Re: Areca ARC-1882ix-24

I tried this already, without the device there it would just complain.
$ smartctl -a -d areca,1 /dev/sdg
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.5-1-ARCH] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

Unable to open /proc/scsi/sg/device_hdr for reading
do_scsi_cmnd_io with write buffer failed code = ffffffff
Unable to open /proc/scsi/sg/device_hdr for reading
do_scsi_cmnd_io with write buffer failed code = ffffffff
Unable to open /proc/scsi/sg/device_hdr for reading
do_scsi_cmnd_io with write buffer failed code = ffffffff
Smartctl open device: /dev/sdg [areca_disk#01_enc#01] failed: Input/output
error

On Sat, Dec 19, 2015 at 8:55 AM, Christian Franke <
[email protected]> wrote:

> Mr. Gecko wrote:
>
>> I read that smartmontools supports Areca RAID Cards, however I am running
>> in JBOD and when I run smartctl on the drive, it doesn't return all the
>> information as it should. This makes me wonder if the smartmontools health
>> monitor is accurate.
>>
>> Output from smartmontools:
>> sudo smartctl -a /dev/sdg
>>
>
> Add option '-d areca,N' where N denotes the physical disk number (1=first
> disk).
> See smartctl man page for further info.
>
> Regards,
> Christian
>
>

------------------------------------------------------------------------------

_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support