How do I enable smartctl on 3ware controller - drive?
[email protected] Tue, 21 Feb 2017 14:22:13 -0800
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CAFY+Po-=PTA=i-yZsJ_v2nFxvk5=3BOMw0fm1nG1=t6gfEZxCQ@mail.gmail.com> |
--===============2739814619977891945== Content-Type: multipart/alternative; boundary=001a1148481eddcace054911cfd3 --001a1148481eddcace054911cfd3 Content-Type: text/plain; charset=UTF-8 Hi, I'm trying to figure out the syntax to enable smartctl on drives behind a 3ware raid controller. I've tried many combinations from the man pages but none seem to work. Here is the hardware and what I have tried. Thanks! Vendor: LSI Product: 9750-8i OS: Centos 6.8 *# tw_cli /c14 show* p11 OK u1 838.36 GB SAS - /c14/e0/slt3 SEAGATE ST900MM0026 p12 OK u1 838.36 GB SAS - /c14/e0/slt4 SEAGATE ST900MM0026 p13 OK u1 838.36 GB SAS - /c14/e0/slt5 SEAGATE ST900MM0026 p14 OK u1 838.36 GB SAS - /c14/e0/slt6 SEAGATE ST900MM0026 p15 OK u1 838.36 GB SAS - /c14/e0/slt7 SEAGATE ST900MM0026 ... *# smartctl -s on -d 3ware,11 /dev/twl0* smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.6.1.el6.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Smartctl: Device Read Identity Failed: Input/output error A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. *# smartctl -s on /dev/sda* smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.6.1.el6.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Informational Exceptions (SMART) disabled Temperature warning disabled *# smartctl -s on -d scsi /dev/sda* Vendor: LSI Product: 9750-8i DISK Revision: 5.12 User Capacity: 9,899,874,451,456 bytes [9.89 TB] Logical block size: 512 bytes Logical Unit id: 0x600050e060954100e80a0000d2c30000 Serial number: K5105KSK60954100E80A Device type: disk Local Time is: Tue Feb 21 13:37:55 2017 PST Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported *# --- Get information ----* *# smartctl -a -i /dev/sda* smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.6.1.el6.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor: LSI Product: 9750-8i DISK Revision: 5.12 User Capacity: 294,988,546,048 bytes [294 GB] Logical block size: 512 bytes Logical Unit id: 0x600050e089a0df00514d00000df40000 Serial number: B125M1BQ89A0DF00514D Device type: disk Local Time is: Tue Feb 21 14:16:44 2017 PST Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging --001a1148481eddcace054911cfd3 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <div dir=3D"ltr">Hi, I'm trying to figure out the syntax to enable smar= tctl on drives behind a 3ware raid controller.=C2=A0 I've tried many co= mbinations from the man pages but none seem to work.=C2=A0 Here is the hard= ware and what I have tried.=C2=A0 Thanks!<div><br></div><div><div>Vendor: = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 LSI</div><div>Product: =C2= =A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A09750-8i=C2=A0</div><div>OS: Ce= ntos 6.8</div><div><br></div><div><b># tw_cli /c14 show</b><br></div><div><= div>p11 =C2=A0 OK =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 u1 =C2=A0 838.3= 6 GB SAS =C2=A0 - =C2=A0 /c14/e0/slt3 SEAGATE ST900MM0026</div><div>p12 =C2= =A0 OK =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 u1 =C2=A0 838.36 GB SAS = =C2=A0 - =C2=A0 /c14/e0/slt4 SEAGATE ST900MM0026</div><div>p13 =C2=A0 OK = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 u1 =C2=A0 838.36 GB SAS =C2=A0 - = =C2=A0 /c14/e0/slt5 SEAGATE ST900MM0026</div><div>p14 =C2=A0 OK =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 u1 =C2=A0 838.36 GB SAS =C2=A0 - =C2=A0 /c1= 4/e0/slt6 SEAGATE ST900MM0026</div><div>p15 =C2=A0 OK =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 u1 =C2=A0 838.36 GB SAS =C2=A0 - =C2=A0 /c14/e0/slt7 S= EAGATE ST900MM0026</div></div><div>...</div><div><br></div><div><div><b># s= martctl -s on -d 3ware,11 /dev/twl0</b></div><div>smartctl 5.43 2012-06-30 = r3573 [x86_64-linux-2.6.32-642.6.1.el6.x86_64] (local build)</div><div>Copy= right (C) 2002-12 by Bruce Allen, <a href=3D"http://smartmontools.sourcefor= ge.net">http://smartmontools.sourceforge.net</a></div><div><br></div><div>S= martctl: Device Read Identity Failed: Input/output error</div><div><br></di= v><div>A mandatory SMART command failed: exiting. To continue, add one or m= ore '-T permissive' options.</div></div><div><br></div><div><div><b= ># smartctl -s on =C2=A0/dev/sda</b></div><div>smartctl 5.43 2012-06-30 r35= 73 [x86_64-linux-2.6.32-642.6.1.el6.x86_64] (local build)</div><div>Copyrig= ht (C) 2002-12 by Bruce Allen, <a href=3D"http://smartmontools.sourceforge.= net">http://smartmontools.sourceforge.net</a></div><div><br></div><div>Info= rmational Exceptions (SMART) disabled</div><div>Temperature warning disable= d</div></div><div><br></div><div><div><b># smartctl -s on -d scsi =C2=A0/de= v/sda</b></div><div><br></div><div>Vendor: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 LSI</div><div>Product: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= =C2=A0 =C2=A09750-8i =C2=A0 =C2=A0DISK</div><div>Revision: =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 5.12</div><div>User Capacity: =C2=A0 =C2=A0 =C2= =A0 =C2=A09,899,874,451,456 bytes [9.89 TB]</div><div>Logical block size: = =C2=A0 512 bytes</div><div>Logical Unit id: =C2=A0 =C2=A0 =C2=A00x600050e06= 0954100e80a0000d2c30000</div><div>Serial number: =C2=A0 =C2=A0 =C2=A0 =C2= =A0K5105KSK60954100E80A</div><div>Device type: =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0disk</div><div>Local Time is: =C2=A0 =C2=A0 =C2=A0 =C2=A0Tue Feb 21 1= 3:37:55 2017 PST</div><div>Device supports SMART and is Disabled</div><div>= Temperature Warning Disabled or Not Supported</div></div><div><br></div><di= v><b># --- Get information ----</b></div><div><div><b># smartctl -a -i /dev= /sda</b></div><div>smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.= 6.1.el6.x86_64] (local build)</div><div>Copyright (C) 2002-12 by Bruce Alle= n, <a href=3D"http://smartmontools.sourceforge.net">http://smartmontools.so= urceforge.net</a></div><div><br></div><div>Vendor: =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 LSI</div><div>Product: =C2=A0 =C2=A0 =C2=A0 =C2=A0= =C2=A0 =C2=A0 =C2=A09750-8i =C2=A0 =C2=A0DISK</div><div>Revision: =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 5.12</div><div>User Capacity: =C2=A0 =C2= =A0 =C2=A0 =C2=A0294,988,546,048 bytes [294 GB]</div><div>Logical block siz= e: =C2=A0 512 bytes</div><div>Logical Unit id: =C2=A0 =C2=A0 =C2=A00x600050= e089a0df00514d00000df40000</div><div>Serial number: =C2=A0 =C2=A0 =C2=A0 = =C2=A0B125M1BQ89A0DF00514D</div><div>Device type: =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0disk</div><div>Local Time is: =C2=A0 =C2=A0 =C2=A0 =C2=A0Tue Feb = 21 14:16:44 2017 PST</div><div>Device supports SMART and is Disabled</div><= div>Temperature Warning Disabled or Not Supported</div><div>SMART Health St= atus: OK</div><div><br></div><div>Error Counter logging not supported</div>= <div>Device does not support Self Test logging</div></div><div><br></div><d= iv><br></div></div></div> --001a1148481eddcace054911cfd3-- --===============2739814619977891945== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot --===============2739814619977891945== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support --===============2739814619977891945==--