Corrupted Smart Report on Spun Down Areca Connected Drive
Brian P <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CAJh7hmjg6t6S47O2eosmwkBL+SOBXZXSzzJF1UYT2uLxg9KY=g@mail.gmail.com> |
I am having an issue that running a smart report on an Areca connected
drive is producing an errant Smart report. Running it a second time
produces correct results. Since I am using smartctl within a script, this
is causing me some problems. I expect this has to do with the drive being
spun down, but on other controllers the drive is simply spun up and results
are slightly delayed but accurate. This is the only controller I have seen
where the results are inaccurate when run on a sleeping drive. Although I
am working on a work-around, I wanted to report the issue as I saw no
reference to this while Googling.
This is happening on ARC-1200, ARC-1230 and ARC-1231ML controllers, which
are the only ones i have to test with. I expect other (all?) Areca
controllers are similarly affected.
If I can help in any way with this resolution (as I have these controllers
and can easily run tests), please let me know. I have over 30 years of IT
and programming experience. BTW, I am running this on Linux.
I want to thank you for the time invested into this excellent tool! It is
very invaluable to me and my colleagues!!
Brian
Here is an example:
*FIRST RUN (after long period of not being used)*
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-startuperic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K3000
Device Model: Hitachi HDS723030ALA640
Serial Number: MK0311YHG48W1A
LU WWN Device Id: 5 000cca 225c1f2ca
Firmware Version: MKAOA3B0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Apr 9 09:06:58 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
*Warning! SMART Attribute Data Structure error: invalid SMART
checksum.Warning! SMART Attribute Thresholds Structure error: invalid SMART
checksum.*
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not
supported.
SMART capabilities: (0x0000) Automatic saving of SMART
data is not implemented.
Error logging capability: (0x00) Error logging supported.
General Purpose Logging supported.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
*SMART Attributes Data Structure revision number: 1114Vendor Specific SMART
Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST
THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE255 Unknown_Attribute
0x373f 200 016 063 Pre-fail Always In_the_past
69269232549888 75 Unknown_Attribute 0x334d 048 049 077
Pre-fail Offline FAILING_NOW 95963332560945 65 Unknown_Attribute
0x0331 000 255 049 Pre-fail Offline FAILING_NOW
87193389381887 51 Unknown_Attribute 0x3041 066 105 065
Pre-fail Offline - 35611326308680 68 Unknown_Attribute
0x3748 083 051 072 Old_age Offline In_the_past
71675507913522 52 Unknown_Attribute 0x2036 048 032 054
Old_age Always FAILING_NOW 35322350018592 32 Unknown_Attribute
0x2020 032 032 032 Old_age Offline FAILING_NOW 550026354720 16
Unknown_Attribute 0x3f00 000 016 000 Old_age Offline
- 280379760114684255 Unknown_Attribute 0x000f 000 007
015 Pre-fail Always FAILING_NOW 131943408599808120
Unknown_Attribute 0x7800 000 000 000 Old_age Offline
- 0 64 Unknown_Attribute 0xfc00 001 041 000 Old_age
Offline - 126982477343488105 Unknown_Attribute 0x4174
188 099 116 Old_age Offline In_the_past 5876252487254
Free_Fall_Sensor 0xfe00 255 000 000 Old_age Offline
- 222101483028480249 Unknown_Attribute 0x1000 039 000
000 Old_age Offline - 1500296491008162
Unknown_Attribute 0xc1cc 037 202 204 Old_age Offline
FAILING_NOW 242241 Total_LBAs_Written 0x200d 250 001 013
Pre-fail Offline In_the_past 52793809305600 17 Unknown_Attribute
0x0900 000 017 000 Old_age Offline - 5502138516992189
High_Fly_Writes 0xff5d 255 000 093 Pre-fail Offline
In_the_past 128Warning! SMART ATA Error Log Structure error: invalid SMART
checksum.SMART Error Log Version: 0No Errors LoggedWarning! SMART Self-Test
Log Structure error: invalid SMART checksum.SMART Self-test log structure
revision number 0Warning: ATA Specification requires self-test log
structure revision number = 1Num Test_Description
Status Remaining LifeTime(hours) LBA_of_first_error# 1
Vendor (0x4f) Unknown status (0xc) 20% 51221 -#
2 Offline Completed without error 00% 0
-# 3 Reserved (0x20) Aborted by host 120%
0 -# 4 Offline Completed without error
00% 61 -# 5 Vendor (0xbd) Completed: electrical
failure 130% 65535 128# 6 Reserved (0x11) Completed
without error 00% 9 -# 7 Vendor (0xf1)
Completed without error 130% 64032 -# 8
Offline Completed without error 00% 0 -#
9 Vendor (0xa2) Unknown status (0xc) 120% 9665
-#10 Vendor (0xf9) Completed without error 00%
10000 -#11 Vendor (0x69) Completed: read failure
40% 48193 1581285191#12 Offline Completed without
error 00% 0 -#13 Vendor (0xff) Completed
without error 150% 0 -#14 Offline
Interrupted (host reset) 150% 16384 -#15 Reserved
(0x34) Fatal or unknown error 60% 12320
538976288#16 Reserved (0x33) Completed: unknown failure 10%
16944 1752457544#17 Vendor (0x4b) Completed: unknown
failure 130% 12339 878266417*
Selective Self-tests/Logging not supported
*SECOND RUN (immediately after)*
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-startuperic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K3000
Device Model: Hitachi HDS723030ALA640
Serial Number: MK0311YHG48W1A
LU WWN Device Id: 5 000cca 225c1f2ca
Firmware Version: MKAOA3B0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Apr 9 09:08:00 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: (31406) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 524) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail
Always - 0
2 Throughput_Performance 0x0005 132 132 054 Pre-fail
Offline - 94
3 Spin_Up_Time 0x0007 127 127 024 Pre-fail
Always - 610 (Average 609)
4 Start_Stop_Count 0x0012 100 100 000 Old_age
Always - 2172
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0005 133 133 020 Pre-fail
Offline - 27
9 Power_On_Hours 0x0012 096 096 000 Old_age
Always - 32566
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 158
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age
Always - 2393
193 Load_Cycle_Count 0x0012 099 099 000 Old_age
Always - 2393
194 Temperature_Celsius 0x0002 253 253 000 Old_age
Always - 20 (Min/Max 14/36)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support