Re: Multi-thread cyrus delayed forking of imapd processes after connecting to master listener
Michael Hieb <[email protected]>
| Newsgroups | gmane.mail.imap.cyrus |
|---|---|
| Message-ID | <[email protected]> |
I am not sure I got the strace setup in /etc/cyrus correct. I setup new
virtual interface 192.168.110.180 added the following line to /etc/cyrus:
imap cmd="/usr/bin/strace -q -v -s200 -f -F -o
/tmp/cyrus.strace.txt /full/path/to/imapd -C
/etc/imapd.domain2.com.conf" listen="192.168.110.180:imap" maxchild=-1
maxforkrate=100
I restarted cyrus.service, with no errors and tried to connect as follows:
michael.hieb@sombra:~> telnet 192.168.110.180 143
Trying 192.168.110.180...
Connected to 192.168.110.180.
Escape character is '^]'.
And received hundreds of errors in journal as follows:
May 24 04:18:59 MAILSERVER master[8978]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8978 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8980]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8980 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8982]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8982 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8984]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8984 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8986]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8986 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8988]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8988 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8990]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8990 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8992]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8992 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8994]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8994 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8996]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8996 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8998]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 8998 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[9000]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 9000 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 9002 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[9004]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 9004 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[9006]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 9006 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[9008]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 9008 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[9010]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 9010 in READY
state: terminated abnormally
May 24 04:18:59 MAILSERVER master[9012]: about to exec /usr/bin/strace
May 24 04:18:59 MAILSERVER master[8366]: service imap pid 9012 in READY
state: terminated abnormally
I removed the line and tried your suggestion to give each service a
unique name as follows (apologies for missing this in documentation):
SERVICES {
# add or remove based on preferences
#imap cmd="imapd" listen="imap" maxchild=-1
maxforkrate=100
imap.domain1.com.external cmd="imapd -C
/etc/imapd.domain1.com.conf " listen="192.168.171.4:imap" maxchild=-1
maxforkrate=100
imap.domain1.com.internal cmd="imapd -C
/etc/imapd.domain1.com.conf " listen="192.168.110.171:imap" maxchild=-1
maxforkrate=100
imap.domain2.com.external cmd="imapd -C
/etc/imapd.domain2.com.conf " listen="192.168.172.4:imap" maxchild=-1
maxforkrate=100
imap.domain2.com.internal cmd="imapd -C
/etc/imapd.domain2.com.conf " listen="192.168.110.172:imap" maxchild=-1
maxforkrate=100
imap.domain3.com.external cmd="imapd -C
/etc/imapd.domain3.com.conf " listen="192.168.174.4:imap" maxchild=-1
maxforkrate=100
imap.domain3.com.internal cmd="imapd -C
/etc/imapd.domain3.com.conf " listen="192.168.110.174:imap" maxchild=-1
maxforkrate=100
imap.domain4.com.external cmd="imapd -C
/etc/imapd.domain4.com.conf " listen="192.168.175.4:imap" maxchild=-1
maxforkrate=100
imap.domain4.com.internal cmd="imapd -C
/etc/imapd.domain4.com.conf " listen="192.168.110.175:imap" maxchild=-1
maxforkrate=100
imap.domain5.com.external cmd="imapd -C
/etc/imapd.domain5.com.conf " listen="192.168.176.4:imap" maxchild=-1
maxforkrate=100
imap.domain5.com.internal cmd="imapd -C
/etc/imapd.domain5.com.conf " listen="192.168.110.176:imap" maxchild=-1
maxforkrate=100
imap.domain6.com.external cmd="imapd -C
/etc/imapd.domain6.com.conf " listen="192.168.177.4:imap" maxchild=-1
maxforkrate=100
imap.domain6.com.internal cmd="imapd -C
/etc/imapd.domain6.com.conf " listen="192.168.110.177:imap" maxchild=-1
maxforkrate=100
#imaps cmd="imapd -s" listen="imaps" maxchild=-1
maxforkrate=100
imaps.domain1.com.external cmd="imapd -C
/etc/imapd.domain1.com.conf -s " listen="192.168.171.4:imaps"
maxchild=-1 maxforkrate=100
imaps.domain1.com.internal cmd="imapd -C
/etc/imapd.domain1.com.conf -s " listen="192.168.110.171:imaps"
maxchild=-1 maxforkrate=100
imaps.domain2.com.external cmd="imapd -C
/etc/imapd.domain2.com.conf -s " listen="192.168.172.4:imaps"
maxchild=-1 maxforkrate=100
imaps.domain2.com.internal cmd="imapd -C
/etc/imapd.domain2.com.conf -s " listen="192.168.110.172:imaps"
maxchild=-1 maxforkrate=100
imaps.domain3.com.external cmd="imapd -C
/etc/imapd.domain3.com.conf -s " listen="192.168.174.4:imaps"
maxchild=-1 maxforkrate=100
imaps.domain3.com.internal cmd="imapd -C
/etc/imapd.domain3.com.conf -s " listen="192.168.110.174:imaps"
maxchild=-1 maxforkrate=100
imaps.domain4.com.external cmd="imapd -C
/etc/imapd.domain4.com.conf -s " listen="192.168.175.4:imaps"
maxchild=-1 maxforkrate=100
imaps.domain4.com.internal cmd="imapd -C
/etc/imapd.domain4.com.conf -s " listen="192.168.110.175:imaps"
maxchild=-1 maxforkrate=100
imaps.domain5.com.external cmd="imapd -C
/etc/imapd.domain5.com.conf -s " listen="192.168.176.4:imaps"
maxchild=-1 maxforkrate=100
imaps.domain5.com.internal cmd="imapd -C
/etc/imapd.domain5.com.conf -s " listen="192.168.110.176:imaps"
maxchild=-1 maxforkrate=100
imaps.domain6.com.external cmd="imapd -C
/etc/imapd.domain6.com.conf -s " listen="192.168.177.4:imaps"
maxchild=-1 maxforkrate=100
imaps.domain6.com.internal cmd="imapd -C
/etc/imapd.domain6.com.conf -s " listen="192.168.110.177:imaps"
maxchild=-1 maxforkrate=100
#pop3 cmd="pop3d" listen="pop3"
#pop3s cmd="pop3d -s" listen="pop3s"
#sieve cmd="timsieved" listen="sieve" maxchild=-1
maxforkrate=100
sieve.domain1.com.external cmd="timsieved -C
/etc/imapd.domain1.com.conf" listen="192.168.171.4:sieve" maxchild=-1
maxforkrate=100
sieve.domain1.com.internal cmd="timsieved -C
/etc/imapd.domain1.com.conf" listen="192.168.110.171:sieve" maxchild=-1
maxforkrate=100
sieve.domain2.com.external cmd="timsieved -C
/etc/imapd.domain2.com.conf" listen="192.168.172.4:sieve" maxchild=-1
maxforkrate=100
sieve.domain2.com.internal cmd="timsieved -C
/etc/imapd.domain2.com.conf" listen="192.168.110.172:sieve" maxchild=-1
maxforkrate=100
sieve.domain3.com.external cmd="timsieved -C
/etc/imapd.domain3.com.conf" listen="192.168.174.4:sieve" maxchild=-1
maxforkrate=100
sieve.domain3.com.internal cmd="timsieved -C
/etc/imapd.domain3.com.conf" listen="192.168.110.174:sieve" maxchild=-1
maxforkrate=100
sieve.domain4.com.external cmd="timsieved -C
/etc/imapd.domain4.com.conf" listen="192.168.175.4:sieve" maxchild=-1
maxforkrate=100
sieve.domain4.com.internal cmd="timsieved -C
/etc/imapd.domain4.com.conf" listen="192.168.110.175:sieve" maxchild=-1
maxforkrate=100
sieve.domain5.com.external cmd="timsieved -C
/etc/imapd.domain5.com.conf" listen="192.168.176.4:sieve" maxchild=-1
maxforkrate=100
sieve.domain5.com.internal cmd="timsieved -C
/etc/imapd.domain5.com.conf" listen="192.168.110.176:sieve" maxchild=-1
maxforkrate=100
sieve.domain6.com.external cmd="timsieved -C
/etc/imapd.domain6.com.conf" listen="192.168.177.4:sieve" maxchild=-1
maxforkrate=100
sieve.domain6.com.internal cmd="timsieved -C
/etc/imapd.domain6.com.conf" listen="192.168.110.177:sieve" maxchild=-1
maxforkrate=100
#ptloader cmd="ptloader"
listen="/var/lib/imap/ptclient/ptsock"
# at least one LMTP is required for delivery
lmtp.domain1.com cmd="lmtpd -a"
listen="mail.domain1.com:lmtp" maxchild=-1 maxforkrate=100
lmtp.domain2.com cmd="lmtpd -a" listen="mail.domain2.com:lmtp"
maxchild=-1 maxforkrate=100
lmtp.domain3.com cmd="lmtpd -a"
listen="mail.domain3.com:lmtp" maxchild=-1 maxforkrate=100
lmtp.domain4.com cmd="lmtpd -a"
listen="mail.domain4.com:lmtp" maxchild=-1 maxforkrate=100
lmtp.domain5.com cmd="lmtpd -a"
listen="mail.domain5.com:lmtp" maxchild=-1 maxforkrate=100
lmtp.domain6.com cmd="lmtpd -a" listen="mail.domain6.com:lmtp"
maxchild=-1 maxforkrate=100
#lmtpunix cmd="lmtpd" listen="/var/lib/imap/socket/lmtp"
# this is only necessary if using notifications
#notify cmd="notifyd"
listen="/var/lib/imap/socket/notify" proto="udp"
}
This made no difference, problem persisted after restart of cyrus.service
Michael
On 05/24/2017 01:14 AM, Patrick Boutilier <[email protected]> wrote:
> Date: Tue, 23 May 2017 14:14:41 -0300
> From: Patrick Boutilier <[email protected]>
> To: [email protected]
> Subject: Re: Multi-thread cyrus delayed forking of imapd processes
> after connecting to master listener
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> I have done something like this before, define the command in
> /etc/cyrus.conf as the strace command. Define it on a test IP so you are
> the only one hitting it. Something like:
>
> imap cmd="/usr/bin/strace -q -v -s200 -f -F -o /home/cyrus/pop3
> /full/path/to/imapd -C /etc/imapd.domain4.com.conf "
> listen="192.168.110.175:imap" maxchild=-1 maxforkrate=100
>
> Also just noticed that in your cyrus.conf file the SERVICES names are
> not unique. They all are named imap, imaps, sieve, or lmtp. Not sure
> about 2.4.18 but in the 3.0.1 man page it says "In the SERVICES section,
> names must be unique." Wouldn't hurt naming them different to see if
> that makes a difference.
>
>
>
>
> On 05/23/2017 11:38 AM, Michael Ulitskiy wrote:
>> you can use 'strace -p <pid>', specifying the pid of process you want to
>> trace. you will have to "catch" the process that blocks. it may not be easy,
>> but I have no other suggestions.
>>
>> On Tuesday, May 23, 2017 06:19:17 PM Michael Hieb wrote:
>>> The SASL is cyrus-sasl 2.1.26-9.5. I believe it does use /dev/urandom.
>>>
>>> I am not sure how to run strace on the process that the Master listener
>>> forks. Here is the strace run on the imapd process at a command prompt
>>> (which is not quite the same as the master listener forking it to a port
>>> where another process is waiting to connect to it).
>>>
>>> MAILSERVER:~ # strace /usr/lib/cyrus/bin/imapd -C
>>> /etc/imapd.domain1.com.conf
>>> execve("/usr/lib/cyrus/bin/imapd", ["/usr/lib/cyrus/bin/imapd", "-C",
>>> "/etc/imapd.domain1.com.conf"], [/* 56 vars */]) = 0
>>> brk(0) = 0x5573deaf5000
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb770c000
>>> access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
>>> directory)
>>> open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
>>> fstat(3, {st_mode=S_IFREG|0644, st_size=80522, ...}) = 0
>>> mmap(NULL, 80522, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fdeb76f8000
>>> close(3) = 0
>>> open("/usr/lib64/libsasl2.so.3", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300N\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=118552, ...}) = 0
>>> mmap(NULL, 2213800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb72d0000
>>> mprotect(0x7fdeb72ec000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb74eb000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b000) = 0x7fdeb74eb000
>>> close(3) = 0
>>> open("/usr/lib64/libkrb5.so.3", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200Y\2\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=855280, ...}) = 0
>>> mmap(NULL, 2951008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb6fff000
>>> mprotect(0x7fdeb70c1000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb72c0000, 65536, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc1000) = 0x7fdeb72c0000
>>> close(3) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f7000
>>> open("/lib64/libcom_err.so.2", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\26\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=14760, ...}) = 0
>>> mmap(NULL, 2109928, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb6dfb000
>>> mprotect(0x7fdeb6dfe000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb6ffd000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fdeb6ffd000
>>> close(3) = 0
>>> open("/lib64/libssl.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0pr\1\0\0\0\0\0"..., 832)
>>> = 832
>>> fstat(3, {st_mode=S_IFREG|0555, st_size=440632, ...}) = 0
>>> mmap(NULL, 2535888, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb6b8f000
>>> mprotect(0x7fdeb6bf0000, 2097152, PROT_NONE) = 0
>>> mmap(0x7fdeb6df0000, 45056, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x61000) = 0x7fdeb6df0000
>>> close(3) = 0
>>> open("/lib64/libcrypto.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\313\6\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0555, st_size=2447744, ...}) = 0
>>> mmap(NULL, 4559184, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb6735000
>>> mprotect(0x7fdeb6962000, 2097152, PROT_NONE) = 0
>>> mmap(0x7fdeb6b62000, 167936, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22d000) = 0x7fdeb6b62000
>>> mmap(0x7fdeb6b8b000, 12624, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fdeb6b8b000
>>> close(3) = 0
>>> open("/usr/lib64/libdb-4.8.so", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@X\2\0\0\0\0\0"..., 832)
>>> = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=1560248, ...}) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f6000
>>> mmap(NULL, 3655304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb63b8000
>>> mprotect(0x7fdeb6530000, 2097152, PROT_NONE) = 0
>>> mmap(0x7fdeb6730000, 20480, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x178000) = 0x7fdeb6730000
>>> close(3) = 0
>>> open("/lib64/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P#\0\0\0\0\0\0"..., 832)
>>> = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=88216, ...}) = 0
>>> mmap(NULL, 2183304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb61a2000
>>> mprotect(0x7fdeb61b7000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb63b6000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7fdeb63b6000
>>> close(3) = 0
>>> open("/lib64/libwrap.so.0", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p8\0\0\0\0\0\0"..., 832)
>>> = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=40952, ...}) = 0
>>> mmap(NULL, 2139520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb5f97000
>>> mprotect(0x7fdeb5fa0000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb619f000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7fdeb619f000
>>> mmap(0x7fdeb61a1000, 1408, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fdeb61a1000
>>> close(3) = 0
>>> open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\10\2\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=1925280, ...}) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f5000
>>> mmap(NULL, 3811872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb5bf4000
>>> mprotect(0x7fdeb5d8e000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb5f8d000, 24576, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x199000) = 0x7fdeb5f8d000
>>> mmap(0x7fdeb5f93000, 14880, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fdeb5f93000
>>> close(3) = 0
>>> open("/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\r\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=18712, ...}) = 0
>>> mmap(NULL, 2109680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb59f0000
>>> mprotect(0x7fdeb59f2000, 2097152, PROT_NONE) = 0
>>> mmap(0x7fdeb5bf2000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fdeb5bf2000
>>> close(3) = 0
>>> open("/usr/lib64/libk5crypto.so.3", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340K\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=191424, ...}) = 0
>>> mmap(NULL, 2290168, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb57c0000
>>> mprotect(0x7fdeb57ed000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb59ec000, 12288, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2c000) = 0x7fdeb59ec000
>>> mmap(0x7fdeb59ef000, 504, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fdeb59ef000
>>> close(3) = 0
>>> open("/usr/lib64/libkrb5support.so.0", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20:\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=52416, ...}) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f4000
>>> mmap(NULL, 2147816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb55b3000
>>> mprotect(0x7fdeb55bf000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb57be000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xb000) = 0x7fdeb57be000
>>> close(3) = 0
>>> open("/lib64/libkeyutils.so.1", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\26\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=14688, ...}) = 0
>>> mmap(NULL, 2109704, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb53af000
>>> mprotect(0x7fdeb53b2000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb55b1000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fdeb55b1000
>>> close(3) = 0
>>> open("/lib64/libresolv.so.2", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\2209\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=97152, ...}) = 0
>>> mmap(NULL, 2189896, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb5198000
>>> mprotect(0x7fdeb51ac000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb53ab000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13000) = 0x7fdeb53ab000
>>> mmap(0x7fdeb53ad000, 6728, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fdeb53ad000
>>> close(3) = 0
>>> open("/lib64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360r\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=135952, ...}) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f3000
>>> mmap(NULL, 2213008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb4f7b000
>>> mprotect(0x7fdeb4f93000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb5192000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7fdeb5192000
>>> mmap(0x7fdeb5194000, 13456, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fdeb5194000
>>> close(3) = 0
>>> open("/lib64/libselinux.so.1", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0ps\0\0\0\0\0\0"..., 832)
>>> = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=147208, ...}) = 0
>>> mmap(NULL, 2251056, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb4d55000
>>> mprotect(0x7fdeb4d78000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb4f77000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7fdeb4f77000
>>> mmap(0x7fdeb4f79000, 6448, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fdeb4f79000
>>> close(3) = 0
>>> open("/usr/lib64/libpcre.so.1", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\30\0\0\0\0\0\0"...,
>>> 832) = 832
>>> fstat(3, {st_mode=S_IFREG|0755, st_size=452976, ...}) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f2000
>>> mmap(NULL, 2548232, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
>>> 0) = 0x7fdeb4ae6000
>>> mprotect(0x7fdeb4b54000, 2093056, PROT_NONE) = 0
>>> mmap(0x7fdeb4d53000, 8192, PROT_READ|PROT_WRITE,
>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6d000) = 0x7fdeb4d53000
>>> close(3) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f1000
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76f0000
>>> mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb76ee000
>>> arch_prctl(ARCH_SET_FS, 0x7fdeb76ee840) = 0
>>> mprotect(0x7fdeb5f8d000, 16384, PROT_READ) = 0
