Re: smartmonitoring tools support for LSI Embedded MegaRAID(SW RAID)

Hi ,

Please see inline .


Regards,
Shaiju.

Sadasivan Shaiju
TECHNICAL LEADER.ENGINEERING
[email protected]
Phone: +1 408 853 8117
Cisco Systems Limited
3850 Zanker Road
San jose 
CALIFORNIA
95134
US
Cisco.com





Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html



-----Original Message-----
From: [email protected] [mailto:[email protected]] 
Sent: Tuesday, September 08, 2015 5:08 PM
To: Sadasivan Shaiju (shshaiju)
Cc: [email protected]
Subject: Re: [smartmontools-support] smartmonitoring tools support for LSI Embedded MegaRAID(SW RAID)

First try "/usr/local/sbin/smartctl --scan" and see what that reports. If that fails, give the report from "smartctl -r ioctl,2 -d csmi --scan"

[root@localhost bin]# /usr/local/sbin/smartctl --scan      
             
/dev/sde -d scsi # /dev/sde, SCSI device
/dev/sdf -d scsi # /dev/sdf, SCSI device
[root@localhost bin]# /usr/local/sbin/smartctl -a -d scsi /dev/sdf

smartctl 6.4 2015-06-04 r4109 [x86_64-linux-2.6.32-431.cisco.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               LSI
Product:              MegaSR
Revision:             1.0
User Capacity:        298,999,349,248 bytes [298 GB]
Logical block size:   512 bytes
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.


[root@localhost bin]# /usr/local/sbin/smartctl -r ioctl,2 -d csmi --scan
[root@localhost bin]#

> Hi ,
>
> Does smart monitoring tools support  LSI Embedded MegaRAID  .  I  
> tried with version 6.4 .  But it doesn't seem to work .
>
> [root@localhost bin]# /usr/local/sbin/smartctl -a -d megaraid,0  
> /dev/sde
>
> smartctl 6.4 2015-06-04 r4109 [x86_64-linux-2.6.32-431.cisco.x86_64]
> (local build)
> Copyright (C) 2002-15, Bruce Allen, Christian Franke, 
> www.smartmontools.org
>
>
> Any help will be appreciated .
>
> Regards,
> Shaiju.
>
> Sadasivan Shaiju
> TECHNICAL LEADER.ENGINEERING
> [email protected]
> Phone: +1 408 853 8117
> Cisco Systems Limited
> 3850 Zanker Road
> San jose
> CALIFORNIA
> 95134
> US
> Cisco.com
>
>
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the 
> sole use of the intended recipient. Any review, use, distribution or 
> disclosure by others is strictly prohibited. If you are not the 
> intended recipient (or authorized to receive for the recipient), 
> please contact the sender by reply email and delete all copies of this message.
> For corporate legal information go to:
> http://www.cisco.com/web/about/doing_business/legal/cri/index.html
>
>
>
> ----------------------------------------------------------------------
> -------- _______________________________________________
> Smartmontools-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>



------------------------------------------------------------------------------
Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
Get real-time metrics from all of your servers, apps and tools
in one place.
SourceForge users - Click here to start your Free Trial of Datadog now!
http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140