Re: [ANNOUNCE] VDR developer version 2.3.9

Hi Klaus,

My contribution to the translation of VDR.

Regards,
Yarema

2018-03-18 14:54 GMT+01:00 Klaus Schmidinger <[email protected]>:
> VDR developer version 2.3.9 is now available at
>
>       ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.9.tar.bz2
>
> A 'diff' against the previous version is available at
>
>       ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.8-2.3.9.diff
>
> MD5 checksums:
>
> 9e4202b046df9ea960d930ce99e967ab  vdr-2.3.9.tar.bz2
> 38a0f436fbed219665725aa2e54a9ca0  vdr-2.3.8-2.3.9.diff
>
> Approaching version 2.4.0:
> ==========================
>
> If there are no more serious bug reports, the final version 2.4.0 of VDR
> shall be released on April 15.
> So please test this developer version intensely and report any problems
> you might encounter as soon as possible.
>
> The following language files still have the given number of untranslated
> texts:
>
> PLUGINS/src/hello/po/ca_ES.po: 6
> PLUGINS/src/hello/po/da_DK.po: 6
> PLUGINS/src/hello/po/el_GR.po: 6
> PLUGINS/src/hello/po/es_ES.po: 6
> PLUGINS/src/hello/po/fr_FR.po: 6
> PLUGINS/src/hello/po/hu_HU.po: 6
> PLUGINS/src/hello/po/nl_NL.po: 6
> PLUGINS/src/hello/po/nn_NO.po: 6
> PLUGINS/src/hello/po/pt_PT.po: 6
> PLUGINS/src/hello/po/ro_RO.po: 6
> PLUGINS/src/hello/po/sl_SI.po: 6
> PLUGINS/src/hello/po/sv_SE.po: 6
> po/ar.po: 76
> po/ca_ES.po: 76
> po/cs_CZ.po: 22
> po/da_DK.po: 208
> po/el_GR.po: 271
> po/es_ES.po: 22
> po/et_EE.po: 7
> po/fi_FI.po: 3
> po/fr_FR.po: 22
> po/hr_HR.po: 208
> po/hu_HU.po: 22
> po/it_IT.po: 3
> po/lt_LT.po: 22
> po/mk_MK.po: 22
> po/nl_NL.po: 22
> po/nn_NO.po: 336
> po/pt_PT.po: 104
> po/ro_RO.po: 22
> po/ru_RU.po: 10
> po/sk_SK.po: 22
> po/sl_SI.po: 77
> po/sr_RS.po: 76
> po/sv_SE.po: 22
> po/tr_TR.po: 208
> po/uk_UA.po: 22
> po/zh_CN.po: 76
>
> If nobody takes care of these, they will remain untranslated in version
> 2.4.0.
>
>
>
> The changes since version 2.3.8:
>
> - Updated the Italian OSD texts (thanks to Diego Pierotto).
> - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
> - Fixed a possible crash when stopping VDR (thanks to Matthias Senzel for
> reporting and
>   helping to debug this one).
> - Fixed handling VPS events outside the LingerLimit, which could cause
> recordings to
>   stop prematurely (thanks to Johann Friedrichs).
> - Fixed an invalid lock sequence when trying to remove a deleted recording
> in case
>   of low disk space.
> - Now making sure that AssertFreeDiskSpace() is called with the maximum
> timer
>   priority in case there are several timers recording with different
> priorities.
> - The MTD mapper now avoids immediately reusing unique PIDs when switching
> channels,
>   to prevent possible problems with old data in buffers (thanks to Onur
> Sentürk).
> - The function cDevice::GetVideoSystem() (which has been deprecated since
> version 2.1.6)
>   has been finally removed.
> - The macros used to control deprecated code or functions have been changed
> to hold
>   numeric values (0 and 1), so that they can be controlled at compile time,
> without
>   having to edit the actual source code (suggested by Jasmin Jessich).
> - The default for DEPRECATED_VDR_CHARSET_OVERRIDE has been set to 0, which
> means VDR
>   no longer reacts on the environment variable VDR_CHARSET_OVERRIDE. You can
> add
>   'DEPRECATED_VDR_CHARSET_OVERRIDE=1' when compiling in order to restore
> this
>   functionality. However, it is recommended to use the command line option
> --chartab
>   instead.
> - The timeout for the channel display is now reset whenever the channel or
> EPG data
>   changes.
> - OSD menus now try to keep the offset of the list cursor at a constant
> position on
>   the screen, even if the list is modified while being displayed.
> - The LCARS skin's main menu now reacts to changes of the current channel's
> name.
> - If an event in the Schedules menu is marked with a 'T' or 'I' and the user
> presses the
>   Red button to edit the timer, local timers are now preferred over remote
> timers
>   in case there is more than one timer that will record that event.
> - Switching the primary device is no longer done via osSwitchDvb (which has
> been
>   removed), but rather by the main program loop reacting to changes in
> Setup.PrimaryDVB.
> - The new SVDRP commands 'LSTD' and 'PRIM' can be used to list all available
> devices
>   and to switch the primary device (thanks to Thomas Reufer).
> - Added some comments regarding font height (thanks to Thomas Reufer).
> - Fixed handling timers during the change from DST to winter time (thanks to
> Johann
>   Friedrichs).
> - Added missing checks of 'player' in member functions of cControl, and
> setting
>   cControl::player to NULL in cDvbPlayerControl::Stop() to avoid a possible
> crash
>   with plugins that retrieve player information after a replay has been
> stopped, but
>   before the replay control has been destroyed (thanks to Johann Friedrich).
> - Now calling Hide() and cStatus::MsgReplaying(..., false) from
> cReplayControl::Stop(),
>   to inform plugins about an ending replay session before the replay control
> gets
>   destroyed.
> - Fixed a possible crash when moving a recording between different volumes
> (reported by
>   Matthias Senzel).
> - Fixed positioning the cursor in the Recordings menu when moving a
> recording between
>   different volumes.
> - Added a note to PLUGINS.html about writing log messages in English.
> - Fixed a deadlock when moving a folder containing several recordings
> between
>   different volumes (reported by Matthias Senzel).
> - Fixed positioning to the current item when changing the sort mode in the
> Recordings
>   menu, in case there is a LastReplayed recording.
> - The CAM menu is now automatically closed when the current channel is
> switched
>   (suggested by Dietmar Spingler).
> - Fixed a lengthy write lock on the Recordings list in case of moving a
> folder with
>   more than one recording (thanks to Matthias Senzel).
> - If TS packets are not accepted by the output device in Transfer Mode, this
> is now
>   reported only once per minute in the log file.
> - The new setup option "OSD/Sorting direction for recordings" can be used to
> switch
>   the sequence in which recordings are presented in the "Recordings" menu
> between
>   ascending (oldest first) and descendeng (newest first) (thanks to Matthias
> Senzel).
> - When moving recordings between volumes, the "Recordings" menu now displays
> those items
>   that have not yet been moved completely as non-selectable. This avoids
> situations
>   where trying to play such a recording might fail.
> - Fixed canceling moving a folder with several recordings between volumes.
> - When moving a recording to a different folder, the cursor is no longer
> placed on the
>   new location of the recording, but rather stays in the original folder
> (suggested by
>   Matthias Senzel). If the original folder got empty by moving away the last
> recording
>   it contained, the cursor is moved up until a non empty folder is found.
> - Changed the log message ""ERROR: copying directory '%s' to '%s' ended
> prematurely" from
>   "error" to "info", because any actual error would have already been
> reported before this
>   (suggested by Matthias Senzel).
> - When selecting a folder for a recording or timer, it is now possible to
> open a folder
>   even if it doesn't contain any subfolders (suggested by Matthias Senzel).
> - Fixed a possible deadlock when detaching a receiver from a device.
> - Moved any locking from cutter.c into recording.c, to avoid a problem with
> locking
>   the Recordings list (reported by Matthias Senzel).
> - Now using the 'example' macro in vdr.5 (thanks to Chris Mayo).
> - Now unlocking the Recordings list before displaying an error message in
>   cMenuPathEdit::ApplyChanges() and cReplayControl::Stop() (reported by
> Matthias Senzel).
> - Fixed a possible deadlock when quickly zapping through encrypted channels
> (reported
>   by Jörg Wendel).
> - The new function cStatus::MarksModified() can be implemented by plugins to
> get
>   informed about any modifications to the editing marks of the currently
> played
>   recording (based on a patch from Jörg Wendel).
> - Fixed handling editing marks in the replay progress display, in case the
> marks are
>   deleted via the Info/Edit menu of the currently played recording (the
> progress
>   display still displayed them).
> - Limited some CAM related log messages to the actual master CAM, if any.
> - The Perl script 'peerdemo' shows how one can find all the VDRs in the
> local network
>   using the peer connection mechanism.
> - Added the UPDATE-2.4.0 file.
> - Making sure cSVDRPClient::Process() reads the entire reply once it started
> reading,
>   even if no Response parameter is given.
> - Replaced the warning regarding the open SVDRP port in the INSTALL file
> with a remark
>   about using svdrphosts.conf to completely disable SVDRP access.
> - Added a note about the fixed UDP port for SVDRP discovery to vdr.1.
> - Fixed updating the Timers menu after turning a local timer on/off with the
> Red
>   button.
> - Fixed keeping the cursor position in the Recordings menu in case a timer
> starts
>   recording while the menu is open.
> - When a timer is newly created in the Timers menu, it now immediately
> appears at the
>   correct position in the list, rather than first being added at the end and
> then
>   jumping to the proper offset.
> - Fixed getting the info of a newly edited recording (reported by Matthias
> Senzel).
> - Improved calculating signal strength and quality (thanks to Helmut
> Binder).
> - While a timer is recording, the file '.timer' in the recording directory
> now contains
>   the full id of the timer that is currently recording into this directory.
> This is used
>   to determine whether a timer is still recording on a remote VDR when
> deleting a recording
>   from the Recordings menu.
> - Fixed handling SVDRP peering for more than one instance of VDR on the same
> machine, and
>   improved logging and debug output.
> - Fixed case inconsistency with SVDRPDefaultHost in config.c.
> - Added a section about the '.sort' file to vdr.5.
> - Initiating the client side of a peer-to-peer SVDRP connection is now done
> with the new
>   SVDRP command CONN instead of using the UDP port with the server's
> address.
>   This change requires that all VDRs that shall take part in a peer-to-peer
> network need
>   to be updated to this version.
> - Moved handling remote timers into
> cSVDRPClientHandler::ProcessConnections().
> - Combined Start/StopSVDRPServer/ClientHandler() into
> Start/StopSVDRPHandler().
> - Updated the Polish OSD texts (thanks to Tomasz Maciej Nowak).
> - When remote timers are fetched from a peer VDR, we no longer blindly
> delete and re-add
>   them, but rather compare them and make only the minimum necessary changes.
> - Fixed the CompareInts() function.
> - Disabled the use of posix_fadvise() when reading (i.e. replaying), since
> it caused
>   stuttering replay in fast forward and fast rewind mode in case the video
> directory
>   is mounted via NFS. You can re-enable it by setting the macro
> USE_FADVISE_READ to 1
>   in tools.c.
> - Modified cStateLock's SetExplicitModify() and IncState() (changed to
> SetModified()) to
>   allow for the introduction of syncing a separate cStateKey to a
> cStateLock.
> - Assigning events to timers no longer triggers sending a POLL to all peer
> VDRs.
> - When making modifications to remote timers, the local VDR no longer sends
> a POLL to
>   all remote VDRs.
> - Fixed removing a cStateKey from a cStateLock (setting StateKey.stateLock =
> NULL was
>   done too late, after the lock had already been released).
> - Now writing the info file before attaching the recorder to the device, to
> make sure it
>   is present when the recorder needs to update the fps value.
> - Making sure the Schedules menu has a proper title, even if it is empty.
> - Removed sending the SVDRP command UPDR to peer VDRs whenever a change is
> made to the
>   recordings in the video directory (which was introduced in version 2.3.8),
> because it
>   triggered re-reading the video directory too fast.
> - Improved handling VPS timers to better react to EPG changes during an
> ongoing recording.
> - Commented out the logging in cMarks::Align(), to avoid log entries in case
> of editing
>   marks that are not generated by VDR itself, and thus may be a little off
> (suggested by
>   Jörg Wendel). You can activate this line again for debugging if necessary.
> - Made the input buffer in cSVDRPClient dynamic.
> - Fixed handling parameters in the S2SatelliteDeliverySystemDescriptor and
>   T2DeliverySystemDescriptor that were overwritten when parsing the
>   SatelliteDeliverySystemDescriptor or TerrestrialDeliverySystemDescriptor,
> respectively.
> - Modified cMenuTimers::Delete() to avoid a lengthy lock on the Timers list
> while prompting
>   the user.
>
> Have fun!
>
> Klaus
>
> _______________________________________________
> vdr mailing list
> [email protected]
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

_______________________________________________
vdr mailing list
[email protected]
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr