smart attributes ST8000NM0075
Wybren Buijs <[email protected]> Mon, 19 Sep 2016 14:21:45 +0200
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
We have these new seagate disks but the smartctl -a does not provide the
regular attributes.
How does this affect the workings of the smartmon demon?
It looks like its only going to warn us when a self test or temperature
fails
See the output of smartctl -a below.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: ST8000NM0075
Revision: E002
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000c50085729b37
Serial number: ZA122VH10000R643Y5QL
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Mon Sep 19 14:20:22 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 31 C
Drive Trip Temperature: 60 C
Manufactured in week 21 of year 2016
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 55
Specified load-unload count over device lifetime: 300000
Accumulated load-unload cycles: 93
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 1138342184
Blocks received from initiator = 601572160
Blocks read from cache and sent to initiator = 1440272706
Number of read and write commands whose size <= segment size = 6540158
Number of read and write commands whose size > segment size = 3231
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 934.43
number of minutes until next internal SMART test = 38
Error counter log:
Errors Corrected by Total Correction
Gigabytes Total
ECC rereads/ errors algorithm
processed uncorrected
fast | delayed rewrites corrected invocations [10^9
bytes] errors
read: 1357302867 0 0 1357302867 0
11577.947 0
write: 0 0 0 0 0 308.532
0
Non-medium error count: 20
SMART Self-test log
Num Test Status segment LifeTime
LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 922
- [- - -]
# 2 Background short Completed - 898
- [- - -]
# 3 Background short Completed - 874
- [- - -]
# 4 Background short Completed - 850
- [- - -]
# 5 Background short Completed - 826
- [- - -]
# 6 Background short Completed - 802
- [- - -]
# 7 Background short Completed - 778
- [- - -]
# 8 Background short Completed - 754
- [- - -]
# 9 Background short Completed - 730
- [- - -]
#10 Background short Completed - 706
- [- - -]
#11 Background short Completed - 682
- [- - -]
#12 Background short Completed - 658
- [- - -]
#13 Background short Completed - 634
- [- - -]
#14 Background short Completed - 610
- [- - -]
#15 Background short Completed - 586
- [- - -]
#16 Background short Completed - 562
- [- - -]
#17 Background short Completed - 538
- [- - -]
#18 Background short Completed - 514
- [- - -]
#19 Background short Completed - 490
- [- - -]
#20 Background short Completed - 466
- [- - -]
Long (extended) Self Test duration: 47220 seconds [787.0 minutes]
------------------------------------------------------------------------------