Re: reboot -f in guest not working with recent Vserver versions
Christian Balzer <[email protected]>
| Newsgroups | gmane.linux.vserver |
|---|---|
| Organization | FusionGOL |
| Message-ID | <[email protected]> |
Hello John, On Wed, 21 Dec 2011 01:06:42 -0600 John Alberts wrote: > I had the same problem a while ago upgrading to something above 2.6.32 I > think. The solution was to put restart script in a vshelper directory. > Thanks for that input, alas it doesn't work. I tried it both with the script in .defaults and the individual vserver config tree. When the script is present (and executable) reboot -f will take a second or so for the prompt to return. No output and no action, the vserver stays up. Any other ideas? Obviously this is doing something but not quite what's desired. ^.^ > For each guest on the host, put the following: > > cat /etc/vservers/<guestname>/apps/vshelper/restart > #!/bin/bash > > echo "vserver <guestname> restart" | at now > > > Once you do that, 'reboot -f' should work again. > > John > > > On Tue, Dec 20, 2011 at 11:43 PM, Christian Balzer <[email protected]> wrote: > > > > > Hello, > > > > Client OS is Debian Squeeze, identical install in both cases. > > Host OS is also Debian Squeeze with custom kernel. > > Older one runs: > > > > Kernel: 2.6.33.5-vs2.3.0.36.30.4 > > VS-API: 0x00020305 > > util-vserver: 0.30.215; Jun 18 2010, 13:35:17 > > > > Newer one runs: > > Kernel: 3.0.7-vs2.3.1 > > VS-API: 0x00020308 > > VCI: 0x0000000013001f11 > > util-vserver: 0.30.216-pre2986; Aug 29 2011, 07:49:51 > > > > As the tin says, reboot -f inside a guest works on the old one, but > > not on the new one. > > That is, on the new one it will shut down, but not restart. > > > > Regards, > > > > Christian > > -- > > Christian Balzer Network/Systems Engineer > > [email protected] Global OnLine Japan/Fusion Communications > > http://www.gol.com/ > > > > > -- Christian Balzer Network/Systems Engineer [email protected] Global OnLine Japan/Fusion Communications http://www.gol.com/