HD dying?
David Niklas <[email protected]> Wed, 5 Apr 2017 20:26:12 -0400
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <20170405202612.70964ebc@ulgy_thing> |
Hello,
First of all, I *have* been backing up my data.
I'm going to post LOTS of details here, fell free to skim.
My problem is that once upon a time my drived failed < 6 months after I
bought my laptop. Sending it to a professional did not help, nor did
replacing the PCB, it was dead.
The symptoms leading up to the event was a sudden freeze of the OS. I was
not too bright about Linux at the time, so I thought that perhaps X froze.
Now I'm getting the identical thing, a sudden freeze. I can ping the
kernel, I cannot restore the frame buffer, sync, or umount the
file systems. My syslog metalog records no messages during this period,
it is set to sync the dmesg messages. I cannot ssh, but I can uses sysreq
to reboot. I'm using OpenRC.
This has happened twice or three times.
I just ran a self test and it says PASSED, I'm not seeing anything that
stands out.
smartmontools-6.4
Gentoo Linux 4.9.x
Below is my S.M.A.R.T. data. BTW: it is unwrapped.
What do you think?
Thanks, David
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile
Device Model: WDC WD7500BPVX-22JC3T0
Serial Number: WD-WXC1A14E1823
LU WWN Device Id: 5 0014ee 209f3d675
Firmware Version: 01.01A01
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Apr 4 14:47:54 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13920) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 157) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 196 179 021 Pre-fail Always - 1166
4 Start_Stop_Count 0x0032 058 058 000 Old_age Always - 42367
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 13532
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1695
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 124
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 158
193 Load_Cycle_Count 0x0032 183 183 000 Old_age Always - 51774
194 Temperature_Celsius 0x0022 107 091 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13529 -
# 2 Extended offline Completed without error 00% 12288 -
# 3 Extended offline Completed without error 00% 9247 -
# 4 Extended offline Completed without error 00% 7609 -
# 5 Extended offline Completed without error 00% 5469 -
# 6 Short offline Completed without error 00% 0 -
# 7 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot