Re: Multi-thread cyrus delayed forking of imapd processes after connecting to master listener

A few corrections of typos..


On 05/19/2017 05:48 PM, Michael Hieb wrote:
> Apologies for long post, most of it is configuration details.
>
> I have recently changed from a single threaded cyrus server in which 
> multiple domains were overloaded on one listener as multiple virtual 
> domains to a multiple threaded cyrus server in which multiple domains 
> are listened for on separate ip addresses with separate 
> configurations. The primary motivation was to have separate tls 
> certificates for each domain. The problem is that I can connect to 
> cyrus listener on all ip/ports for all domains, but while one of them 
> will fork immediately and respond with a banner, the others will delay 
> for a period of time from a few seconds to a minute or so before 
> forking and responding with a banner. With the same setup, I change to 
> a single threaded cyrus server to listen on all ip/ports then I get an 
> immediate response on all, but of course I do not get the separate tls 
> certificate or configuration. It is replicable that switching between 
> the single threaded and multiple threaded configuration triggers the 
> problem. I have searched the logs and the mail-lists and found nothing 
> that seems related.
>
> Question: why does switching to multiple threaded cyrus server trigger 
> delayed forking of imapd processes after connecting to master listener?
>
> On listener which responds immediately (as expected) I get this:
>
> user@somehost:~> telnet imap.domain1.com 143
> Trying 192.168.110.171...
> Connected to imap.domain1.com.
> Escape character is '^]'.
> * OK [CAPABILITY IMAP4rev1 LITERAL+ ID ENABLE STARTTLS AUTH=GSS-SPNEGO 
> AUTH=GSSAPI AUTH=DIGEST-MD5 AUTH=CRAM-MD5 AUTH=LOGIN AUTH=PLAIN 
> SASL-IR] imap.domain1.com Cyrus IMAP v2.4.18 server ready
>
> On listener with delay, I get this (and process hangs for many seconds 
> or even a minute or two):
>
> user@somehost:~> telnet imap.domain2.com 143
> Trying 192.168.110.172...
> Connected to imap.domain2.com.
> Escape character is '^]'.
>
> The domain for which the listener responds and the one for which it 
> delays seems to change and be random as far as I can tell.
>
> There is nothing in the log journal that looks different from when we 
> connect and get a for and when we connect and get a delay.
>
> May 19 09:44:31 MAILSERVER master[13762]: about to exec 
> /usr/lib/cyrus/bin/imapd
> May 19 09:44:31 MAILSERVER imap[13762]: executed
> May 19 09:44:31 MAILSERVER imap[13762]: IOERROR: opening 
> /var/lib/imap/user_deny.db: No such file or directory
>
> and once imapd forks and banner is generated
>
> May 19 09:46:45 MAILSERVER imap[13762]: accepted connection
>
> Here are the configuration details:
>
> I run cyrus 2.4.18-3.6 on openSuSE Leap 42.2 Linux MAILSERVER 
> 4.4.62-18.6-default #1 SMP Fri Apr 21 16:14:48 UTC 2017 (84f9824) 
> x86_64 x86_64 x86_64 GNU/Linux.
>
> Here is my (sanitized) cyrus.conf and one imapd.conf (they all look 
> alike except for certificate and domain specifics).
>
> MAILSERVER:~ # cat /etc/cyrus.conf
> START {
> # do not delete this entry!
> recover cmd="ctl_cyrusdb -r"
>
> # this is only necessary if using idled for IMAP IDLE
> idled cmd="idled"
> }
>
> # UNIX sockets start with a slash and are put into /var/lib/imap/socket
> SERVICES {
> # add or remove based on preferences
> #imap cmd="imapd" listen="imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain1.com.conf " 
> listen="192.168.171.4:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain1.com.conf " 
> listen="192.168.110.171:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain2.com.conf " 
> listen="192.168.172.4:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain2.com.conf " 
> listen="192.168.110.172:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain3.com.conf " 
> listen="192.168.174.4:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain3.com.conf " 
> listen="192.168.110.174:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain4.com.conf " 
> listen="192.168.175.4:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain4.com.conf " 
> listen="192.168.110.175:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain5.com.conf " 
> listen="192.168.176.4:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain5.com.conf " 
> listen="192.168.110.176:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain6.com.conf " 
> listen="192.168.177.4:imap" maxchild=-1 maxforkrate=100
> imap cmd="imapd -C /etc/imapd.domain6.com.conf " 
> listen="192.168.110.177:imap" maxchild=-1 maxforkrate=100
>
> #imaps cmd="imapd -s" listen="imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain1.com.conf -s " 
> listen="192.168.171.4:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain1.com.conf -s " 
> listen="192.168.110.171:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain2.com.conf -s " 
> listen="192.168.172.4:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain2.com.conf -s " 
> listen="192.168.110.172:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain3.com.conf -s " 
> listen="192.168.174.4:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain3.com.conf -s " 
> listen="192.168.110.174:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain4.com.conf -s " 
> listen="192.168.175.4:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain4.com.conf -s " 
> listen="192.168.110.175:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain5.com.conf -s " 
> listen="192.168.176.4:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain5.com.conf -s " 
> listen="192.168.110.176:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain6.com.conf -s " 
> listen="192.168.177.4:imaps" maxchild=-1 maxforkrate=100
> imaps cmd="imapd -C /etc/imapd.domain6.com.conf -s " 
> listen="192.168.110.177:imaps" maxchild=-1 maxforkrate=100
>
> #pop3 cmd="pop3d" listen="pop3"
> #pop3s cmd="pop3d -s" listen="pop3s"
> #sieve cmd="timsieved" listen="sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain1.com.conf" 
> listen="192.168.171.4:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain1.com.conf" 
> listen="192.168.110.171:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain2.com.conf" 
> listen="192.168.172.4:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain2.com.conf" 
> listen="192.168.110.172:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain3.com.conf" 
> listen="192.168.174.4:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain3.com.conf" 
> listen="192.168.110.174:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain4.com.conf" 
> listen="192.168.175.4:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain4.com.conf" 
> listen="192.168.110.175:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain5.com.conf" 
> listen="192.168.176.4:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain5.com.conf" 
> listen="192.168.110.176:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain6.com.conf" 
> listen="192.168.177.4:sieve" maxchild=-1 maxforkrate=100
> sieve cmd="timsieved -C /etc/imapd.domain6.com.conf" 
> listen="192.168.110.177:sieve" maxchild=-1 maxforkrate=100
>
> #ptloader cmd="ptloader" listen="/var/lib/imap/ptclient/ptsock"
>
> # at least one LMTP is required for delivery
> lmtp cmd="lmtpd -a" listen="mail.domain1.com:lmtp" maxchild=-1 
> maxforkrate=100
> lmtp cmd="lmtpd -a" listen="mail.domain2.com:lmtp" maxchild=-1 
> maxforkrate=100
> lmtp cmd="lmtpd -a" listen="mail.domain3.com:lmtp" maxchild=-1 
> maxforkrate=100
> lmtp cmd="lmtpd -a" listen="mail.domain4.com:lmtp" maxchild=-1 
> maxforkrate=100
> lmtp cmd="lmtpd -a" listen="mail.domain5.com:lmtp" maxchild=-1 
> maxforkrate=100
> lmtp cmd="lmtpd -a" listen="mail.domain6.com:lmtp" maxchild=-1 
> maxforkrate=100
> #lmtpunix cmd="lmtpd" listen="/var/lib/imap/socket/lmtp"
>
> # this is only necessary if using notifications
> #notify cmd="notifyd" listen="/var/lib/imap/socket/notify" proto="udp"
> }
>
> EVENTS {
> # this is required
> checkpoint cmd="ctl_cyrusdb -c" period=30
>
> # this is only necessary if using duplicate delivery suppression,
> # Sieve or NNTP
> duplicateprune cmd="cyr_expire -E 3" at=0400
>
> # Expire data older then 69 days. Two full months of 31 days
> # each includes two full backup cycles, plus 1 week margin
> # because we run our full backups on the first sat/sun night
> # of each month.
> deleteprune cmd="cyr_expire -E 4 -D 69" at=0430
> expungeprune cmd="cyr_expire -E 4 -X 69" at=0445
>
> # this is only necessary if caching TLS sessions
> tlsprune cmd="tls_prune" at=0400
>
> # Uncomment the next entry, if you want to automatically remove
> # old messages of EVERY user.
> # This example calls ipurge every 60 minutes and ipurge will delete
> # ALL messages older then 120 days.
> # enter 'man 8 ipurge' for more details
> #cleanup cmd="ipurge -d 120 -f" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain1.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain2.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain3.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain4.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain5.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain6.com" period=60
>
> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain1.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain2.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain3.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain4.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain5.com" period=60
> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain6.com" period=60
>
> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain1.com" period=60
> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain2.com" period=60
> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain3.com" period=60
> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain4.com" period=60
> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain5.com" period=60
> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain6.com" period=60
>
> # Create search indexes regularly
> squatter cmd="squatter -s -i" at=0530
>
> # running sa-learn
> sa-learn cmd="/usr/local/bin/cyrus-salearn.pl" period=60
> sa-update cmd="/usr/bin/sa-update -v" at=0000
>
> }
>
> MAILSERVER:~ # cat /etc/imapd.domain1.com.conf
> configdirectory: /var/lib/imap
> partition-default: /var/spool/imap
> sievedir: /var/lib/sieve
> annotation_definitions: /etc/imapd.annotations.conf
> # admins: [email protected]
> allowanonymouslogin: no
> autocreatequota: 10000
> reject8bit: no
> quotawarn: 90
> timeout: 30
> poptimeout: 10
> dracinterval: 0
> drachost: localhost
> sasl_pwcheck_method: saslauthd
> lmtp_overquota_perm_failure: no
> #lmtp_catchall_mailbox: admin
> lmtp_downcase_rcpt: yes
> lmtp_fuzzy_mailbox_match: yes
> expunge_mode: delayed
> deletedprefix: DELETED
> delete_mode: delayed
>
> # added by Michael Hieb Jun 22 2014
> allowplaintext: yes
> unixhierarchysep: yes
> allowplainwithouttls: no
> altnamespace: no
> virtdomains: userid
> servername: imap.domain1.net
>
> #
> # if you want TLS, you have to generate certificates and keys
> #
> tls_cert_file: /etc/letsencrypt/live/imap.domain1.net/cert.pem
> tls_key_file: /etc/letsencrypt/live/imap.domain1.net/privkey.pem
> tls_ca_file: /etc/letsencrypt/live/imap.domain1.net/chain.pem
> tls_ca_path: /etc/ssl/certs
> tls_versions: tls1_0 tls1_1 tls1_2
>
> # added by Michael Hieb 20-Jan-2017 for lmtp on port (not socket)
> lmtp_admins: lmtpuser
> MAILSERVER:~ #
>
> Note: before I discovered the problem with forking could be triggered 
> by switching between single threaded and multi-threaded cyrus server, 
> I thought problem could be related to resource constraints. This is 
> why I set all processes with maxchild=-1 maxforkrate=100. I also set 
> the following in /etc/systemd/system/cyrus.service
>
> MAILSERVER:~ # cat /etc/systemd/system/cyrus.service
> [deleted...]
> LimitRTPRIO=50000
> LimitNOFILE=50000
> LimitNPROC=50000
> MAILSERVER:~ #
>
> None of these resource settings made any difference and the problem 
> goes away as soon as cyrus is single threaded - so I do not believe it 
> is a resource constraint (at least one I understand at this point).
>
> Any help would be much appreciated.
>
>
>

----
Cyrus Home Page: http://www.cyrusimap.org/
List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
To Unsubscribe:
https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus