Re: smart monitoring tools for PMC -Sierra RAID controllers

Hi  Christan,

Any update on this issue  ?  I need to make smartd  work here .

Regards,
Shaiju.


Sadasivan Shaiju
TECHNICAL LEADER.ENGINEERING
[email protected]
Phone: +1 408 853 8117
Cisco Systems Limited
3850 Zanker Road
San jose 
CALIFORNIA
95134
US
Cisco.com





Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html



-----Original Message-----
From: Sadasivan Shaiju (shshaiju) 
Sent: Wednesday, August 26, 2015 4:11 PM
To: Christian Franke
Cc: [email protected]
Subject: Re: [smartmontools-support] smart monitoring tools for PMC -Sierra RAID controllers

Hi  Christan

Resending  the  information  with smartcl  output  as  attached .  Appreciate  your help .

Platform?
 X86

Controller?

03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02)



SAS oder SATA disks?

SAS
:   0:9      54 JBOD  -    1.635 TB SAS  HDD N   N  4 KB HUC101818CS4200


smartctl command line?

/usr/local/sbin/smartctl      -t  short  -d  megaraid,54    /dev/sdf    ( run the short test)

 /usr/local/sbin/smartctl       -d megaraid, 54       /dev/sdf   -a      ( the result)


smartctl output (as plain/text attachment)?

Attached .

smartd.conf configuration line?

DEVICESCAN  -a

Smartd   command  used.

/usr/local/sbin/smartd   -q  onecheck   


Smartd  output 

Device: /dev/bus/5 [megaraid_disk_54], opened SCSI device
Device: /dev/bus/5 [megaraid_disk_54], non-SMART asc,ascq: 94,1


Regards,
Shaiju.

Sadasivan Shaiju
TECHNICAL LEADER.ENGINEERING
[email protected]
Phone: +1 408 853 0814
Cisco Systems Limited
510 McCarthy Blvd.
MILPITAS
CALIFORNIA
95035
US
Cisco.com





Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html



-----Original Message-----
From: Christian Franke [mailto:[email protected]] 
Sent: Tuesday, August 25, 2015 10:34 PM
To: Sadasivan Shaiju (shshaiju)
Cc: [email protected]
Subject: Re: [smartmontools-support] smart monitoring tools for PMC -Sierra RAID controllers

Sadasivan Shaiju (shshaiju) wrote:
> However  the  test  passed  with  smartctl  utility  . So  this looks  to be an  issue  with  smartd .

Please be more specific:
Platform?
Controller?
SAS oder SATA disks?
smartctl command line?
smartctl output (as plain/text attachment)?
smartd.conf configuration line?

Thanks,
Christian


------------------------------------------------------------------------------