Re: Bigloo with Windows 10 Linux Services and Bash

Hello, Laurent,
From the logs, you are attempting to compile Pp.scm in the runtime directory. That should already be bootstrapped as Pp.c. Have you tried the build with freshly unarchived version of the source. I have seemed similar issues with compiling when I have a non-pristine version of the source. 

You may also want to try running a pre-compiled ubuntu version of bigloo on windows. From what I understand, the new linux subsystem is supposed to run linux binaries unmodified. 

Best Regards,Joe

 
      From: Laurent Bloch <[email protected]>
 To: Joseph Donaldson <[email protected]> 
Cc: Bigloo <[email protected]>; [email protected]
 Sent: Wednesday, July 13, 2016 4:49 AM
 Subject: Re: [bigloo] Bigloo with Windows 10 Linux Services and Bash
  
Hello Joseph,

Le mardi 12 juillet 2016 Joseph Donaldson a écrit ceci :

> Hello, Laurent,
> If you provide a log of the build, we might be able to provide greater assistance.
> Best Regards,Joe

Thanks again. Here it is.

Best regards!
 
>      From: Laurent Bloch <[email protected]>
>  To: [email protected] 
>  Sent: Monday, July 11, 2016 3:17 PM
>  Subject: Re: [bigloo] Bigloo with Windows 10 Linux Services and Bash
>    
>  Hello Joseph, Thank you for your answer. Maybe Phidget is not the culprit, nevertheless the installation fails, Bigloo is not built. Well, I'll continue with investigations. Greetings!
>  
>  Le 11/07/2016 à 23:50, Joseph Donaldson a écrit :
>  
>  Hello, Laurent, 
>  Phidgets is a library for connecting and using various sensors and controls via usb. The site for the library is Phidgets Inc. - Unique and Easy to Use USB Interfaces. The fact that phidgets  autoconf failed to configure should not prevent you from building bigloo. You can safely ignore the error. 
>  Best Regards, Joe
>  
>    
> |  
> |  
> |  
> |  
>  |  
>  |
> 
>  |
> 
>  |
> |  
> |  
>  |  
> Phidgets Inc. - Unique and Easy to Use USB Interfaces
>  |  
>  |
> 
>  |
> 
>  |
> 
>  
>    
>  
>    
>      From: Laurent Bloch <[email protected]>
>  To: Bigloo Inria list <[email protected]> 
>  Cc: [email protected]
>  Sent: Monday, July 11, 2016 7:07 AM
>  Subject: [bigloo] Bigloo with Windows 10 Linux Services and Bash
>  
>  Hi,
>  
>  I'm trying to install Bigloo with Windows 10 Linux Services and Bash.
>  
>  Windows 10 Bash shell is neither a VM nor a container, but a Windows subsystem with Ubuntu 14-04 LTS built in. In a PowerShell window you may launch the command bash and thereafter use all the usual Linux commands, wget, apt-get, make, etc.
>  
>  The Bigloo install Makefile fails by not building the bigloo executable binary. I've tried with different Bigloo versions, 4.2c, 4.1a-2, 3.9a. As an attachment: configure.log for 3.9a, but the result is the same for all versions, with a configuration failure due to the lack of phidget:
>  
>  ./autoconf/runtest -v1 -- phidget "--cflags=" "--version=21"
>  /tmp/actestlbloch.c:1:23: fatal error: phidget21.h: Aucun fichier ou dossier de ce type
>  #include <phidget21.h>
>  
>  I've never heard of phidget neither I've found it on my computers with Bigloo up and running.
>  
>  Has anybody an hint?
>  
>  Cheers!
>  
>  -- 
>  Laurent Bloch - http://www.laurentbloch.org - [email protected]
>  Si vous trouvez que l'éducation coûte cher, essayez l'ignorance !
>  (A. Lincoln)
>  
>    
>    
>  
>  
> 
>    


-- 
Laurent Bloch - http://www.laurentbloch.org - [email protected]
Si vous trouvez que l'éducation coûte cher, essayez l'ignorance !
(A. Lincoln)