| Newsgroups |
gmane.mail.blat |
| Organization |
Samaan Systems Ltd. |
| Message-ID |
<[email protected]> |
Thanks Skand,
yes, I had switched the port in my blat command. It is working now that
I added the following settings to stunnel.conf:
RNDfile = .rnd
sslVersion = TLSv1
fips = no
On 11/05/2015 02:30 AM, 'Skand Bhargava' [email protected] [blat] wrote:
>
> Switching from 25 to 1099 will need to be done in blat also - just in
> case you overlooked that...
> Hopefully you also mentioned the IP address at which stunnel would be
> listening (blat's SMTP).
> Your blat command, if you post here, will definitely be more helpful
> to understand what's going on.
> Skand
> -----Original Message-----
> *From:* [email protected] [mailto:[email protected]]
> *Sent:* Monday, May 11, 2015 2:50 AM
> *To:* [email protected]
> *Subject:* RE: [blat] Blat and stunnel: SSL_accept: Peer suddenly
> disconnected
>
> Thanks, I have tried 465 as well as 587, neither worked. I also
> switched from port 25 to 1099 and still the same problem :(
>
>
> My next step is to see if I can use wireshark to see what is
> happening.
>
>
--
Frank.
Frank Cazabon