 2015 CET
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
Read SMART Data failed: scsi error unsupported field in scsi command
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error unsupported field in scsi command
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
root@TuxServer:~# smartctl -d sat,16 -T verypermissive -i -H -c /dev/sdn
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.4-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Thu Feb 5 14:13:13 2015 CET
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
Read SMART Data failed: scsi error unsupported field in scsi command
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error unsupported field in scsi command
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
root@TuxServer:~# smartctl -d sat,12 -T verypermissive -s on /dev/sdn
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.4-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enable failed: scsi error unsupported field in scsi command
root@TuxServer:~# smartctl -d sat,12 -T verypermissive -t long /dev/sdn
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.4-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.Read SMART Data failed: scsi error unsupported field in scsi command
root@TuxServer:~# smartctl -d sat,16 -T verypermissive -s on /dev/sdn
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.4-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enable failed: scsi error unsupported field in scsi command
root@TuxServer:~# smartctl -d sat,16 -T verypermissive -t long /dev/sdn
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.4-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.Read SMART Data failed: scsi error unsupported field in scsi command