Drive errors in boot logs, but NOT in smartctl, and still runs ok after completing boot. What's wrong with this drive?
[email protected] Sat, 29 Apr 2017 11:09:31 -0700
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <1493489371.1275540.960440928.693434B5@webmail.messagingengine.com> |
I've got a secondary (not 'boot' or 'root') drive attached in my system.
It's "complaining" in boot logs, but seems to NOT have an issue reported by 'smartctl', and works OK after booting.
I'd appreciate any ideas as to what the problem IS, or if there's really is one -- and what to do to fix it. Entirely poosible that I just don't understand what I'm seeing here :-/
On boot I see these messages, but the system ends up booted and functional -- including all the data on this drive,
dmesg | egrep -i "ata2|ata-2"
[ 2.790815] ata2: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff980 irq 22
[ 3.273185] ata2: softreset failed (device not ready)
[ 3.276322] ata2: applying PMP SRST workaround and retrying
[ 3.456395] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.468932] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 3.471995] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.488495] ata2.00: configured for UDMA/133
[ 35.922130] ata2.00: exception Emask 0x0 SAct 0x20000000 SErr 0x80000 action 0x6 frozen
[ 35.926153] ata2: SError: { 10B8B }
[ 35.930101] ata2.00: failed command: READ FPDMA QUEUED
[ 35.934077] ata2.00: cmd 60/08:e8:00:00:00/00:00:00:00:00/40 tag 29 ncq dma 4096 in
[ 35.942198] ata2.00: status: { DRDY }
[ 35.946311] ata2: hard resetting link
[ 36.426065] ata2: softreset failed (device not ready)
[ 36.430247] ata2: applying PMP SRST workaround and retrying
[ 36.594063] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 36.603874] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 36.608124] ata2.00: revalidation failed (errno=-5)
[ 41.797584] ata2: hard resetting link
[ 42.277519] ata2: softreset failed (device not ready)
[ 42.281749] ata2: applying PMP SRST workaround and retrying
[ 42.445513] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 42.455368] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 42.459702] ata2.00: revalidation failed (errno=-5)
[ 42.464016] ata2: limiting SATA link speed to 1.5 Gbps
[ 47.685034] ata2: hard resetting link
[ 48.164970] ata2: softreset failed (device not ready)
[ 48.169275] ata2: applying PMP SRST workaround and retrying
[ 48.332964] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.348678] ata2.00: configured for UDMA/133
[ 48.352981] ata2.00: device reported invalid CHS sector 0
[ 48.357355] ata2: EH complete
'ata2' corresponds to /dev/sdb on my system
find /dev/disk | egrep -i "ata2|ata-2"
/dev/disk/by-path/pci-0000:00:11.0-ata-2-part1
/dev/disk/by-path/pci-0000:00:11.0-ata-2
ls -al `find /dev/disk | egrep -i "ata2|ata-2"`
lrwxrwxrwx 1 root root 9 Apr 29 10:50 /dev/disk/by-path/pci-0000:00:11.0-ata-2 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 29 10:50 /dev/disk/by-path/pci-0000:00:11.0-ata-2-part1 -> ../../sdb1
Checking the smartctl data for that drive
smartctl -H /dev/sdb
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.13-2.ge5d11ce-default] (SUSE RPM)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
smartctl -x /dev/sdb
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.13-2.ge5d11ce-default] (SUSE RPM)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F3
Device Model: SAMSUNG HD103SJ
Serial Number: S246J9EZC03669
LU WWN Device Id: 5 0024e9 2042536ec
Firmware Version: 1AJ10001
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Apr 29 10:57:37 2017 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9360) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 156) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0
2 Throughput_Performance -OS--K 056 054 000 - 8531
3 Spin_Up_Time PO---K 075 069 025 - 7623
4 Start_Stop_Count -O--CK 098 098 000 - 2285
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 27432
10 Spin_Retry_Count -O--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 252 252 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2236
191 G-Sense_Error_Rate -O---K 100 100 000 - 24
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 048 000 - 33 (Min/Max 15/52)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 098 098 000 - 1162
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 0
223 Load_Retry_Count -O--CK 252 252 000 - 0
225 Load_Cycle_Count -O--CK 100 100 000 - 2301
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 1162 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1162 [1] occurred at disk power-on lifetime: 27432 hours (1143 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 01 00 08 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 00 00 00 00 40 00 00:00:00.000 READ FPDMA QUEUED
60 00 10 00 08 00 00 00 00 00 00 40 08 00:00:00.044 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.043 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.043 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.043 IDENTIFY DEVICE
Error 1161 [0] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 01 00 08 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 00 00 00 00 40 00 00:00:00.000 READ FPDMA QUEUED
60 00 10 00 08 00 00 00 00 00 00 40 08 00:00:00.046 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.046 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.046 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.046 IDENTIFY DEVICE
Error 1160 [7] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 01 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT
c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE
91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4]
00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands]
Error 1159 [6] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT
c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE
91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4]
00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands]
Error 1158 [5] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT
c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE
91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4]
00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands]
Error 1157 [4] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT
25 20 20 00 01 00 00 00 00 00 08 e0 00 00:00:00.036 READ DMA EXT
c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE
91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4]
Error 1156 [3] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 09 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 9 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 01 00 00 00 00 00 08 e0 00 00:00:00.036 READ DMA EXT
c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE
91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4]
00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands]
Error 1155 [2] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT
c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE
91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4]
00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands]
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4157 -
# 2 Short offline Completed without error 00% 4114 -
# 3 Extended offline Completed without error 00% 4073 -
# 4 Short offline Completed without error 00% 4056 -
# 5 Short offline Completed without error 00% 4011 -
# 6 Extended offline Completed without error 00% 3968 -
# 7 Short offline Completed without error 00% 3949 -
# 8 Short offline Completed without error 00% 3905 -
# 9 Extended offline Completed without error 00% 3903 -
#10 Short offline Completed without error 00% 3846 -
#11 Short offline Completed without error 00% 3801 -
#12 Extended offline Completed without error 00% 3761 -
#13 Short offline Completed without error 00% 3745 -
#14 Extended offline Completed without error 00% 3664 -
#15 Short offline Completed without error 00% 3646 -
#16 Short offline Completed without error 00% 3606 -
#17 Extended offline Completed without error 00% 3568 -
#18 Short offline Completed without error 00% 3552 -
#19 Short offline Completed without error 00% 3507 -
#20 Extended offline Completed without error 00% 3468 -
#21 Short offline Completed without error 00% 3451 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 33/33 Celsius
Lifetime Min/Max Temperature: 18/65 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (114)
Index Estimated Time Temperature Celsius
115 2017-04-29 00:20 32 *************
... ..( 5 skipped). .. *************
121 2017-04-29 00:50 32 *************
122 2017-04-29 00:55 34 ***************
123 2017-04-29 01:00 36 *****************
124 2017-04-29 01:05 36 *****************
125 2017-04-29 01:10 37 ******************
... ..( 10 skipped). .. ******************
8 2017-04-29 02:05 37 ******************
9 2017-04-29 02:10 36 *****************
10 2017-04-29 02:15 35 ****************
11 2017-04-29 02:20 35 ****************
12 2017-04-29 02:25 34 ***************
... ..( 6 skipped). .. ***************
19 2017-04-29 03:00 34 ***************
20 2017-04-29 03:05 33 **************
... ..( 3 skipped). .. **************
24 2017-04-29 03:25 33 **************
25 2017-04-29 03:30 34 ***************
... ..( 26 skipped). .. ***************
52 2017-04-29 05:45 34 ***************
53 2017-04-29 05:50 35 ****************
... ..( 11 skipped). .. ****************
65 2017-04-29 06:50 35 ****************
66 2017-04-29 06:55 36 *****************
67 2017-04-29 07:00 35 ****************
... ..( 5 skipped). .. ****************
73 2017-04-29 07:30 35 ****************
74 2017-04-29 07:35 36 *****************
75 2017-04-29 07:40 35 ****************
... ..( 10 skipped). .. ****************
86 2017-04-29 08:35 35 ****************
87 2017-04-29 08:40 34 ***************
88 2017-04-29 08:45 33 **************
89 2017-04-29 08:50 33 **************
90 2017-04-29 08:55 21 **
91 2017-04-29 09:00 24 *****
92 2017-04-29 09:05 26 *******
93 2017-04-29 09:10 27 ********
94 2017-04-29 09:15 28 *********
95 2017-04-29 09:20 29 **********
96 2017-04-29 09:25 30 ***********
97 2017-04-29 09:30 30 ***********
98 2017-04-29 09:35 31 ************
99 2017-04-29 09:40 31 ************
100 2017-04-29 09:45 32 *************
... ..( 2 skipped). .. *************
103 2017-04-29 10:00 32 *************
104 2017-04-29 10:05 33 **************
... ..( 9 skipped). .. **************
114 2017-04-29 10:55 33 **************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 1 Command failed due to ICRC error
0x0002 4 5 R_ERR response for data FIS
0x0003 4 5 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 1 R_ERR response for non-data FIS
0x0006 4 1 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 1 Device-to-host non-data FIS retries
0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 1 Vendor specific
0x8e01 4 6 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 1 Vendor specific
0x8e07 4 2 Vendor specific
0x8e08 4 6 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 26 Vendor specific
0x8e0b 4 1792 Vendor specific
0x8e0c 4 110 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 26 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 104 Vendor specific
0x8e11 4 6 Vendor specific
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot