Seagate Barracuda unsupported?
stefano franchi <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CAJODLwaN94gHXVxMsSGoo9TNM5Rs5AyO-k9zga7ueECECEexjQ@mail.gmail.com> |
I have four identical Seagate Barracuda 2TB HDD Sata drives (model# ST2000DM001) in a zfs pool on a linux server. Today, zfs refused to recognized one of the drives (drive is reported as UNAVAILABLE). When I try to check the drive's health with smartctl I get the following message: >sudo smartctl -H -d ata /dev/sdb smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.2-1-ARCH] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: Invalid argument A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. The same smartctl command on the other three drives runs with no issues (drives are accessed and health status is PASSED). My question is: Does smartctl's response indicate (1) that the drive is completely toast or (2) does it rather point toward a problem with the controller? (3) or perhaps it means sometjhing different altogether? Thanks for the help Stefano -- __________________________________________________ Stefano Franchi [email protected] <[email protected]> http://stefano.cleinias.org ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support