Re: CMUCL 18c building on tru64 5.1

Hello Ray,

the sigsegv happens calling funcall0(initial_function)... at line 702
in main function.

ladebug under Tru64 is very cool ;-)

now... what is the purpose of funcall0 ?

regards,
Fausto



2014-09-03 19:08 GMT+02:00 Raymond Toy <[email protected]>:
>
>
>
> On Wed, Sep 3, 2014 at 9:29 AM, Fausto Saporito <[email protected]>
> wrote:
>>
>> Hello Ray,
>>
>> in the alpha-cross and alpha-target log... there are no errors. it
>> compiles like a knive in the butter :)
>
>
> Cool!
>
>>
>>
>> But maybe "interrupt_handle_now" could refers to a feature we excluded
>> from the build.
>>
>> this is the "back" output
>>
>> ldb> back
>> Backtrace:
>> <Frame 0x50000000 [interrupted], CODE: 0x3029472F, %INITIAL-FUNCTION,
>> <no LRA>, PC: 0xcfd6b7b8>
>
>
> Ok, that's not very helpful. You have to break out your debugger to figure
> out why you're getting signal 11. (segv?)
>
>>
>>
>> About 18c test, can I use the 19c binaries (on linux) to cross-compile
>> a 18c, or do I have to install a 18c linux binaries ?
>
>
> It's best to use the same version, so use 18c binaries.
>
> Good luck!
> --
> Ray
>
>>
>>
>> thanks,
>> Fausto
>>
>> 2014-09-03 18:24 GMT+02:00 Raymond Toy <[email protected]>:
>> >
>> >
>> >
>> > On Wed, Sep 3, 2014 at 4:57 AM, Fausto Saporito
>> > <[email protected]>
>> > wrote:
>> >>
>> >> ok.. I fixed the version problem: created a file, in alpha-target/lisp
>> >> directory, "version" with "-1" in it.
>> >> Now the version matches with kernel.core (version 0).
>> >>
>> >> But it seems a needed feature is missing:
>> >>
>> >> axpvm01.gitanes.taz> lisp -core kernel.core
>> >> interrupt_handle_now: No handler for signal 11?
>> >> LDB monitor
>> >>
>> >> ldb>
>> >>
>> >
>> > This is really great! But now comes the hard part.
>> >
>> > First, I would check the logs for any errors and see if they're
>> > relevant.
>> > Post the errors here.
>> >
>> > Second, from ldb you can try "back" to get a backtrace. That might have
>> > pointers to what might have gone wrong.
>> >
>> > Third, if none of the above work, you'll have to get out your debugger
>> > and
>> > see what is causing signal 11.  This is the hard part.
>> >
>> > Since it seems you can successfully cross-compile from 19c, perhaps it
>> > would
>> > be easiest to go back farther and try again with 18c or something. It
>> > might
>> > be easier to get something going and then we can think about getting
>> > alpha
>> > running on a more up-to-date version of the code.
>> >
>> > Good luck!
>> >
>> >>
>> >>
>> >>
>> >> 2014-09-03 13:39 GMT+02:00 Fausto Saporito <[email protected]>:
>> >> > Hello all,
>> >> >
>> >> > ok... this is a real blocking error:
>> >> >
>> >> > axpvm01.gitanes.taz> alpha-target/lisp/lisp -core
>> >> > alpha-target/lisp/kernel.core
>> >> > WARNING: startup-code version (2) different from core version (0).
>> >> > You may lose big.
>> >> > interrupt_handle_now: No handler for signal 11?
>> >> > LDB monitor
>> >> > ldb> quit
>> >> > Really quit? [y]
>> >> >
>> >> > and really I cannot understand the reason.
>> >> > kernel.core has been generated with the same sources of the lisp
>> >> > frontend! Why there's this version mismatch ?
>> >> >
>> >> > I changed internals.h cause it was totally wrong (feature list
>> >> > section) and I copied them from internals.inc ... is it correct ?
>> >> > But internals.inc has much more features than cross.lisp, maybe this
>> >> > could be the problem...
>> >> >
>> >> > FEATURE_CMU18E = 1
>> >> > FEATURE_CMU18 = 1
>> >> > FEATURE_BSD = 1
>> >> > FEATURE_OSF1 = 1
>> >> > FEATURE_ALPHA = 1
>> >> > FEATURE_CMU = 1
>> >> > FEATURE_IEEE_FLOATING_POINT = 1
>> >> > FEATURE_ANSI_CL = 1
>> >> > FEATURE_COMMON_LISP = 1
>> >> > FEATURE_COMMON = 1
>> >> > FEATURE_HASH_NEW = 1
>> >> > FEATURE_RANDOM_MT19937 = 1
>> >> > FEATURE_UNIX = 1
>> >> > FEATURE_RELATIVE_PACKAGE_NAMES = 1
>> >> > FEATURE_MODULAR_ARITH = 1
>> >> > FEATURE_CONSERVATIVE_FLOAT_TYPE = 1
>> >> > FEATURE_PYTHON = 1
>> >> > FEATURE_CMU19C = 1
>> >> > FEATURE_CMU19 = 1
>> >> > FEATURE_PCL = 1
>> >> > <-----
>> >> > FEATURE_PORTABLE_COMMONLOOPS = 1
>> >> > FEATURE_PCL_STRUCTURES = 1
>> >> > FEATURE_GERDS_PCL = 1
>> >> > FEATURE_BOOTSTRAP = 1
>> >> > FEATURE_NO_PCL = 1
>> >> > <-----
>> >> > FEATURE_NO_CLX = 1
>> >> > FEATURE_NO_CLM = 1
>> >> > FEATURE_NO_HEMLOCK = 1
>> >> > FEATURE_LITTLE_ENDIAN = 1
>> >> >
>> >> > Is it correct
>> >> >
>> >> > FEATURE_PCL = 1
>> >> >
>> >> > then
>> >> >
>> >> > FEATURE_NOPCL = 1
>> >> >
>> >> > ???
>> >> >
>> >> > regards,
>> >> > Fausto
>> >> >
>> >> > 2014-09-03 13:13 GMT+02:00 Fausto Saporito
>> >> > <[email protected]>:
>> >> >> This is trivial .. I suppose.
>> >> >> I'm using standard Tru64 5.1b C compiler, but it seems generates a
>> >> >> Depend file gmake doesn't like too much :-)
>> >> >> I'm using gmake 3.80, is there a mandatory version ?
>> >> >>
>> >> >> gmake: Entering directory `/usr/users/fausap/CMU/alpha-target/lisp'
>> >> >> Depends:454: *** missing separator.  Stop.
>> >> >> gmake: Leaving directory `/usr/users/fausap/CMU/alpha-target/lisp'
>> >> >>
>> >> >> this code starts at line 454
>> >> >>
>> >> >> struct array {
>> >> >>     lispobj header;
>> >> >>     lispobj fill_pointer;
>> >> >>     lispobj fill_pointer_p;
>> >> >>     lispobj elements;
>> >> >>     lispobj data;
>> >> >>     lispobj displacement;
>> >> >>     lispobj displaced_p;
>> >> >>     lispobj dimensions[1];
>> >> >> };
>> >> >>
>> >> >> thanks,
>> >> >> Fausto
>> >> >>
>> >> >> 2014-09-03 11:39 GMT+02:00 Fausto Saporito
>> >> >> <[email protected]>:
>> >> >>> Ohhhh ... BIG NeWS!
>> >> >>>
>> >> >>> 19c works! Cross compiling was fine.
>> >> >>> Now if I understood well, I have to move all the alpha-target
>> >> >>> directory in Tru64 and recompile... correct ?
>> >> >>> Using src/tools/build-world.sh script ?
>> >> >>>
>> >> >>> thanks
>> >> >>> Fausto
>> >> >>>
>> >> >>>
>> >> >>> 2014-09-03 11:28 GMT+02:00 Fausto Saporito
>> >> >>> <[email protected]>:
>> >> >>>> Hello all,
>> >> >>>>
>> >> >>>> I saw there're some patches for 19c and 19d and I found how to
>> >> >>>> apply
>> >> >>>> them.
>> >> >>>> The question is: how can I update the lisp.core ? Is it needed ?
>> >> >>>> Or
>> >> >>>> do
>> >> >>>> I have to load each time those patches ?
>> >> >>>>
>> >> >>>> thanks,
>> >> >>>> Fausto
>> >> >>>>
>> >> >>>>
>> >> >>>> 2014-09-03 8:41 GMT+02:00 Fausto Saporito
>> >> >>>> <[email protected]>:
>> >> >>>>> Hello Ray,
>> >> >>>>>
>> >> >>>>> no luck with 19d. But maybe it has the double-double support
>> >> >>>>> too...
>> >> >>>>>
>> >> >>>>> I have the same errors, but instead of sigsegv at the end, I got
>> >> >>>>> a
>> >> >>>>> stack overflow:
>> >> >>>>>
>> >> >>>>> Control stack overflow
>> >> >>>>>    [Condition of type STACK-OVERFLOW]
>> >> >>>>>
>> >> >>>>> Restarts:
>> >> >>>>>   0: [CONTINUE] Blow this file
>> >> >>>>>   1:            Return NIL from load of "target:tools/worldcom".
>> >> >>>>>   2: [ABORT   ] Return to Top-Level.
>> >> >>>>>
>> >> >>>>> Debug  (type H for help)
>> >> >>>>>
>> >> >>>>> (YELLOW-ZONE-HIT)
>> >> >>>>> Source:
>> >> >>>>> ; File: target:code/interr.lisp
>> >> >>>>> (ERROR 'STACK-OVERFLOW)
>> >> >>>>>
>> >> >>>>> and in compile-compiler.log I found again a DOUBLE-DOUBLE
>> >> >>>>> reference:
>> >> >>>>>
>> >> >>>>> ; Comment: $Header:
>> >> >>>>> /project/cmucl/cvsroot/src/compiler/new-assem.lisp,v 1.34
>> >> >>>>> 2004/08/02
>> >> >>>>> 16:04:42 cwang Exp $
>> >> >>>>>
>> >> >>>>> ; Compiling DEFUN SEGMENT-MAP-OUTPUT:
>> >> >>>>>
>> >> >>>>> Bound is not *, a DOUBLE-DOUBLE-FLOAT or a list of a
>> >> >>>>> DOUBLE-DOUBLE-FLOAT: 0
>> >> >>>>>
>> >> >>>>> Aborting...
>> >> >>>>>
>> >> >>>>> I'll try with 19c
>> >> >>>>>
>> >> >>>>> 2014-09-03 8:29 GMT+02:00 Fausto Saporito
>> >> >>>>> <[email protected]>:
>> >> >>>>>> Hello Ray,
>> >> >>>>>>
>> >> >>>>>> I started with 19d, but I have this strange error:
>> >> >>>>>>
>> >> >>>>>> ; Error: (during macroexpansion)
>> >> >>>>>> ;
>> >> >>>>>> ; Error in function META-SC-OR-LOSE:
>> >> >>>>>> ;    DOUBLE-DOUBLE-REG is not a defined storage class.
>> >> >>>>>> ; ;
>> >> >>>>>>
>> >> >>>>>> ; Error: (during macroexpansion)
>> >> >>>>>> ;
>> >> >>>>>> ; Error in function META-SC-OR-LOSE:
>> >> >>>>>> ;    COMPLEX-DOUBLE-DOUBLE-REG is not a defined storage class.
>> >> >>>>>>
>> >> >>>>>> but in 19d there shouldn't be support for DOUBLE-DOUBLE ...
>> >> >>>>>> correct
>> >> >>>>>> ?
>> >> >>>>>>
>> >> >>>>>> I'm using 19d binaries to cross-build 19d
>> >> >>>>>>
>> >> >>>>>> 2014-09-03 4:17 GMT+02:00 Raymond Toy <[email protected]>:
>> >> >>>>>>>
>> >> >>>>>>>
>> >> >>>>>>>
>> >> >>>>>>> On Tue, Sep 2, 2014 at 4:53 PM, Fausto Saporito
>> >> >>>>>>> <[email protected]>
>> >> >>>>>>> wrote:
>> >> >>>>>>>>
>> >> >>>>>>>> Hello Raymond,
>> >> >>>>>>>>
>> >> >>>>>>>> thanks for these hints about cross.lisp
>> >> >>>>>>>> I put in the proper section the unwanted feature.
>> >> >>>>>>>>
>> >> >>>>>>>> So, if I force the redefinition of those symbols at the end of
>> >> >>>>>>>> alpha-cross compiling phase, alpha-target starts but I noticed
>> >> >>>>>>>> this
>> >> >>>>>>>> error among the others:
>> >> >>>>>>>>
>> >> >>>>>>>> ; File:
>> >> >>>>>>>> /home/fausap/CMUCL/git-ver/cmucl/src/code/lispinit.lisp
>> >> >>>>>>>>
>> >> >>>>>>>> ; In: DEFUN SLEEP
>> >> >>>>>>>>
>> >> >>>>>>>> ;   (ERROR 'SIMPLE-TYPE-ERROR
>> >> >>>>>>>> ;          :FORMAT-CONTROL "Invalid argument to SLEEP: ~S.~%~
>> >> >>>>>>>> ;             Must be a non-negative, non-complex number."
>> >> >>>>>>>> ;          :FORMAT-ARGUMENTS ...)
>> >> >>>>>>>> ; Note: Deleting unreachable code.
>> >> >>>>>>>> ;
>> >> >>>>>>>>
>> >> >>>>>>>> DOUBLE-DOUBLE-FLOAT fell through ECASE expression.
>> >> >>>>>>>> Wanted one of (REAL FLOAT OR SINGLE-FLOAT DOUBLE-FLOAT
>> >> >>>>>>>> RATIONAL
>> >> >>>>>>>> INTEGER).
>> >> >>>>>>>>
>> >> >>>>>>>> it's very strange... I disabled double-double... why I have
>> >> >>>>>>>> this
>> >> >>>>>>>> error ?
>> >> >>>>>>>
>> >> >>>>>>>
>> >> >>>>>>> I think it's a mismatch between what the cross compiler has and
>> >> >>>>>>> what the
>> >> >>>>>>> host compiler has. I've never figured this out.
>> >> >>>>>>>
>> >> >>>>>>> So, I think it's best to start with a lisp without
>> >> >>>>>>> double-double
>> >> >>>>>>> support.
>> >> >>>>>>>
>> >> >>>>>>> Support for double-double was apparently done by 19e, so your
>> >> >>>>>>> best
>> >> >>>>>>> bet is to
>> >> >>>>>>> do a checkout from 19d.  I think everything that you've done up
>> >> >>>>>>> to
>> >> >>>>>>> now still
>> >> >>>>>>> applies.
>> >> >>>>>>>
>> >> >>>>>>> Once that is done, we can consider adding double-double for
>> >> >>>>>>> alpha.
>> >> >>>>>>> It's
>> >> >>>>>>> relatively easy, but you'll have to write a bunch of vops. They
>> >> >>>>>>> can probably
>> >> >>>>>>> be copied almost verbatim from the sparc or ppc ports with
>> >> >>>>>>> small
>> >> >>>>>>> changes in
>> >> >>>>>>> the actual instructions.
>> >> >>>>>>>
>> >> >>>>>>>>
>> >> >>>>>>>> This is my features list in cross.lisp (I removed
>> >> >>>>>>>> extern-alien-name,
>> >> >>>>>>>> fixup, etc... I don't know what they are doing... so maybe I
>> >> >>>>>>>> can
>> >> >>>>>>>> put
>> >> >>>>>>>> back later)
>> >> >>>>>>>>
>> >> >>>>>>>> ;;; Cross-compile script to build a alpha core using x86 as
>> >> >>>>>>>> the
>> >> >>>>>>>> ;;; compiling system.  This needs work!
>> >> >>>>>>>>
>> >> >>>>>>>> (in-package :cl-user)
>> >> >>>>>>>>
>> >> >>>>>>>> ;;; Rename the X86 package and backend so that new-backend
>> >> >>>>>>>> does
>> >> >>>>>>>> the
>> >> >>>>>>>> ;;; right thing.
>> >> >>>>>>>> (rename-package "X86" "OLD-X86" '("OLD-VM"))
>> >> >>>>>>>> (setf (c:backend-name c:*native-backend*) "OLD-X86")
>> >> >>>>>>>>
>> >> >>>>>>>> (c::new-backend "ALPHA"
>> >> >>>>>>>>    ;; Features to add here
>> >> >>>>>>>>    '(:alpha
>> >> >>>>>>>>      :relative-package-names            ; Relative package
>> >> >>>>>>>> names
>> >> >>>>>>>> from
>> >> >>>>>>>> Allegro
>> >> >>>>>>>>      :conservative-float-type
>> >> >>>>>>>>      :hash-new
>> >> >>>>>>>>      :random-mt19937                    ; MT-19937 generator
>> >> >>>>>>>>      :cmu                               ; Announce this is
>> >> >>>>>>>> CMUCL
>> >> >>>>>>>>      :cmu20 :cmu20b                     ; Current version
>> >> >>>>>>>> identifier
>> >> >>>>>>>>      :osf1
>> >> >>>>>>>>      :bsd
>> >> >>>>>>>>      :unix
>> >> >>>>>>>>      )
>> >> >>>>>>>>    ;; Features to remove from current *features* here
>> >> >>>>>>>>    '(:sparc-v8 :sparc-v7 :sparc-v9 :sparc
>> >> >>>>>>>>      ;; Other architectures we aren't using.  Particularly
>> >> >>>>>>>> important
>> >> >>>>>>>>      ;; to get rid of sse2 and x87 so we don't accidentally
>> >> >>>>>>>> try
>> >> >>>>>>>> to
>> >> >>>>>>>>      ;; compile the x87/sse2 float support on sparc, which
>> >> >>>>>>>> won't
>> >> >>>>>>>> work.
>> >> >>>>>>>>      :x86 :x86-bootstrap :sse2 :x87 :i486
>> >> >>>>>>>>      :mips :complex-fp-vops
>> >> >>>>>>>>      ;; Really old stuff that should have been removed long
>> >> >>>>>>>> ago.
>> >> >>>>>>>>      :propagate-fun-type :propagate-float-type
>> >> >>>>>>>> :constrain-float-type
>> >> >>>>>>>>      :double-double
>> >> >>>>>>>>      :linkage-table
>> >> >>>>>>>>      :stack-checking                    ; Throw error if we
>> >> >>>>>>>> run
>> >> >>>>>>>> out of
>> >> >>>>>>>> stack
>> >> >>>>>>>>      :heap-overflow-check               ; Throw error if we
>> >> >>>>>>>> run
>> >> >>>>>>>> out of
>> >> >>>>>>>>                                         ; heap (This requires
>> >> >>>>>>>> gencgc!)
>> >> >>>>>>>>      :gencgc                            ; Generational GC
>> >> >>>>>>>>      :modular-arith                     ; Modular arithmetic
>> >> >>>>>>>>      :executable
>> >> >>>>>>>>      ;; Other OSes were not using
>> >> >>>>>>>>      :openbsd :freebsd :glibc2 :linux :mach-o :darwin :sunos
>> >> >>>>>>>> :svr4
>> >> >>>>>>>>      :solaris :sun4
>> >> >>>>>>>>      :pentium
>> >> >>>>>>>>      :long-float
>> >> >>>>>>>>      :new-random
>> >> >>>>>>>>      :small
>> >> >>>>>>>>      :mp))
>> >> >>>>>>>
>> >> >>>>>>>
>> >> >>>>>>> One last thing:  remove :alien-callback too. Alpha doesn't
>> >> >>>>>>> support
>> >> >>>>>>> that.
>> >> >>>>>>>
>> >> >>>>>>> Hopefully this will get us farther along....
>> >> >>>>>>>
>> >> >>>>>>> --
>> >> >>>>>>> Ray
>> >> >>>>>>>
>> >> >>>>>>>
>> >
>> >
>
>
_______________________________________________
cmucl-help mailing list
[email protected]
http://lists.zs64.net/mailman/listinfo/cmucl-help