>>> mprotect(0x7fdeb5192000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb4d53000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb5bf2000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb4f77000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb53ab000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb55b1000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb57be000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb59ec000, 8192, PROT_READ) = 0
>>> mprotect(0x7fdeb619f000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb63b6000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb6730000, 8192, PROT_READ) = 0
>>> mprotect(0x7fdeb6b62000, 110592, PROT_READ) = 0
>>> mprotect(0x7fdeb6df0000, 16384, PROT_READ) = 0
>>> mprotect(0x7fdeb6ffd000, 4096, PROT_READ) = 0
>>> mprotect(0x7fdeb72c0000, 53248, PROT_READ) = 0
>>> mprotect(0x7fdeb74eb000, 4096, PROT_READ) = 0
>>> mprotect(0x5573dd954000, 8192, PROT_READ) = 0
>>> mprotect(0x7fdeb770d000, 4096, PROT_READ) = 0
>>> munmap(0x7fdeb76f8000, 80522) = 0
>>> set_tid_address(0x7fdeb76eeb10) = 18042
>>> set_robust_list(0x7fdeb76eeb20, 24) = 0
>>> rt_sigaction(SIGRTMIN, {0x7fdeb4f81d80, [], SA_RESTORER|SA_SIGINFO,
>>> 0x7fdeb4f8bb10}, NULL, 8) = 0
>>> rt_sigaction(SIGRT_1, {0x7fdeb4f81e10, [],
>>> SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7fdeb4f8bb10}, NULL, 8) = 0
>>> rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
>>> getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
>>> statfs("/sys/fs/selinux", 0x7ffe1b4e8b00) = -1 ENOENT (No such file or
>>> directory)
>>> statfs("/selinux", {f_type="EXT2_SUPER_MAGIC", f_bsize=4096,
>>> f_blocks=474903111, f_bfree=452714842, f_bavail=452228240,
>>> f_files=120627200, f_ffree=120300880, f_fsi\
>>> d={352889743, -1913047647}, f_namelen=255, f_frsize=4096}) = 0
>>> brk(0) = 0x5573deaf5000
>>> brk(0x5573deb16000) = 0x5573deb16000
>>> open("/proc/filesystems", O_RDONLY) = 3
>>> fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb770b000
>>> read(3, "nodev\tsysfs\nnodev\trootfs\nnodev\tr"..., 1024) = 297
>>> read(3, "", 1024) = 0
>>> close(3) = 0
>>> munmap(0x7fdeb770b000, 4096) = 0
>>> access("/etc/selinux/config", F_OK) = -1 ENOENT (No such file or
>>> directory)
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3, "\355\207\254Q\253\17d\266\22x\324\257
>>> \236\205H\327b\32\221nzmx\251\216D\257J\362\301\357"..., 60) = 60
>>> close(3) = 0
>>> open("/dev/urandom", O_RDONLY|O_NOCTTY|O_NONBLOCK|O_CLOEXEC) = 3
>>> fstat(3, {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> poll([{fd=3, events=POLLIN}], 1, 10) = 1 ([{fd=3, revents=POLLIN}])
>>> read(3,
>>> "r\324\5\243C\224\n\222d\333\25\25\2738\7\ts\351\3759\265\207&\n\251}\316\20
>>> 5\224v\17\253"..., 1024) = 1024
>>> close(3) = 0
>>> getuid() = 0
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3, "\3323i\236\226J\353\241\201\213\20\30\201b<\371\5\246\234\230",
>>> 20) = 20
>>> close(3) = 0
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "u2V%3\367\276\251\202$\376_\1\365r`N^\5?\303H\330\3173i\335\247]A\222\376".
>>> .., 256) = 256
>>> close(3) = 0
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\333_\2\335]:\7\"\373s]\352\375\305\312t\244.@;\245\345\245^(\262d\350\273[
>>> \327-"..., 216) = 216
>>> close(3) = 0
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3, "\207", 1) = 1
>>> close(3) = 0
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3, "\332", 1) = 1
>>> close(3) = 0
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "\22\335\242$\210`\376\376d\200\215m\213-\0162\r\257\206\335\nY\343\3376/\22
>>> 4\352\360\312\336\360", 32) = 32
>>> close(3) = 0
>>> stat("/dev/urandom", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 9), ...}) = 0
>>> open("/dev/urandom", O_RDONLY|O_CLOEXEC) = 3
>>> read(3,
>>> "U\2\251M\21fm\345\334\215Q1(\253\1M!\270\226\212s&A\263}\351\16\271",
>>> 28) = 28
>>> close(3) = 0
>>> futex(0x7fdeb5bf30a8, FUTEX_WAKE_PRIVATE, 2147483647) = 0
>>> open("/lib64/.libcrypto.so.1.0.0.hmac", O_RDONLY) = -1 ENOENT (No such
>>> file or directory)
>>> open("/proc/sys/crypto/fips_enabled", O_RDONLY) = -1 ENOENT (No such
>>> file or directory)
>>> access("/lib64/.libcrypto.so.1.0.0.hmac", F_OK) = -1 ENOENT (No such
>>> file or directory)
>>> open("/etc/localtime", O_RDONLY|O_CLOEXEC) = 3
>>> fstat(3, {st_mode=S_IFREG|0644, st_size=127, ...}) = 0
>>> fstat(3, {st_mode=S_IFREG|0644, st_size=127, ...}) = 0
>>> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
>>> = 0x7fdeb770b000
>>> read(3,
>>> "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\0\0\1\0\0\0\0"..., 4096)
>>> = 127
>>> lseek(3, -71, SEEK_CUR) = 56
>>> read(3,
>>> "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\0\0\1\0\0\0\0"..., 4096) = 71
>>> close(3) = 0
>>> munmap(0x7fdeb770b000, 4096) = 0
>>> socket(PF_LOCAL, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 3
>>> connect(3, {sa_family=AF_LOCAL, sun_path="/dev/log"}, 110) = 0
>>> sendto(3, "<11>May 23 10:11:18 imapd: could"..., 67, MSG_NOSIGNAL, NULL,
>>> 0) = 67
>>> exit_group(70) = ?
>>> +++ exited with 70 +++
>>>
>>> Michael
>>>
>>>
>>> On 05/19/2017 05:55 PM, Michael Ulitskiy wrote:
>>>
>>> Msg # 57050 Previous in Sequence
>>> <http://asg.andrew.cmu.edu/archive/message.php?mailbox=archive.info-cyrus&ms
>>> g=57374>
>>>
>>> Date Fri, 19 May 2017 11:32:38 -0400
>>> To [email protected]
>>> From Michael Ulitskiy <[email protected]>
>>> Reply-To: Michael Ulitskiy <[email protected]>
>>> Subject Re: Multi-thread cyrus delayed forking of imapd processes after
>>> connecting to master listener
>>>
>>> My immediate guess is it blocks at reading /dev/random.
>>> strace should show you exactly where it blocks.
>>> What version of SASL are you using? Newer versions have switched to
>>> /dev/urandom AFAIK
>>>
>>> Michael
>>>
>>> On Friday, May 19, 2017 05:48:36 PM Michael Hieb wrote:
>>>> Apologies for long post, most of it is configuration details.
>>>>
>>>> I have recently changed from a single threaded cyrus server in which
>>>> multiple domains were overloaded on one listener as multiple virtual
>>>> domains to a multiple threaded cyrus server in which multiple domains
>>>> are listened for on separate ip addresses with separate configurations.
>>>> The primary motivation was to have separate tls certificates for each
>>>> domain. The problem is that I can connect to cyrus listener on all
>>>> ip/ports for all domains, but while one of them will fork immediately
>>>> and respond with a banner, the others will delay for a period of time
>>>> from a few seconds to a minute or so before forking and responding with
>>>> a banner. With the same setup, I change to a single threaded cyrus
>>>> server to listen on all ip/ports then I get an immediate response on
>>>> all, but of course I do not get the separate tls certificate or
>>>> configuration. It is replicable that switching between the single
>>>> threaded and multiple threaded configuration triggers the problem. I
>>>> have searched the logs and the mail-lists and found nothing that seems
>>>> related.
>>>>
>>>> Question: why does switching to multiple threaded cyrus server trigger
>>>> delayed forking of imapd processes after connecting to master listener?
>>>>
>>>> On listener which responds immediately (as expected) I get this:
>>>>
>>>> user@somehost:~> telnet imap.domain1.com 143
>>>> Trying 192.168.110.171...
>>>> Connected to imap.domain1.com.
>>>> Escape character is '^]'.
>>>> * OK [CAPABILITY IMAP4rev1 LITERAL+ ID ENABLE STARTTLS AUTH=GSS-SPNEGO
>>>> AUTH=GSSAPI AUTH=DIGEST-MD5 AUTH=CRAM-MD5 AUTH=LOGIN AUTH=PLAIN SASL-IR]
>>>> imap.domain1.com Cyrus IMAP v2.4.18 server ready
>>>>
>>>> On listener with delay, I get this (and process hangs for many seconds
>>>> or even a minute or two):
>>>>
>>>> user@somehost:~> telnet imap.domain2.com 143
>>>> Trying 192.168.110.171...
>>>> Connected to imap.domain2.com.
>>>> Escape character is '^]'.
>>>>
>>>> The domain for which the listener responds and the one for which it
>>>> delays seems to change and be random as far as I can tell.
>>>>
>>>> There is nothing in the log journal that looks different from when we
>>>> connect and get a for and when we connect and get a delay.
>>>>
>>>> May 19 09:44:31 MAILSERVER master[13762]: about to exec
>>>> /usr/lib/cyrus/bin/imapd
>>>> May 19 09:44:31 MAILSERVER imap[13762]: executed
>>>> May 19 09:44:31 MAILSERVER imap[13762]: IOERROR: opening
>>>> /var/lib/imap/user_deny.db: No such file or directory
>>>>
>>>> and once imapd forks and banner is generated
>>>>
>>>> May 19 09:46:45 MAILSERVER imap[13814]: accepted connection
>>>>
>>>> Here are the configuration details:
>>>>
>>>> I run cyrus 2.4.18-3.6 on openSuSE Leap 42.2 Linux MAILSERVER
>>>> 4.4.62-18.6-default #1 SMP Fri Apr 21 16:14:48 UTC 2017 (84f9824) x86_64
>>>> x86_64 x86_64 GNU/Linux.
>>>>
>>>> Here is my (sanitized) cyrus.conf and one imapd.conf (they all look
>>>> alike except for certificate and domain specifics).
>>>>
>>>> MAILSERVER:~ # cat /etc/cyrus.conf
>>>> START {
>>>> # do not delete this entry!
>>>> recover cmd="ctl_cyrusdb -r"
>>>>
>>>> # this is only necessary if using idled for IMAP IDLE
>>>> idled cmd="idled"
>>>> }
>>>>
>>>> # UNIX sockets start with a slash and are put into /var/lib/imap/socket
>>>> SERVICES {
>>>> # add or remove based on preferences
>>>> #imap cmd="imapd" listen="imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain1.com.conf "
>>>> listen="192.168.171.4:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain1.com.conf "
>>>> listen="192.168.110.171:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain2.com.conf "
>>>> listen="192.168.172.4:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain2.com.conf "
>>>> listen="192.168.110.172:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain3.com.conf "
>>>> listen="192.168.174.4:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain3.com.conf "
>>>> listen="192.168.110.174:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain4.com.conf "
>>>> listen="192.168.175.4:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain4.com.conf "
>>>> listen="192.168.110.175:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain5.com.conf "
>>>> listen="192.168.176.4:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain5.com.conf "
>>>> listen="192.168.110.176:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain6.com.conf "
>>>> listen="192.168.177.4:imap" maxchild=-1 maxforkrate=100
>>>> imap cmd="imapd -C /etc/imapd.domain6.com.conf "
>>>> listen="192.168.110.177:imap" maxchild=-1 maxforkrate=100
>>>>
>>>> #imaps cmd="imapd -s" listen="imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain1.com.conf -s "
>>>> listen="192.168.171.4:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain1.com.conf -s "
>>>> listen="192.168.110.171:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain2.com.conf -s "
>>>> listen="192.168.172.4:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain2.com.conf -s "
>>>> listen="192.168.110.172:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain3.com.conf -s "
>>>> listen="192.168.174.4:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain3.com.conf -s "
>>>> listen="192.168.110.174:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain4.com.conf -s "
>>>> listen="192.168.175.4:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain4.com.conf -s "
>>>> listen="192.168.110.175:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain5.com.conf -s "
>>>> listen="192.168.176.4:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain5.com.conf -s "
>>>> listen="192.168.110.176:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain6.com.conf -s "
>>>> listen="192.168.177.4:imaps" maxchild=-1 maxforkrate=100
>>>> imaps cmd="imapd -C /etc/imapd.domain6.com.conf -s "
>>>> listen="192.168.110.177:imaps" maxchild=-1 maxforkrate=100
>>>>
>>>> #pop3 cmd="pop3d" listen="pop3"
>>>> #pop3s cmd="pop3d -s" listen="pop3s"
>>>> #sieve cmd="timsieved" listen="sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain1.com.conf"
>>>> listen="192.168.171.4:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain1.com.conf"
>>>> listen="192.168.110.171:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain2.com.conf"
>>>> listen="192.168.172.4:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain2.com.conf"
>>>> listen="192.168.110.172:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain3.com.conf"
>>>> listen="192.168.174.4:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain3.com.conf"
>>>> listen="192.168.110.174:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain4.com.conf"
>>>> listen="192.168.175.4:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain4.com.conf"
>>>> listen="192.168.110.175:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain5.com.conf"
>>>> listen="192.168.176.4:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain5.com.conf"
>>>> listen="192.168.110.176:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain6.com.conf"
>>>> listen="192.168.177.4:sieve" maxchild=-1 maxforkrate=100
>>>> sieve cmd="timsieved -C /etc/imapd.domain6.com.conf"
>>>> listen="192.168.110.177:sieve" maxchild=-1 maxforkrate=100
>>>>
>>>> #ptloader cmd="ptloader" listen="/var/lib/imap/ptclient/ptsock"
>>>>
>>>> # at least one LMTP is required for delivery
>>>> lmtp cmd="lmtpd -a" listen="mail.domain1.com:lmtp" maxchild=-1
>>>> maxforkrate=100
>>>> lmtp cmd="lmtpd -a" listen="mail.domain2.com:lmtp" maxchild=-1
>>>> maxforkrate=100
>>>> lmtp cmd="lmtpd -a" listen="mail.domain3.com:lmtp" maxchild=-1
>>>> maxforkrate=100
>>>> lmtp cmd="lmtpd -a" listen="mail.domain4.com:lmtp" maxchild=-1
>>>> maxforkrate=100
>>>> lmtp cmd="lmtpd -a" listen="mail.domain5.com:lmtp" maxchild=-1
>>>> maxforkrate=100
>>>> lmtp cmd="lmtpd -a" listen="mail.domain6.com:lmtp" maxchild=-1
>>>> maxforkrate=100
>>>> #lmtpunix cmd="lmtpd" listen="/var/lib/imap/socket/lmtp"
>>>>
>>>> # this is only necessary if using notifications
>>>> #notify cmd="notifyd" listen="/var/lib/imap/socket/notify" proto="udp"
>>>> }
>>>>
>>>> EVENTS {
>>>> # this is required
>>>> checkpoint cmd="ctl_cyrusdb -c" period=30
>>>>
>>>> # this is only necessary if using duplicate delivery suppression,
>>>> # Sieve or NNTP
>>>> duplicateprune cmd="cyr_expire -E 3" at=0400
>>>>
>>>> # Expire data older then 69 days. Two full months of 31 days
>>>> # each includes two full backup cycles, plus 1 week margin
>>>> # because we run our full backups on the first sat/sun night
>>>> # of each month.
>>>> deleteprune cmd="cyr_expire -E 4 -D 69" at=0430
>>>> expungeprune cmd="cyr_expire -E 4 -X 69" at=0445
>>>>
>>>> # this is only necessary if caching TLS sessions
>>>> tlsprune cmd="tls_prune" at=0400
>>>>
>>>> # Uncomment the next entry, if you want to automatically remove
>>>> # old messages of EVERY user.
>>>> # This example calls ipurge every 60 minutes and ipurge will delete
>>>> # ALL messages older then 120 days.
>>>> # enter 'man 8 ipurge' for more details
>>>> #cleanup cmd="ipurge -d 120 -f" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain1.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain2.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain3.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain4.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain5.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Spam*@domain6.com" period=60
>>>>
>>>> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain1.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain2.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain3.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain4.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain5.com" period=60
>>>> cleanup cmd="ipurge -f -d 30 user/%/Trash*@domain6.com" period=60
>>>>
>>>> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain1.com" period=60
>>>> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain2.com" period=60
>>>> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain3.com" period=60
>>>> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain4.com" period=60
>>>> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain5.com" period=60
>>>> cleanup cmd="ipurge -f -d 60 user/%/Sent*@domain6.com" period=60
>>>>
>>>> # Create search indexes regularly
>>>> squatter cmd="squatter -s -i" at=0530
>>>>
>>>> # running sa-learn
>>>> sa-learn cmd="/usr/local/bin/cyrus-salearn.pl" period=60
>>>> sa-update cmd="/usr/bin/sa-update -v" at=0000
>>>>
>>>> }
>>>>
>>>> MAILSERVER:~ # cat /etc/imapd.domain1.com.conf
>>>> configdirectory: /var/lib/imap
>>>> partition-default: /var/spool/imap
>>>> sievedir: /var/lib/sieve
>>>> annotation_definitions: /etc/imapd.annotations.conf
>>>> # admins: [email protected]
>>>> allowanonymouslogin: no
>>>> autocreatequota: 10000
>>>> reject8bit: no
>>>> quotawarn: 90
>>>> timeout: 30
>>>> poptimeout: 10
>>>> dracinterval: 0
>>>> drachost: localhost
>>>> sasl_pwcheck_method: saslauthd
>>>> lmtp_overquota_perm_failure: no
>>>> #lmtp_catchall_mailbox: admin
>>>> lmtp_downcase_rcpt: yes
>>>> lmtp_fuzzy_mailbox_match: yes
>>>> expunge_mode: delayed
>>>> deletedprefix: DELETED
>>>> delete_mode: delayed
>>>>
>>>> # added by Michael Hieb Jun 22 2014
>>>> allowplaintext: yes
>>>> unixhierarchysep: yes
>>>> allowplainwithouttls: no
>>>> altnamespace: no
>>>> virtdomains: userid
>>>> servername: imap.domain1.net
>>>>
>>>> #
>>>> # if you want TLS, you have to generate certificates and keys
>>>> #
>>>> tls_cert_file: /etc/letsencrypt/live/imap.domain1.net/cert.pem
>>>> tls_key_file: /etc/letsencrypt/live/imap.domain1.net/privkey.pem
>>>> tls_ca_file: /etc/letsencrypt/live/imap.domain1.net/chain.pem
>>>> tls_ca_path: /etc/ssl/certs
>>>> tls_versions: tls1_0 tls1_1 tls1_2
>>>>
>>>> # added by Michael Hieb 20-Jan-2017 for lmtp on port (not socket)
>>>> lmtp_admins: lmtpuser
>>>> MAILSERVER:~ #
>>>>
>>>> Note: before I discovered the problem with forking could be triggered by
>>>> switching between single threaded and multi-threaded cyrus server, I
>>>> thought problem could be related to resource constraints. This is why I
>>>> set all processes with maxchild=-1 maxforkrate=100. I also set the
>>>> following in /etc/systemd/system/cyrus.service
>>>>
>>>> MAILSERVER:~ # cat /etc/systemd/system/cyrus.service
>>>> [deleted...]
>>>> LimitRTPRIO=50000
>>>> LimitNOFILE=50000
>>>> LimitNPROC=50000
>>>> MAILSERVER:~ #
>>>>
>>>> None of these resource settings made any difference and the problem goes
>>>> away as soon as cyrus is single threaded - so I do not believe it is a
>>>> resource constraint (at least one I understand at this point).
>>>>
>>>> Any help would be much appreciated.
>>>>
>>>>
>>>>
>>>> ----
>>>> Cyrus Home Page: http://www.cyrusimap.org/
>>>> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
>>>> To Unsubscribe:
>>>> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
>> ----
>> Cyrus Home Page: http://www.cyrusimap.org/
>> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
>> To Unsubscribe:
>> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
>>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: boutilpj.vcf
> Type: text/x-vcard
> Size: 286 bytes
> Desc: not available
> URL: <http://lists.andrew.cmu.edu/pipermail/info-cyrus/attachments/20170523/c8f3d992/attachment.vcf>
>
----
Cyrus Home Page: http://www.cyrusimap.org/
List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
To Unsubscribe:
https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus