Re: SAS preventive disk replacement

Gandalf Corvotempesta <[email protected]> Sun, 27 Nov 2016 10:36:54 +0100
Newsgroups gmane.linux.utilities.smartmontools
Message-ID <CAJH6TXg1OiY8J7d0r1WJ_=f49Bk77xDYeF+2CQ974fmxq92ZUg@mail.gmail.com>
2016-11-26 22:44 GMT+01:00 L.A. Walsh <[email protected]>:
>    Do SAS disks have the same or similar fields for 'smartmon'
> as ATA/SATA disks?  FWIW -- nobody may have responded because,
> like me, no one really knew an authoritative answer.  That said,
> I'll just spout off "unauthoritatively"... (YMMV)...

No, totally different output:

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.0+2] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

Vendor:               SEAGATE
Product:              ST300MP0005
Revision:             VT31
User Capacity:        300,000,000,000 bytes [300 GB]
Logical block size:   512 bytes
Logical Unit id:      0x5000c500962d6707
Serial number:        S7K0XLW9
Device type:          disk
Transport protocol:   SAS
Local Time is:        Sun Nov 27 10:34:14 2016 CET
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        60 C
Manufactured in week 03 of year 2016
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  13
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  242
Elements in grown defect list: 0
Vendor (Seagate) cache information
  Blocks sent to initiator = 2780454742
  Blocks received from initiator = 93770794
  Blocks read from cache and sent to initiator = 1077886413
  Number of read and write commands whose size <= segment size = 386420548
  Number of read and write commands whose size > segment size = 0
Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 5519,43
  number of minutes until next internal SMART test = 20

Error counter log:
           Errors Corrected by           Total   Correction
Gigabytes    Total
               ECC          rereads/    errors   algorithm
processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9
bytes]  errors
read:   2030615210        1         0  2030615211          1
266092,169           0
write:         0        0         0         0          0
11228,247           0
verify: 4273860022        0         0  4273860022          0
10059,776           0

Non-medium error count:        3



>    Good luck in finding your answers.  Did you google?  ;-)

Googled a lot, without success.

------------------------------------------------------------------------------