Re: not able to see SMART attributes

Ketan Patel <[email protected]>
Newsgroups gmane.linux.utilities.smartmontools
Message-ID <BA9F10BCCC6E144A8E5A64990D38C6CC4B742D36@SACMBXIP01.sdcorp.global.sandisk.com> 
Hello Christian,



I have reinstalled the package and enabled 64bit version installation. I am not able to see proper data even with 64bit version.



>> Is the driver RAID-capable? If yes, this problem is not unusual.

I am not sure if the drive RAID-capable. Please suggest how to check that.



>> Please try whether "smartctl -d ata ..." provides better results.

Please see the response below.

[cid:[email protected]]





After that, I have used the “smartctl –a …” and the relevant output attached herewith. It is still not showing proper data.



I have also tried “smartctl –r ioctl,2 –a …” and attach the output.



Thanks,

Ketan





-----Original Message-----
From: Christian Franke [mailto:[email protected]]
Sent: Monday, August 10, 2015 10:37 PM
To: Ketan Patel
Cc: [email protected]
Subject: Re: [smartmontools-support] not able to see SMART attributes



Hello Ketan,



Ketan Patel wrote:

>> Does the 64-bit version of smartctl return similar results?

> I couldn't find the 64-bit version. Please provide the link for the reference.



There is no extra package. The one and only Windows package contains both versions. Simply select '64-bit version' in installer GUI. You could also unpack individual files from the installer by opening the exe file in 7-Zip GUI.



http://www.smartmontools.org/wiki/Download#InstalltheWindowspackage





>   Just for your FYI, there is another drive on this and smartctl is able to read smart attributes properly there.



Is the driver RAID-capable? If yes, this problem is not unusual.





>

>>> For further diagnostics, please provide output of "smartctl -r ioctl,2 -a ..." as an attachment.

> I hereby attach the file for your reference.



I see, this driver indicates SAT (SCSI/ATA-Translation) support:

   Vendor:   "ATA     "



If this is the case, smartctl issues SAT ATA-PASSTHROUGH SCSI commands via SCSI pass-through instead of ATA commands via ATA pass-through I/O-controls.



Please try whether "smartctl -d ata ..." provides better results.



>

> Besides this, I can see that command sequence is not appropriate for this particular drive.

> ------ Input:   FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN

> ------ [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2

> 00 b0 00 ]



Of course, because this is the SAT ATA-PASSTHROUGH(16) command. The driver is supposed to translate it to the corresponding ATA command.



> Do you have flexibility to provide custom command inputs for smart attribute? That way I can just use the custom commands and I would able to get the proper values.



No, smartctl cannot issue custom commands (exception: -t vendor,0x..).

Does this device support vendor specific commands not covered by T13?



Thanks,

Christian



________________________________

PLEASE NOTE: The information contained in this electronic mail message is intended only for the use of the designated recipient(s) named above. If the reader of this message is not the intended recipient, you are hereby notified that you have received this message in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender by telephone or e-mail (as shown above) immediately and destroy any and all copies of this message in your possession (whether hard copies or electronically stored copies).

------------------------------------------------------------------------------

_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
image001.png (image/png, 32.6 KB) - not displayed
smartctl-r_ioctl2-a_output_post_smartctl-d_ata.txt (text/plain, 23.2 KB) 
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-2008r2] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

 \\.\PhysicalDrive1: successfully opened
  IOCTL_STORAGE_QUERY_PROPERTY returns:
    Vendor:   "ATA     "
    Product:  "SDLF1DAR-480G-1H"
    Revision: "RP41"
    Removable: No
    BusType:   0x0a

REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE
 Input:   FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     08 5a ff 3f 37 c8 10 00  00 00 00 00 3f 00 00 00                        
 10     00 00 00 00 20 20 20 20  20 20 20 20 20 20 20 20                        
 20     30 32 31 30 33 41 33 39  00 00 00 40 32 00 33 5a                        
 30     43 30 50 52 31 34 44 53  46 4c 44 31 52 41 34 2d                        
 40     30 38 2d 47 48 31 31 41  20 20 20 20 20 20 20 20                        
 50     20 20 20 20 20 20 20 20  20 20 20 20 20 20 10 80                        
 60     00 00 00 2f 00 40 00 00  00 00 06 00 ff 3f 10 00                        
 70     3f 00 10 fc fb 00 00 f5  ff ff ff 0f 00 00 07 00                        
 80     03 00 78 00 78 00 78 00  78 00 30 4d 00 00 00 00                        
 90     00 00 00 00 00 00 1f 00  0e 95 66 00 c4 00 44 00                        
 a0     fe 01 39 00 6b 74 01 74  63 41 69 70 01 b4 63 41                        
 b0     7f 40 01 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 c0     00 00 00 00 00 00 00 00  b0 36 e4 37 00 00 00 00                        
 d0     00 00 01 00 03 60 00 00  01 50 31 17 76 00 68 31                        
 e0     00 00 00 00 00 00 00 00  00 00 00 01 00 00 5c 40                        
 f0     1c 40 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 [Duration: 0.013s]
REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE returned 0

===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 08 5a ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |.Z.?7.......?...|
016-031: 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 |....            |
032-047: 30 32 31 30 33 41 33 39 00 00 00 40 32 00 33 5a |[email protected]|
048-063: 43 30 50 52 31 34 44 53 46 4c 44 31 52 41 34 2d |C0PR14DSFLD1RA4-|
064-079: 30 38 2d 47 48 31 31 41 20 20 20 20 20 20 20 20 |08-GH11A        |
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 |              ..|
096-111: 00 00 00 2f 00 40 00 00 00 00 06 00 ff 3f 10 00 |.../.@.......?..|
112-127: 3f 00 10 fc fb 00 00 f5 ff ff ff 0f 00 00 07 00 |?...............|
128-143: 03 00 78 00 78 00 78 00 78 00 30 4d 00 00 00 00 |..x.x.x.x.0M....|
144-159: 00 00 00 00 00 00 1f 00 0e 95 66 00 c4 00 44 00 |..........f...D.|
160-175: fe 01 39 00 6b 74 01 74 63 41 69 70 01 b4 63 41 |..9.kt.tcAip..cA|
176-191: 7f 40 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............|
192-207: 00 00 00 00 00 00 00 00 b0 36 e4 37 00 00 00 00 |.........6.7....|
208-223: 00 00 01 00 03 60 00 00 01 50 31 17 76 00 68 31 |.....`...P1.v.h1|
224-239: 00 00 00 00 00 00 00 00 00 00 00 01 00 00 5c 40 |..............\@|
240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............|
256-271: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00 |............=...|
416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............|
432-447: 00 00 01 00 00 00 00 00 00 00 00 00 01 10 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 ce |................|
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====

=== START OF INFORMATION SECTION ===
Device Model:     SDLF1DAR-480G-1HA1
Serial Number:    2001A393
LU WWN Device Id: 5 001173 100763168
Firmware Version: Z30CRP41
User Capacity:    480,103,981,056 bytes [480 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4c
SATA Version is:  ATA8-AST, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Aug 11 11:28:35 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


REPORT-IOCTL: Device=/dev/sdb Command=SMART READ ATTRIBUTE VALUES
 Input:   FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
 [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
  >>> Sense buffer, len=19:
 00     70 00 05 00 00 00 00 0b  00 00 00 00 24 00 00 c8                        
 10     00 00 00                                                                
  status=2: sense_key=5 asc=24 ascq=0
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 10     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 20     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 30     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 40     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 50     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 60     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 70     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 80     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 90     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 a0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 b0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 c0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 d0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 f0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
sat_device::ata_pass_through: scsi error: unsupported field in scsi command
 [Duration: 0.006s]
REPORT-IOCTL: Device=/dev/sdb Command=SMART READ ATTRIBUTE VALUES returned -1 errno=5 [scsi error unsupported field in scsi command]

===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====

Read SMART Data failed: scsi error unsupported field in scsi command

=== START OF READ SMART DATA SECTION ===

REPORT-IOCTL: Device=/dev/sdb Command=SMART STATUS CHECK
 Input:   FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
 [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
 [Duration: 0.004s]
REPORT-IOCTL: Device=/dev/sdb Command=SMART STATUS CHECK returned -1 errno=40 [Incomplete response, ATA output registers missing]
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.


REPORT-IOCTL: Device=/dev/sdb Command=SMART READ LOG InputParameter=0
 Input:   FR=0xd5, SC=0x01, LL=0x00, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
 [ata pass-through(16): 85 08 0e 00 d5 00 01 00 00 00 4f 00 c2 00 b0 00 ]
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     01 00 01 00 01 00 00 00  01 00 00 00 01 00 00 00                        
 10     00 00 01 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 20     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 30     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 40     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 50     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 60     08 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 70     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 80     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 90     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 a0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 b0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 c0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 d0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 f0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 [Duration: 0.012s]
REPORT-IOCTL: Device=/dev/sdb Command=SMART READ LOG returned 0 errno=40 [Incomplete response, ATA output registers missing]

===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 01 00 01 00 00 00 01 00 00 00 01 00 00 00 |................|
016-031: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 02 00 02 00 02 00 02 00 02 00 02 00 02 00 02 00 |................|
272-287: 02 00 02 00 02 00 02 00 02 00 02 00 02 00 02 00 |................|
288-303: 02 00 02 00 02 00 02 00 02 00 02 00 02 00 02 00 |................|
304-319: 02 00 02 00 02 00 02 00 02 00 02 00 02 00 02 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
===== [SMART READ LOG] DATA END (512 Bytes) =====


REPORT-IOCTL: Device=/dev/sdb Command=SMART READ LOG InputParameter=1
 Input:   FR=0xd5, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
 [ata pass-through(16): 85 08 0e 00 d5 00 01 00 01 00 4f 00 c2 00 b0 00 ]
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     01 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 10     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 20     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 30     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 40     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 50     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 60     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 70     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 80     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 90     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 a0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 b0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 c0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 d0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 f0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 [Duration: 0.017s]
REPORT-IOCTL: Device=/dev/sdb Command=SMART READ LOG returned 0 errno=40 [Incomplete response, ATA output registers missing]

===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff |................|
===== [SMART READ LOG] DATA END (512 Bytes) =====

SMART Error Log Version: 1
No Errors Logged


REPORT-IOCTL: Device=/dev/sdb Command=SMART READ LOG InputParameter=6
 Input:   FR=0xd5, SC=0x01, LL=0x06, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
 [ata pass-through(16): 85 08 0e 00 d5 00 01 00 06 00 4f 00 c2 00 b0 00 ]
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     01 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 10     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 20     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 30     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 40     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 50     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 60     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 70     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 80     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 90     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 a0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 b0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 c0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 d0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 f0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 [Duration: 0.008s]
REPORT-IOCTL: Device=/dev/sdb Command=SMART READ LOG returned 0 errno=40 [Incomplete response, ATA output registers missing]

===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff |................|
===== [SMART READ LOG] DATA END (512 Bytes) =====

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported
smartctl-a_output_post_smartctl-d_ata.txt (text/plain, 1.3 KB) 
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-2008r2] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SDLF1DAR-480G-1HA1
Serial Number:    2001A393
LU WWN Device Id: 5 001173 100763168
Firmware Version: Z30CRP41
User Capacity:    480,103,981,056 bytes [480 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4c
SATA Version is:  ATA8-AST, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Aug 11 11:26:55 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Read SMART Data failed: scsi error unsupported field in scsi command

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.