Re: odd problem with cyradm

On 2017-08-21 08:11, Egoitz Aurrekoetxea wrote:
> Good morning,
>
>
> What happens if you launch the cyradm from a remote machine?. For
> instance in a FreeBSD with another Perl version?. Does it work?.
>

No, tried that and results are the same. Current line of thought is that 
something is not right with the quota database, I am building a testing 
setup now to verify.

>
> El 19/8/17 a las 13:18, Per olof Ljungmark escribió:
>> Hi all,
>>
>> Wonder if someone can offer help.
>>
>> Host is FreeBSD 11.0-STABLE #0 r316644M and cyrus 2.5.11 in a jail.
>> If I run cyradm as user cyrus (admin) and issue the lq command, usually
>> there is a proper response at first, but subsequent commands fail. This
>> could very well be a FreeBSD problem but I thought I'll ask here first.
>>
>> 1st:
>>
>> read(0,"lq user/<mailbox>\n",8192)                  = 15 (0xf)
>> write(3,"8 GETQUOTA user/<mailbox>\r\n",24)         = 24 (0x18)
>> select(4,{ 3 },{ },0x0,0x0)                      = 1 (0x1)
>> read(3,"* QUOTA user/<mailbox> (STORAGE 888619 10000000)\r\n8 OK
>> Completed\r\n",4096) = 63 (0x3f)
>> write(1," STORAGE 888619/10000000",24)           = 24 (0x18)
>> write(1," (8.88619%)",11)                        = 11 (0xb)
>> write(1,"\n",1)                                  = 1 (0x1)
>> write(1,"192.168.64.12> ",15)                    = 15 (0xf)
>>
>> and following
>>
>> read(0,"lq user/<mailbox>\n",8192)                  = 15 (0xf)
>> write(3,"10 GETQUOTA user/<mailbox>\r\n",25)        = 25 (0x19)
>> select(4,{ 3 },{ },0x0,0x0)                      = 1 (0x1)
>> read(3,"* QUOTA user/<mailbox> (STORAGE 888619 10000000)\r\n10 OK
>> Completed\r\n",4096) = 64 (0x40)
>> write(1,"192.168.64.12> ",15)                    = 15 (0xf)
>>
>> As one can see, cyradm does not write out the info, just reads it.
>>
>> There are no quota problems AFAICS, bin/quota and -f all works as
>> expected and mail agents sees proper quota info, so I am inclined to
>> think there is something fishy with cyradm or possibly something I
>> cannot see with the quotas.
>>
>> Same with both quotas.db twoskip and quotalegacy. Other cyradm commands
>> works fine.
>>
>> Thanks!
>>
>> //per
>> ----
>> Cyrus Home Page: http://www.cyrusimap.org/
>> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
>> To Unsubscribe:
>> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
>
> --
>
>
> sarenet
> *Egoitz Aurrekoetxea*
> Departamento de sistemas
> 944 209 470
> Parque Tecnológico. Edificio 103
> 48170 Zamudio (Bizkaia)
> [email protected] <mailto:[email protected]>
> www.sarenet.es <https://www.sarenet.es>
>
> Antes de imprimir este correo electrónico piense si es necesario hacerlo.
>
>
> ----
> Cyrus Home Page: http://www.cyrusimap.org/
> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
> To Unsubscribe:
> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
>
----
Cyrus Home Page: http://www.cyrusimap.org/
List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
To Unsubscribe:
https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus