SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200
Gandalf Corvotempesta <[email protected]> Sun, 19 Mar 2017 12:56:34 +0100
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CAJH6TXgk5AQZfVANrD8cSN4NsRV1CVnybtzPP2EyRW475w_p6w@mail.gmail.com> |
I'm getting the following in syslog: Mar 19 01:52:50 x smartd[5280]: Device: /dev/sda [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Mar 19 01:52:50 x smartd[5280]: Device: /dev/sdb [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Mar 19 01:52:50 x smartd[5280]: Device: /dev/sdc [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Mar 19 08:22:50 x smartd[5280]: Device: /dev/sda [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Mar 19 08:22:50 x smartd[5280]: Device: /dev/sdc [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Mar 19 08:52:51 x smartd[5280]: Device: /dev/sdb [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Mar 19 09:22:50 x smartd[5280]: Device: /dev/sda [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Mar 19 09:22:50 x smartd[5280]: Device: /dev/sdb [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Mar 19 09:22:50 x smartd[5280]: Device: /dev/sdc [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 as you can see, all drives are getting the same change at the same time for the same value. Pretty strange. Is this a bug or something is happening ? Disks are pretty new, only about 5600 hours. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot