| Newsgroups |
gmane.mail.blat |
| Message-ID |
<[email protected]> |
OK, thanks. As you can see I know nothing about this kind of stuff. The error I got from blat when I tried it without stunnel made me think I needed SSL. I didn't know specific ports were for specific types.
I'll try it again without s tunnel and come back here with the error I get.
On 11 May 2015 19:18:17 GMT-04:00, "'Mike Mattos' [email protected] [blat]" <[email protected]> wrote:
>No, because port 25 is used for unsecured email, and rarely used any
>more. SMTP using SSL is typically on port 465
>
>
>
>Stunnel is a wrapper that handles SSL , you give stunnel a local ip and
>port , usually 127.0.0.1 plus a high port not in use, like
>127.0.0.1:2025
>
>
>
>And point it to smtp.my_service_provider.com:465
>
>
>
>Blat in installed as blat 127.0.0.1:2025 which means blat connects to
>stunnel, and stunnel relays using SSL. But you do have to provide the
>user and password info for my_service_provider
>
>
>
>Mike
>
>
>
>
>
>From: [email protected] [mailto:[email protected]]
>Sent: May-11-15 18:31
>To: [email protected]
>Subject: RE: [blat] Blat and stunnel: SSL_accept: Peer suddenly
>disconnected
>
>
>
>
>
>Because it requires SSL, so don't I need to use stunnel for that?
>
>On 11 May 2015 17:13:50 GMT-04:00, "'Mike Mattos' [email protected]
>[blat]" <[email protected]> wrote:
>
>
>
>If 25, why bother with stunnel?
>
>Mike Mattos
>
>“Confidence is what you have before you understand the problem.”
>
>Woody Allen <http://www.goodreads.com/author/show/10356.Woody_Allen>
>
>From: [email protected] [mailto:[email protected]]
>Sent: May-11-15 14:18
>To: [email protected]
>Subject: Re: [blat] Blat and stunnel: SSL_accept: Peer suddenly
>disconnected
>
>On 11/05/2015 10:35 AM, 'Skand Bhargava' [email protected] [blat]
>wrote:
>
>I think it is listening on port 587, not 25..
>
>Do you mean their smtp server is listening on 587?
>
>They are pretty sure that it is 25. That is how they have their Outlook
>set up.
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]]
>Sent: Monday, May 11, 2015 5:27 PM
>To: [email protected]
>Subject: Re: [blat] Blat and stunnel: SSL_accept: Peer suddenly
>disconnected
>
>I'm now trying this at my client site and getting this displayed:
>
>2015.05.11 09:35:37 LOG6[main]: Initializing service [smtp]
>2015.05.11 09:35:37 LOG5[main]: Configuration successful
>2015.05.11 09:35:59 LOG5[3]: Service [smtp] accepted connection from
>127.0.0.1:2852
>2015.05.11 09:35:59 LOG6[3]: Failover strategy: round-robin
>2015.05.11 09:35:59 LOG6[3]: s_connect: connecting 172.16.9.6:25
>2015.05.11 09:35:59 LOG5[3]: s_connect: connected 172.16.9.6:25
>2015.05.11 09:35:59 LOG5[3]: Service [smtp] connected remote server
>from 10.187.11.65:2853
>2015.05.11 09:35:59 LOG6[3]: SNI: sending servername:
>axigen.republictt.com
>2015.05.11 09:35:59 LOG3[3]: SSL_connect: 140770FC: error:140770FC:SSL
>routines:SSL23_GET_SERVER_HELLO:unknown protocol
>2015.05.11 09:35:59 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0
>byte(s) sent to socket
>
>This is the stunnel.conf file:
>
>debug = info
>output = stunnel.log
>
>RNDfile = .rnd
>sslVersion = all
>fips = no
>
>[smtp]
>client = yes
>accept = 127.0.0.1:27
>connect = axigen.********.com:25
>;verify = 2
>;CAfile = ca-certs.pem
>;checkHost = smtp.gmail.com
>
>Can anyone tell me what to do to fix this?
>
>On 11/05/2015 07:25 AM, Frank Cazabon wrote:
>
>Thanks Chip.
>
>Once I used your settings but removed the CAfile and cert entries, it
>worked!
>
>Now I need to see if I can get this working at a client site with their
>own secured smtp server.
>
>On 10/05/2015 08:55 PM, 'Chip' [email protected] [blat] wrote:
>
>> Frank,
>>
>> Take a look at the example page, http://www.blat.net/examples/, at
>the
>> bottom is Chip’s configuration file. It may have some clues that will
>
>> help.
>>
>> Cheers,
>>
>> Doug
>
>Frank,
>
>Here is my stunnel.conf file that works with Gmail. Please take note of
>the
>first section, and the last section.
>
>Chip
>
>CAfile = cert.pem
>cert = client.pem
>client = yes
>RNDfile = .rnd
>sslVersion = TLSv1
>fips = no
>
>[att yahoo smtp]
>accept = 25
>connect = outbound.att.net:465
>
>[att yahoo pop3]
>accept = 110
>connect = inbound.att.net:995
>
>[hotmail smtp]
>accept = 8002
>connect = smtp.live.com:587
>protocol = smtp
>
>[hotmail pop3]
>accept = 9002
>connect = pop3.live.com:995
>
>[gmail smtp]
>accept = 27
>connect = smtp.gmail.com:587
>protocol = smtp
>
>
>--
>Frank Cazabon
>
>Sent from my phone. Please excuse my brevity.
>
>
>
>
>
>[Non-text portions of this message have been removed]
--
Frank Cazabon
Sent from my phone. Please excuse my brevity.