| Newsgroups |
gmane.mail.blat |
| Message-ID |
<[email protected]> |
If 25, why bother with stunnel?
Mike Mattos
“Confidence is what you have before you understand the problem.”
Woody Allen <http://www.goodreads.com/author/show/10356.Woody_Allen>
From: [email protected] [mailto:[email protected]]
Sent: May-11-15 14:18
To: [email protected]
Subject: Re: [blat] Blat and stunnel: SSL_accept: Peer suddenly disconnected
On 11/05/2015 10:35 AM, 'Skand Bhargava' [email protected] [blat] wrote:
I think it is listening on port 587, not 25..
Do you mean their smtp server is listening on 587?
They are pretty sure that it is 25. That is how they have their Outlook set up.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, May 11, 2015 5:27 PM
To: [email protected]
Subject: Re: [blat] Blat and stunnel: SSL_accept: Peer suddenly disconnected
I'm now trying this at my client site and getting this displayed:
2015.05.11 09:35:37 LOG6[main]: Initializing service [smtp]
2015.05.11 09:35:37 LOG5[main]: Configuration successful
2015.05.11 09:35:59 LOG5[3]: Service [smtp] accepted connection from 127.0.0.1:2852
2015.05.11 09:35:59 LOG6[3]: Failover strategy: round-robin
2015.05.11 09:35:59 LOG6[3]: s_connect: connecting 172.16.9.6:25
2015.05.11 09:35:59 LOG5[3]: s_connect: connected 172.16.9.6:25
2015.05.11 09:35:59 LOG5[3]: Service [smtp] connected remote server from 10.187.11.65:2853
2015.05.11 09:35:59 LOG6[3]: SNI: sending servername: axigen.republictt.com
2015.05.11 09:35:59 LOG3[3]: SSL_connect: 140770FC: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
2015.05.11 09:35:59 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
This is the stunnel.conf file:
debug = info
output = stunnel.log
RNDfile = .rnd
sslVersion = all
fips = no
[smtp]
client = yes
accept = 127.0.0.1:27
connect = axigen.********.com:25
;verify = 2
;CAfile = ca-certs.pem
;checkHost = smtp.gmail.com
Can anyone tell me what to do to fix this?
On 11/05/2015 07:25 AM, Frank Cazabon wrote:
Thanks Chip.
Once I used your settings but removed the CAfile and cert entries, it worked!
Now I need to see if I can get this working at a client site with their own secured smtp server.
On 10/05/2015 08:55 PM, 'Chip' [email protected] [blat] wrote:
> Frank,
>
> Take a look at the example page, http://www.blat.net/examples/, at the
> bottom is Chip’s configuration file. It may have some clues that will
> help.
>
> Cheers,
>
> Doug
Frank,
Here is my stunnel.conf file that works with Gmail. Please take note of the
first section, and the last section.
Chip
CAfile = cert.pem
cert = client.pem
client = yes
RNDfile = .rnd
sslVersion = TLSv1
fips = no
[att yahoo smtp]
accept = 25
connect = outbound.att.net:465
[att yahoo pop3]
accept = 110
connect = inbound.att.net:995
[hotmail smtp]
accept = 8002
connect = smtp.live.com:587
protocol = smtp
[hotmail pop3]
accept = 9002
connect = pop3.live.com:995
[gmail smtp]
accept = 27
connect = smtp.gmail.com:587
protocol = smtp
--
Frank.
Frank Cazabon
--
Frank.
Frank Cazabon
--
Frank.
Frank Cazabon
[Non-text portions of this message have been removed]