Re: No value for THRESH column
Diego Queiroz <[email protected]> Mon, 29 Feb 2016 11:53:10 -0300
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CAK8EMa4TbnRCwyQNbHWLSP_nUjSbuxwrrj2DuSb7H3RFLZFP3A@mail.gmail.com> |
Thanks for your answer Christian. Here is the file. Best regards, --- Diego Queiroz On Mon, Feb 29, 2016 at 3:08 AM, Christian Franke < [email protected]> wrote: > Diego Queiroz wrote: > >> In my hard drive, I got no value for the THRESH column to all attributes >> (it display three dashes "---" in the place of the corresponding value). >> >> What does this mean? I found in nowhere anything like this. >> >> > This means that the SMART READ THRESHOLDS command failed for some reason. > > For further diagnostics, please provide the full smartctl output as an > attachment. Include smartctl version info (first output line) and drive > identity (-i). The device serial number could be suppressed (-q noserial). > > Thanks, > Christian > > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support
smartctl-result.txt
(text/plain, 5.6 KB)
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.1-RELEASE-p25 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation ES.3
Device Model: ST1000NM0033-9ZM173
Serial Number: Z1W3VPDZ
LU WWN Device Id: 5 000c50 07b13695b
Add. Product Id: DELL(tm)
Firmware Version: GA0D
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Feb 29 11:47:47 2016 BRT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 90) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x010f 068 063 --- Pre-fail Always - 7296494
3 Spin_Up_Time 0x0103 097 096 --- Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 --- Old_age Always - 25
5 Reallocated_Sector_Ct 0x0133 100 100 --- Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 --- Pre-fail Always - 65494541
9 Power_On_Hours 0x0032 094 094 --- Old_age Always - 5361
10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 24
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 --- Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 058 --- Old_age Always - 37 (Min/Max 33/42)
191 G-Sense_Error_Rate 0x0032 100 100 --- Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 12
193 Load_Cycle_Count 0x0032 100 100 --- Old_age Always - 243
194 Temperature_Celsius 0x0022 037 042 --- Old_age Always - 37 (0 18 0 0 0)
195 Hardware_ECC_Recovered 0x001a 040 019 --- Old_age Always - 7296494
196 Reallocated_Event_Count 0x0032 000 000 --- Old_age Always - 36864
197 Current_Pending_Sector 0x0012 100 100 --- Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 --- Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 --- Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 --- Old_age Offline - 5363 (138 124 0)
241 Total_LBAs_Written 0x0000 100 253 --- Old_age Offline - 8390231826
242 Total_LBAs_Read 0x0000 100 253 --- Old_age Offline - 27754974
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5221 -
# 2 Short offline Completed without error 00% 2 -
# 3 Extended offline Completed without error 00% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.