[PATCH 1/5] Remove autoinstalled files by gettextize, declare gettext version.
"Kevin J. McCarthy" <[email protected]>
| Newsgroups | gmane.mail.mutt.devel |
|---|---|
| Message-ID | <[email protected]> |
The gettext manual says, when not checking in the files, you can instead add AM_GNU_GETTEXT_VERSION to configure.ac. Thanks to Matthias Andree for the suggestion and version number. --- ABOUT-NLS | 1 - config.rpath | 684 ----------------------------------- configure.ac | 1 + m4/gettext.m4 | 386 -------------------- m4/host-cpu-c-abi.m4 | 675 ---------------------------------- m4/iconv.m4 | 288 --------------- m4/intlmacosx.m4 | 65 ---- m4/lib-ld.m4 | 168 --------- m4/lib-link.m4 | 800 ----------------------------------------- m4/lib-prefix.m4 | 320 ----------------- m4/nls.m4 | 32 -- m4/po.m4 | 450 ----------------------- m4/progtest.m4 | 91 ----- po/Makefile.in.in | 510 -------------------------- po/Rules-quot | 62 ---- po/boldquot.sed | 10 - po/[email protected] | 25 -- po/[email protected] | 22 -- po/insert-header.sin | 28 -- po/quot.sed | 6 - po/remove-potcdate.sin | 25 -- 21 files changed, 1 insertion(+), 4648 deletions(-) delete mode 100644 ABOUT-NLS delete mode 100755 config.rpath delete mode 100644 m4/gettext.m4 delete mode 100644 m4/host-cpu-c-abi.m4 delete mode 100644 m4/iconv.m4 delete mode 100644 m4/intlmacosx.m4 delete mode 100644 m4/lib-ld.m4 delete mode 100644 m4/lib-link.m4 delete mode 100644 m4/lib-prefix.m4 delete mode 100644 m4/nls.m4 delete mode 100644 m4/po.m4 delete mode 100644 m4/progtest.m4 delete mode 100644 po/Makefile.in.in delete mode 100644 po/Rules-quot delete mode 100644 po/boldquot.sed delete mode 100644 po/[email protected] delete mode 100644 po/[email protected] delete mode 100644 po/insert-header.sin delete mode 100644 po/quot.sed delete mode 100644 po/remove-potcdate.sin diff --git a/ABOUT-NLS b/ABOUT-NLS deleted file mode 100644 index 0a9d56d9..00000000 --- a/ABOUT-NLS +++ /dev/null @@ -1 +0,0 @@ -<https://www.gnu.org/software/gettext/manual/html_node/Users.html> diff --git a/config.rpath b/config.rpath deleted file mode 100755 index 24be79cf..00000000 --- a/config.rpath +++ /dev/null @@ -1,684 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2020 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit <[email protected]>, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -# Code taken from libtool.m4's _LT_CC_BASENAME. - -for cc_temp in $CC""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's _LT_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - ecc*) - wl='-Wl,' - ;; - icc* | ifort*) - wl='-Wl,' - ;; - lf95*) - wl='-Wl,' - ;; - nagfor*) - wl='-Wl,-Wl,,' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - xl* | bgxl* | bgf* | mpixl*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - wl= - ;; - *Sun\ C*) - wl='-Wl,' - ;; - esac - ;; - esac - ;; - newsos6) - ;; - *nto* | *qnx*) - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - rdos*) - ;; - solaris*) - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - wl='-Qoption ld ' - ;; - *) - wl='-Wl,' - ;; - esac - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - wl='-Wl,' - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's _LT_LINKER_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - case "$host_os" in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32* | cegcc*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - haiku*) - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - hardcode_direct=yes - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = no; then - hardcode_libdir_flag_spec= - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then - : - else - ld_shlibs=no - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd2.[01]*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - ;; - *) - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - *nto* | *qnx*) - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - ;; - sysv5* | sco3.2v5* | sco5v6*) - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. -# Unlike libtool.m4, here we don't care about _all_ names of the library, but -# only about the one the linker finds when passed -lNAME. This is the last -# element of library_names_spec in libtool.m4, or possibly two of them if the -# linker has special search rules. -library_names_spec= # the last element of library_names_spec in libtool.m4 -libname_spec='lib$name' -case "$host_os" in - aix3*) - library_names_spec='$libname.a' - ;; - aix[4-9]*) - library_names_spec='$libname$shrext' - ;; - amigaos*) - case "$host_cpu" in - powerpc*) - library_names_spec='$libname$shrext' ;; - m68k) - library_names_spec='$libname.a' ;; - esac - ;; - beos*) - library_names_spec='$libname$shrext' - ;; - bsdi[45]*) - library_names_spec='$libname$shrext' - ;; - cygwin* | mingw* | pw32* | cegcc*) - shrext=.dll - library_names_spec='$libname.dll.a $libname.lib' - ;; - darwin* | rhapsody*) - shrext=.dylib - library_names_spec='$libname$shrext' - ;; - dgux*) - library_names_spec='$libname$shrext' - ;; - freebsd[23].*) - library_names_spec='$libname$shrext$versuffix' - ;; - freebsd* | dragonfly*) - library_names_spec='$libname$shrext' - ;; - gnu*) - library_names_spec='$libname$shrext' - ;; - haiku*) - library_names_spec='$libname$shrext' - ;; - hpux9* | hpux10* | hpux11*) - case $host_cpu in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - library_names_spec='$libname$shrext' - ;; - interix[3-9]*) - library_names_spec='$libname$shrext' - ;; - irix5* | irix6* | nonstopux*) - library_names_spec='$libname$shrext' - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - library_names_spec='$libname$shrext' - ;; - knetbsd*-gnu) - library_names_spec='$libname$shrext' - ;; - netbsd*) - library_names_spec='$libname$shrext' - ;; - newsos6) - library_names_spec='$libname$shrext' - ;; - *nto* | *qnx*) - library_names_spec='$libname$shrext' - ;; - openbsd*) - library_names_spec='$libname$shrext$versuffix' - ;; - os2*) - libname_spec='$name' - shrext=.dll - library_names_spec='$libname.a' - ;; - osf3* | osf4* | osf5*) - library_names_spec='$libname$shrext' - ;; - rdos*) - ;; - solaris*) - library_names_spec='$libname$shrext' - ;; - sunos4*) - library_names_spec='$libname$shrext$versuffix' - ;; - sysv4 | sysv4.3*) - library_names_spec='$libname$shrext' - ;; - sysv4*MP*) - library_names_spec='$libname$shrext' - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - library_names_spec='$libname$shrext' - ;; - tpf*) - library_names_spec='$libname$shrext' - ;; - uts4*) - library_names_spec='$libname$shrext' - ;; -esac - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^\.,,'` -escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF - -# How to pass a linker flag through the compiler. -wl="$escaped_wl" - -# Static library suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally "so"). -shlibext="$shlibext" - -# Format of library name prefix. -libname_spec="$escaped_libname_spec" - -# Library names that the linker finds when passed -lNAME. -library_names_spec="$escaped_library_names_spec" - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="$hardcode_libdir_separator" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct="$hardcode_direct" - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L="$hardcode_minus_L" - -EOF diff --git a/configure.ac b/configure.ac index 36564a7b..1297fd2b 100644 --- a/configure.ac +++ b/configure.ac @@ -1269,6 +1269,7 @@ AC_ARG_ENABLE(iconv, AS_HELP_STRING([--disable-iconv],[Disable iconv support]), ]) AM_GNU_GETTEXT([external]) +AM_GNU_GETTEXT_VERSION(0.21) AM_ICONV if test "$am_func_iconv" != "yes" diff --git a/m4/gettext.m4 b/m4/gettext.m4 deleted file mode 100644 index 4f25a27d..00000000 --- a/m4/gettext.m4 +++ /dev/null @@ -1,386 +0,0 @@ -# gettext.m4 serial 71 (gettext-0.20.2) -dnl Copyright (C) 1995-2014, 2016, 2018-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Lesser General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Lesser General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <[email protected]>, 1995-2000. -dnl Bruno Haible <[email protected]>, 2000-2006, 2008-2010. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL must be one of 'external', 'use-libtool'. -dnl INTLSYMBOL should be 'external' for packages other than GNU gettext, and -dnl 'use-libtool' for the packages 'gettext-runtime' and 'gettext-tools'. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. If NEEDSYMBOL is specified and is -dnl 'need-formatstring-macros', then GNU gettext implementations that don't -dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value '$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])]) - ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], - [errprint([ERROR: Use of AM_GNU_GETTEXT without [external] argument is no longer supported. -])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])])]) - define([gt_included_intl], - ifelse([$1], [external], [no], [yes])) - gt_NEEDS_INIT - AM_GNU_GETTEXT_NEED([$2]) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is not documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation. - gt_INTL_MACOSX - - dnl Set USE_NLS. - AC_REQUIRE([AM_NLS]) - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl Add a version number to the cache macros. - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH([included-gettext], - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], - [AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include <libintl.h> -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings; -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - ]])], - [eval "$gt_func_gnugettext_libc=yes"], - [eval "$gt_func_gnugettext_libc=no"])]) - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - [$gt_func_gnugettext_libintl], - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include <libintl.h> -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - ]])], - [eval "$gt_func_gnugettext_libintl=yes"], - [eval "$gt_func_gnugettext_libintl=no"]) - dnl Now see whether libintl exists and depends on libiconv. - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include <libintl.h> -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - ]])], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LIBICONV $LIBTHREAD" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LTLIBICONV $LTLIBTHREAD" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - CATOBJEXT= - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Some extra flags are needed during linking. - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE([ENABLE_NLS], [1], - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - AC_MSG_CHECKING([whether to use NLS]) - AC_MSG_RESULT([$USE_NLS]) - if test "$USE_NLS" = "yes"; then - AC_MSG_CHECKING([where the gettext function comes from]) - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - AC_MSG_RESULT([$gt_source]) - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE([HAVE_GETTEXT], [1], - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE([HAVE_DCGETTEXT], [1], - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl In GNU gettext we have to set BUILD_INCLUDED_LIBINTL to 'yes' - dnl because some of the testsuite requires it. - BUILD_INCLUDED_LIBINTL=yes - - dnl Make all variables we use known to autoconf. - AC_SUBST([BUILD_INCLUDED_LIBINTL]) - AC_SUBST([USE_INCLUDED_LIBINTL]) - AC_SUBST([CATOBJEXT]) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST([INTLLIBS]) - - dnl Make all documented variables known to autoconf. - AC_SUBST([LIBINTL]) - AC_SUBST([LTLIBINTL]) - AC_SUBST([POSUB]) -]) - - -dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. -m4_define([gt_NEEDS_INIT], -[ - m4_divert_text([DEFAULTS], [gt_needs=]) - m4_define([gt_NEEDS_INIT], []) -]) - - -dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) -AC_DEFUN([AM_GNU_GETTEXT_NEED], -[ - m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) -]) - - -dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) - - -dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], []) diff --git a/m4/host-cpu-c-abi.m4 b/m4/host-cpu-c-abi.m4 deleted file mode 100644 index 6db2aa25..00000000 --- a/m4/host-cpu-c-abi.m4 +++ /dev/null @@ -1,675 +0,0 @@ -# host-cpu-c-abi.m4 serial 13 -dnl Copyright (C) 2002-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible and Sam Steingold. - -dnl Sets the HOST_CPU variable to the canonical name of the CPU. -dnl Sets the HOST_CPU_C_ABI variable to the canonical name of the CPU with its -dnl C language ABI (application binary interface). -dnl Also defines __${HOST_CPU}__ and __${HOST_CPU_C_ABI}__ as C macros in -dnl config.h. -dnl -dnl This canonical name can be used to select a particular assembly language -dnl source file that will interoperate with C code on the given host. -dnl -dnl For example: -dnl * 'i386' and 'sparc' are different canonical names, because code for i386 -dnl will not run on SPARC CPUs and vice versa. They have different -dnl instruction sets. -dnl * 'sparc' and 'sparc64' are different canonical names, because code for -dnl 'sparc' and code for 'sparc64' cannot be linked together: 'sparc' code -dnl contains 32-bit instructions, whereas 'sparc64' code contains 64-bit -dnl instructions. A process on a SPARC CPU can be in 32-bit mode or in 64-bit -dnl mode, but not both. -dnl * 'mips' and 'mipsn32' are different canonical names, because they use -dnl different argument passing and return conventions for C functions, and -dnl although the instruction set of 'mips' is a large subset of the -dnl instruction set of 'mipsn32'. -dnl * 'mipsn32' and 'mips64' are different canonical names, because they use -dnl different sizes for the C types like 'int' and 'void *', and although -dnl the instruction sets of 'mipsn32' and 'mips64' are the same. -dnl * The same canonical name is used for different endiannesses. You can -dnl determine the endianness through preprocessor symbols: -dnl - 'arm': test __ARMEL__. -dnl - 'mips', 'mipsn32', 'mips64': test _MIPSEB vs. _MIPSEL. -dnl - 'powerpc64': test _BIG_ENDIAN vs. _LITTLE_ENDIAN. -dnl * The same name 'i386' is used for CPUs of type i386, i486, i586 -dnl (Pentium), AMD K7, Pentium II, Pentium IV, etc., because -dnl - Instructions that do not exist on all of these CPUs (cmpxchg, -dnl MMX, SSE, SSE2, 3DNow! etc.) are not frequently used. If your -dnl assembly language source files use such instructions, you will -dnl need to make the distinction. -dnl - Speed of execution of the common instruction set is reasonable across -dnl the entire family of CPUs. If you have assembly language source files -dnl that are optimized for particular CPU types (like GNU gmp has), you -dnl will need to make the distinction. -dnl See <https://en.wikipedia.org/wiki/X86_instruction_listings>. -AC_DEFUN([gl_HOST_CPU_C_ABI], -[ - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([gl_C_ASM]) - AC_CACHE_CHECK([host CPU and C ABI], [gl_cv_host_cpu_c_abi], - [case "$host_cpu" in - -changequote(,)dnl - i[34567]86 ) -changequote([,])dnl - gl_cv_host_cpu_c_abi=i386 - ;; - - x86_64 ) - # On x86_64 systems, the C compiler may be generating code in one of - # these ABIs: - # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64. - # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64 - # with native Windows (mingw, MSVC). - # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32. - # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if (defined __x86_64__ || defined __amd64__ \ - || defined _M_X64 || defined _M_AMD64) - int ok; - #else - error fail - #endif - ]])], - [AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __ILP32__ || defined _ILP32 - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=x86_64-x32], - [gl_cv_host_cpu_c_abi=x86_64])], - [gl_cv_host_cpu_c_abi=i386]) - ;; - -changequote(,)dnl - alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] ) -changequote([,])dnl - gl_cv_host_cpu_c_abi=alpha - ;; - - arm* | aarch64 ) - # Assume arm with EABI. - # On arm64 systems, the C compiler may be generating code in one of - # these ABIs: - # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64. - # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32. - # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#ifdef __aarch64__ - int ok; - #else - error fail - #endif - ]])], - [AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __ILP32__ || defined _ILP32 - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=arm64-ilp32], - [gl_cv_host_cpu_c_abi=arm64])], - [# Don't distinguish little-endian and big-endian arm, since they - # don't require different machine code for simple operations and - # since the user can distinguish them through the preprocessor - # defines __ARMEL__ vs. __ARMEB__. - # But distinguish arm which passes floating-point arguments and - # return values in integer registers (r0, r1, ...) - this is - # gcc -mfloat-abi=soft or gcc -mfloat-abi=softfp - from arm which - # passes them in float registers (s0, s1, ...) and double registers - # (d0, d1, ...) - this is gcc -mfloat-abi=hard. GCC 4.6 or newer - # sets the preprocessor defines __ARM_PCS (for the first case) and - # __ARM_PCS_VFP (for the second case), but older GCC does not. - echo 'double ddd; void func (double dd) { ddd = dd; }' > conftest.c - # Look for a reference to the register d0 in the .s file. - AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS $gl_c_asm_opt conftest.c) >/dev/null 2>&1 - if LC_ALL=C grep 'd0,' conftest.$gl_asmext >/dev/null; then - gl_cv_host_cpu_c_abi=armhf - else - gl_cv_host_cpu_c_abi=arm - fi - rm -f conftest* - ]) - ;; - - hppa1.0 | hppa1.1 | hppa2.0* | hppa64 ) - # On hppa, the C compiler may be generating 32-bit code or 64-bit - # code. In the latter case, it defines _LP64 and __LP64__. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#ifdef __LP64__ - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=hppa64], - [gl_cv_host_cpu_c_abi=hppa]) - ;; - - ia64* ) - # On ia64 on HP-UX, the C compiler may be generating 64-bit code or - # 32-bit code. In the latter case, it defines _ILP32. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#ifdef _ILP32 - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=ia64-ilp32], - [gl_cv_host_cpu_c_abi=ia64]) - ;; - - mips* ) - # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this - # at 32. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64) - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=mips64], - [# In the n32 ABI, _ABIN32 is defined, _ABIO32 is not defined (but - # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIN32. - # In the 32 ABI, _ABIO32 is defined, _ABIN32 is not defined (but - # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIO32. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if (_MIPS_SIM == _ABIN32) - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=mipsn32], - [gl_cv_host_cpu_c_abi=mips])]) - ;; - - powerpc* ) - # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD. - # No need to distinguish them here; the caller may distinguish - # them based on the OS. - # On powerpc64 systems, the C compiler may still be generating - # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may - # be generating 64-bit code. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __powerpc64__ || defined _ARCH_PPC64 - int ok; - #else - error fail - #endif - ]])], - [# On powerpc64, there are two ABIs on Linux: The AIX compatible - # one and the ELFv2 one. The latter defines _CALL_ELF=2. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined _CALL_ELF && _CALL_ELF == 2 - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=powerpc64-elfv2], - [gl_cv_host_cpu_c_abi=powerpc64]) - ], - [gl_cv_host_cpu_c_abi=powerpc]) - ;; - - rs6000 ) - gl_cv_host_cpu_c_abi=powerpc - ;; - - riscv32 | riscv64 ) - # There are 2 architectures (with variants): rv32* and rv64*. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if __riscv_xlen == 64 - int ok; - #else - error fail - #endif - ]])], - [cpu=riscv64], - [cpu=riscv32]) - # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d. - # Size of 'long' and 'void *': - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __LP64__ - int ok; - #else - error fail - #endif - ]])], - [main_abi=lp64], - [main_abi=ilp32]) - # Float ABIs: - # __riscv_float_abi_double: - # 'float' and 'double' are passed in floating-point registers. - # __riscv_float_abi_single: - # 'float' are passed in floating-point registers. - # __riscv_float_abi_soft: - # No values are passed in floating-point registers. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __riscv_float_abi_double - int ok; - #else - error fail - #endif - ]])], - [float_abi=d], - [AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __riscv_float_abi_single - int ok; - #else - error fail - #endif - ]])], - [float_abi=f], - [float_abi='']) - ]) - gl_cv_host_cpu_c_abi="${cpu}-${main_abi}${float_abi}" - ;; - - s390* ) - # On s390x, the C compiler may be generating 64-bit (= s390x) code - # or 31-bit (= s390) code. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __LP64__ || defined __s390x__ - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=s390x], - [gl_cv_host_cpu_c_abi=s390]) - ;; - - sparc | sparc64 ) - # UltraSPARCs running Linux have `uname -m` = "sparc64", but the - # C compiler still generates 32-bit code. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __sparcv9 || defined __arch64__ - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi=sparc64], - [gl_cv_host_cpu_c_abi=sparc]) - ;; - - *) - gl_cv_host_cpu_c_abi="$host_cpu" - ;; - esac - ]) - - dnl In most cases, $HOST_CPU and $HOST_CPU_C_ABI are the same. - HOST_CPU=`echo "$gl_cv_host_cpu_c_abi" | sed -e 's/-.*//'` - HOST_CPU_C_ABI="$gl_cv_host_cpu_c_abi" - AC_SUBST([HOST_CPU]) - AC_SUBST([HOST_CPU_C_ABI]) - - # This was - # AC_DEFINE_UNQUOTED([__${HOST_CPU}__]) - # AC_DEFINE_UNQUOTED([__${HOST_CPU_C_ABI}__]) - # earlier, but KAI C++ 3.2d doesn't like this. - sed -e 's/-/_/g' >> confdefs.h <<EOF -#ifndef __${HOST_CPU}__ -#define __${HOST_CPU}__ 1 -#endif -#ifndef __${HOST_CPU_C_ABI}__ -#define __${HOST_CPU_C_ABI}__ 1 -#endif -EOF - AH_TOP([/* CPU and C ABI indicator */ -#ifndef __i386__ -#undef __i386__ -#endif -#ifndef __x86_64_x32__ -#undef __x86_64_x32__ -#endif -#ifndef __x86_64__ -#undef __x86_64__ -#endif -#ifndef __alpha__ -#undef __alpha__ -#endif -#ifndef __arm__ -#undef __arm__ -#endif -#ifndef __armhf__ -#undef __armhf__ -#endif -#ifndef __arm64_ilp32__ -#undef __arm64_ilp32__ -#endif -#ifndef __arm64__ -#undef __arm64__ -#endif -#ifndef __hppa__ -#undef __hppa__ -#endif -#ifndef __hppa64__ -#undef __hppa64__ -#endif -#ifndef __ia64_ilp32__ -#undef __ia64_ilp32__ -#endif -#ifndef __ia64__ -#undef __ia64__ -#endif -#ifndef __m68k__ -#undef __m68k__ -#endif -#ifndef __mips__ -#undef __mips__ -#endif -#ifndef __mipsn32__ -#undef __mipsn32__ -#endif -#ifndef __mips64__ -#undef __mips64__ -#endif -#ifndef __powerpc__ -#undef __powerpc__ -#endif -#ifndef __powerpc64__ -#undef __powerpc64__ -#endif -#ifndef __powerpc64_elfv2__ -#undef __powerpc64_elfv2__ -#endif -#ifndef __riscv32__ -#undef __riscv32__ -#endif -#ifndef __riscv64__ -#undef __riscv64__ -#endif -#ifndef __riscv32_ilp32__ -#undef __riscv32_ilp32__ -#endif -#ifndef __riscv32_ilp32f__ -#undef __riscv32_ilp32f__ -#endif -#ifndef __riscv32_ilp32d__ -#undef __riscv32_ilp32d__ -#endif -#ifndef __riscv64_ilp32__ -#undef __riscv64_ilp32__ -#endif -#ifndef __riscv64_ilp32f__ -#undef __riscv64_ilp32f__ -#endif -#ifndef __riscv64_ilp32d__ -#undef __riscv64_ilp32d__ -#endif -#ifndef __riscv64_lp64__ -#undef __riscv64_lp64__ -#endif -#ifndef __riscv64_lp64f__ -#undef __riscv64_lp64f__ -#endif -#ifndef __riscv64_lp64d__ -#undef __riscv64_lp64d__ -#endif -#ifndef __s390__ -#undef __s390__ -#endif -#ifndef __s390x__ -#undef __s390x__ -#endif -#ifndef __sh__ -#undef __sh__ -#endif -#ifndef __sparc__ -#undef __sparc__ -#endif -#ifndef __sparc64__ -#undef __sparc64__ -#endif -]) - -]) - - -dnl Sets the HOST_CPU_C_ABI_32BIT variable to 'yes' if the C language ABI -dnl (application binary interface) is a 32-bit one, to 'no' if it is a 64-bit -dnl one, or to 'unknown' if unknown. -dnl This is a simplified variant of gl_HOST_CPU_C_ABI. -AC_DEFUN([gl_HOST_CPU_C_ABI_32BIT], -[ - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_CACHE_CHECK([32-bit host C ABI], [gl_cv_host_cpu_c_abi_32bit], - [if test -n "$gl_cv_host_cpu_c_abi"; then - case "$gl_cv_host_cpu_c_abi" in - i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc) - gl_cv_host_cpu_c_abi_32bit=yes ;; - x86_64 | alpha | arm64 | hppa64 | ia64 | mips64 | powerpc64 | powerpc64-elfv2 | riscv*-lp64* | s390x | sparc64 ) - gl_cv_host_cpu_c_abi_32bit=no ;; - *) - gl_cv_host_cpu_c_abi_32bit=unknown ;; - esac - else - case "$host_cpu" in - - # CPUs that only support a 32-bit ABI. - arc \ - | bfin \ - | cris* \ - | csky \ - | epiphany \ - | ft32 \ - | h8300 \ - | m68k \ - | microblaze | microblazeel \ - | nds32 | nds32le | nds32be \ - | nios2 | nios2eb | nios2el \ - | or1k* \ - | or32 \ - | sh | sh[1234] | sh[1234]e[lb] \ - | tic6x \ - | xtensa* ) - gl_cv_host_cpu_c_abi_32bit=yes - ;; - - # CPUs that only support a 64-bit ABI. -changequote(,)dnl - alpha | alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] \ - | mmix ) -changequote([,])dnl - gl_cv_host_cpu_c_abi_32bit=no - ;; - -changequote(,)dnl - i[34567]86 ) -changequote([,])dnl - gl_cv_host_cpu_c_abi_32bit=yes - ;; - - x86_64 ) - # On x86_64 systems, the C compiler may be generating code in one of - # these ABIs: - # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64. - # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64 - # with native Windows (mingw, MSVC). - # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32. - # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if (defined __x86_64__ || defined __amd64__ \ - || defined _M_X64 || defined _M_AMD64) \ - && !(defined __ILP32__ || defined _ILP32) - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - arm* | aarch64 ) - # Assume arm with EABI. - # On arm64 systems, the C compiler may be generating code in one of - # these ABIs: - # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64. - # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32. - # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32) - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - hppa1.0 | hppa1.1 | hppa2.0* | hppa64 ) - # On hppa, the C compiler may be generating 32-bit code or 64-bit - # code. In the latter case, it defines _LP64 and __LP64__. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#ifdef __LP64__ - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - ia64* ) - # On ia64 on HP-UX, the C compiler may be generating 64-bit code or - # 32-bit code. In the latter case, it defines _ILP32. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#ifdef _ILP32 - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=yes], - [gl_cv_host_cpu_c_abi_32bit=no]) - ;; - - mips* ) - # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this - # at 32. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64) - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - powerpc* ) - # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD. - # No need to distinguish them here; the caller may distinguish - # them based on the OS. - # On powerpc64 systems, the C compiler may still be generating - # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may - # be generating 64-bit code. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __powerpc64__ || defined _ARCH_PPC64 - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - rs6000 ) - gl_cv_host_cpu_c_abi_32bit=yes - ;; - - riscv32 | riscv64 ) - # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d. - # Size of 'long' and 'void *': - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __LP64__ - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - s390* ) - # On s390x, the C compiler may be generating 64-bit (= s390x) code - # or 31-bit (= s390) code. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __LP64__ || defined __s390x__ - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - sparc | sparc64 ) - # UltraSPARCs running Linux have `uname -m` = "sparc64", but the - # C compiler still generates 32-bit code. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __sparcv9 || defined __arch64__ - int ok; - #else - error fail - #endif - ]])], - [gl_cv_host_cpu_c_abi_32bit=no], - [gl_cv_host_cpu_c_abi_32bit=yes]) - ;; - - *) - gl_cv_host_cpu_c_abi_32bit=unknown - ;; - esac - fi - ]) - - HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit" -]) diff --git a/m4/iconv.m4 b/m4/iconv.m4 deleted file mode 100644 index e593b727..00000000 --- a/m4/iconv.m4 +++ /dev/null @@ -1,288 +0,0 @@ -# iconv.m4 serial 21 -dnl Copyright (C) 2000-2002, 2007-2014, 2016-2020 Free Software Foundation, -dnl Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include <stdlib.h> -#include <iconv.h> - ]], - [[iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);]])], - [am_cv_func_iconv=yes]) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include <stdlib.h> -#include <iconv.h> - ]], - [[iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);]])], - [am_cv_lib_iconv=yes] - [am_cv_func_iconv=yes]) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ - dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11, - dnl Solaris 10. - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - am_cv_func_iconv_works=no - for ac_iconv_const in '' 'const'; do - AC_RUN_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include <iconv.h> -#include <string.h> - -#ifndef ICONV_CONST -# define ICONV_CONST $ac_iconv_const -#endif - ]], - [[int result = 0; - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 1; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\263"; - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 2; - iconv_close (cd_ascii_to_88591); - } - } - /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304"; - static char buf[2] = { (char)0xDE, (char)0xAD }; - ICONV_CONST char *inptr = input; - size_t inbytesleft = 1; - char *outptr = buf; - size_t outbytesleft = 1; - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) - result |= 4; - iconv_close (cd_88591_to_utf8); - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - result |= 8; - iconv_close (cd_88591_to_utf8); - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - { - /* Try standardized names. */ - iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP"); - /* Try IRIX, OSF/1 names. */ - iconv_t cd2 = iconv_open ("UTF-8", "eucJP"); - /* Try AIX names. */ - iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP"); - /* Try HP-UX names. */ - iconv_t cd4 = iconv_open ("utf8", "eucJP"); - if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1) - && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1)) - result |= 16; - if (cd1 != (iconv_t)(-1)) - iconv_close (cd1); - if (cd2 != (iconv_t)(-1)) - iconv_close (cd2); - if (cd3 != (iconv_t)(-1)) - iconv_close (cd3); - if (cd4 != (iconv_t)(-1)) - iconv_close (cd4); - } - return result; -]])], - [am_cv_func_iconv_works=yes], , - [case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac]) - test "$am_cv_func_iconv_works" = no || break - done - LIBS="$am_save_LIBS" - ]) - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - AC_DEFINE([HAVE_ICONV], [1], - [Define if you have the iconv() function and it works.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) - else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST([LIBICONV]) - AC_SUBST([LTLIBICONV]) -]) - -dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to -dnl avoid warnings like -dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". -dnl This is tricky because of the way 'aclocal' is implemented: -dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. -dnl Otherwise aclocal's initial scan pass would miss the macro definition. -dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. -dnl Otherwise aclocal would emit many "Use of uninitialized value $1" -dnl warnings. -m4_define([gl_iconv_AC_DEFUN], - m4_version_prereq([2.64], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [m4_ifdef([gl_00GNULIB], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [[AC_DEFUN( - [$1], [$2])]])])) -gl_iconv_AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL([am_cv_proto_iconv], [ - AC_COMPILE_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include <stdlib.h> -#include <iconv.h> -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif - ]], - [[]])], - [am_cv_proto_iconv_arg1=""], - [am_cv_proto_iconv_arg1="const"]) - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([ - $am_cv_proto_iconv]) - else - dnl When compiling GNU libiconv on a system that does not have iconv yet, - dnl pick the POSIX compliant declaration without 'const'. - am_cv_proto_iconv_arg1="" - fi - AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], - [Define as const if the declaration of iconv() needs const.]) - dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>. - m4_ifdef([gl_ICONV_H_DEFAULTS], - [AC_REQUIRE([gl_ICONV_H_DEFAULTS]) - if test -n "$am_cv_proto_iconv_arg1"; then - ICONV_CONST="const" - fi - ]) -]) diff --git a/m4/intlmacosx.m4 b/m4/intlmacosx.m4 deleted file mode 100644 index ebd9937c..00000000 --- a/m4/intlmacosx.m4 +++ /dev/null @@ -1,65 +0,0 @@ -# intlmacosx.m4 serial 8 (gettext-0.20.2) -dnl Copyright (C) 2004-2014, 2016, 2019-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Lesser General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Lesser General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Checks for special options needed on Mac OS X. -dnl Defines INTL_MACOSX_LIBS. -AC_DEFUN([gt_INTL_MACOSX], -[ - dnl Check for API introduced in Mac OS X 10.4. - AC_CACHE_CHECK([for CFPreferencesCopyAppValue], - [gt_cv_func_CFPreferencesCopyAppValue], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[#include <CoreFoundation/CFPreferences.h>]], - [[CFPreferencesCopyAppValue(NULL, NULL)]])], - [gt_cv_func_CFPreferencesCopyAppValue=yes], - [gt_cv_func_CFPreferencesCopyAppValue=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], - [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) - fi - dnl Don't check for the API introduced in Mac OS X 10.5, CFLocaleCopyCurrent, - dnl because in macOS 10.13.4 it has the following behaviour: - dnl When two or more languages are specified in the - dnl "System Preferences > Language & Region > Preferred Languages" panel, - dnl it returns en_CC where CC is the territory (even when English is not among - dnl the preferred languages!). What we want instead is what - dnl CFLocaleCopyCurrent returned in earlier macOS releases and what - dnl CFPreferencesCopyAppValue still returns, namely ll_CC where ll is the - dnl first among the preferred languages and CC is the territory. - AC_CACHE_CHECK([for CFLocaleCopyPreferredLanguages], [gt_cv_func_CFLocaleCopyPreferredLanguages], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[#include <CoreFoundation/CFLocale.h>]], - [[CFLocaleCopyPreferredLanguages();]])], - [gt_cv_func_CFLocaleCopyPreferredLanguages=yes], - [gt_cv_func_CFLocaleCopyPreferredLanguages=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then - AC_DEFINE([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [1], - [Define to 1 if you have the Mac OS X function CFLocaleCopyPreferredLanguages in the CoreFoundation framework.]) - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes \ - || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - AC_SUBST([INTL_MACOSX_LIBS]) -]) diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4 deleted file mode 100644 index 98c348fa..00000000 --- a/m4/lib-ld.m4 +++ /dev/null @@ -1,168 +0,0 @@ -# lib-ld.m4 serial 9 -dnl Copyright (C) 1996-2003, 2009-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl Subroutines of libtool.m4, -dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid -dnl collision with libtool.m4. - -dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], -[# I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - acl_cv_prog_gnu_ld=yes - ;; -*) - acl_cv_prog_gnu_ld=no - ;; -esac]) -with_gnu_ld=$acl_cv_prog_gnu_ld -]) - -dnl From libtool-2.4. Sets the variable LD. -AC_DEFUN([AC_LIB_PROG_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld [default=no]])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -if test -n "$LD"; then - AC_MSG_CHECKING([for ld]) -elif test "$GCC" = yes; then - AC_MSG_CHECKING([for ld used by $CC]) -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -if test -n "$LD"; then - # Let the user override the test with a path. - : -else - AC_CACHE_VAL([acl_cv_path_LD], - [ - acl_cv_path_LD= # Final result of this test - ac_prog=ld # Program to search in $PATH - if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - acl_output=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $acl_output in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'` - while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do - acl_output=`echo $acl_output | sed "s%$re_direlt%/%"` - done - # Got the pathname. No search in PATH is needed. - acl_cv_path_LD="$acl_output" - ac_prog= - ;; - "") - # If it fails, then pretend we aren't using GCC. - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac - fi - if test -n "$ac_prog"; then - # Search for $ac_prog in $PATH. - acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$acl_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$acl_save_ifs" - fi - case $host in - *-*-aix*) - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __powerpc64__ || defined _ARCH_PPC64 - int ok; - #else - error fail - #endif - ]])], - [# The compiler produces 64-bit code. Add option '-b64' so that the - # linker groks 64-bit object files. - case "$acl_cv_path_LD " in - *" -b64 "*) ;; - *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;; - esac - ], []) - ;; - sparc64-*-netbsd*) - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[#if defined __sparcv9 || defined __arch64__ - int ok; - #else - error fail - #endif - ]])], - [], - [# The compiler produces 32-bit code. Add option '-m elf32_sparc' - # so that the linker groks 32-bit object files. - case "$acl_cv_path_LD " in - *" -m elf32_sparc "*) ;; - *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;; - esac - ]) - ;; - esac - ]) - LD="$acl_cv_path_LD" -fi -if test -n "$LD"; then - AC_MSG_RESULT([$LD]) -else - AC_MSG_RESULT([no]) - AC_MSG_ERROR([no acceptable ld found in \$PATH]) -fi -AC_LIB_PROG_LD_GNU -]) diff --git a/m4/lib-link.m4 b/m4/lib-link.m4 deleted file mode 100644 index eecf70ec..00000000 --- a/m4/lib-link.m4 +++ /dev/null @@ -1,800 +0,0 @@ -# lib-link.m4 serial 31 -dnl Copyright (C) 2001-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_PREREQ([2.61]) - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - pushdef([Name],[m4_translit([$1],[./+-], [____])]) - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - popdef([NAME]) - popdef([Name]) -]) - -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message]) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. The missing-message -dnl defaults to 'no' and may contain additional hints for the user. -dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} -dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - pushdef([Name],[m4_translit([$1],[./+-], [____])]) - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS, - dnl because these -l options might require -L options that are present in - dnl LIBS. -l options benefit only from the -L options listed before it. - dnl Otherwise, add it to the front of LIBS, because it may be a static - dnl library that depends on another static library that is present in LIBS. - dnl Static libraries benefit only from the static libraries listed after - dnl it. - case " $LIB[]NAME" in - *" -l"*) LIBS="$LIBS $LIB[]NAME" ;; - *) LIBS="$LIB[]NAME $LIBS" ;; - esac - AC_LINK_IFELSE( - [AC_LANG_PROGRAM([[$3]], [[$4]])], - [ac_cv_lib[]Name=yes], - [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])']) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) - else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= - LIB[]NAME[]_PREFIX= - fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - popdef([NAME]) - popdef([Name]) -]) - -dnl Determine the platform dependent parameters needed to use rpath: -dnl acl_libext, -dnl acl_shlibext, -dnl acl_libname_spec, -dnl acl_library_names_spec, -dnl acl_hardcode_libdir_flag_spec, -dnl acl_hardcode_libdir_separator, -dnl acl_hardcode_direct, -dnl acl_hardcode_minus_L. -AC_DEFUN([AC_LIB_RPATH], -[ - dnl Complain if config.rpath is missing. - AC_REQUIRE_AUX_FILE([config.rpath]) - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE([rpath], - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_FROMPACKAGE(name, package) -dnl declares that libname comes from the given package. The configure file -dnl will then not have a --with-libname-prefix option but a -dnl --with-package-prefix option. Several libraries can come from the same -dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar -dnl macro call that searches for libname. -AC_DEFUN([AC_LIB_FROMPACKAGE], -[ - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - define([acl_frompackage_]NAME, [$2]) - popdef([NAME]) - pushdef([PACK],[$2]) - pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - define([acl_libsinpackage_]PACKUP, - m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1]) - popdef([PACKUP]) - popdef([PACK]) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found -dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) - pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" - eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" - ]) - AC_ARG_WITH(PACK[-prefix], -[[ --with-]]PACK[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib - --without-]]PACK[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" - eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - additional_libdir2="$withval/$acl_libdirstem2" - additional_libdir3="$withval/$acl_libdirstem3" - fi - fi -]) - if test "X$additional_libdir2" = "X$additional_libdir"; then - additional_libdir2= - fi - if test "X$additional_libdir3" = "X$additional_libdir"; then - additional_libdir3= - fi - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - LIB[]NAME[]_PREFIX= - dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been - dnl computed. So it has to be reset here. - HAVE_LIB[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - for additional_libdir_variable in additional_libdir additional_libdir2 additional_libdir3; do - if test "X$found_dir" = "X"; then - eval dir=\$$additional_libdir_variable - if test -n "$dir"; then - dnl The same code as in the loop below: - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - fi - done - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem3"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$acl_hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem3 | */$acl_libdirstem3/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem3/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - dependency_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $dependency_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$dependency_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$dependency_libdir" != "X/usr/$acl_libdirstem2" \ - && test "X$dependency_libdir" != "X/usr/$acl_libdirstem3"; then - haveit= - if test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem2" \ - || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem3"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$dependency_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$dependency_libdir"; then - dnl Really add $dependency_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$dependency_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$dependency_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$dependency_libdir"; then - dnl Really add $dependency_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$dependency_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi - popdef([PACKLIBS]) - popdef([PACKUP]) - popdef([PACK]) - popdef([NAME]) -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) - -dnl For those cases where a variable contains several -L and -l options -dnl referring to unknown libraries and directories, this macro determines the -dnl necessary additional linker options for the runtime path. -dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) -dnl sets LDADDVAR to linker options needed together with LIBSVALUE. -dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, -dnl otherwise linking without libtool is assumed. -AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], -[ - AC_REQUIRE([AC_LIB_RPATH]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - $1= - if test "$enable_rpath" != no; then - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode directories into the resulting - dnl binary. - rpathdirs= - next= - for opt in $2; do - if test -n "$next"; then - dir="$next" - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2" \ - && test "X$dir" != "X/usr/$acl_libdirstem3"; then - rpathdirs="$rpathdirs $dir" - fi - next= - else - case $opt in - -L) next=yes ;; - -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2" \ - && test "X$dir" != "X/usr/$acl_libdirstem3"; then - rpathdirs="$rpathdirs $dir" - fi - next= ;; - *) next= ;; - esac - fi - done - if test "X$rpathdirs" != "X"; then - if test -n ""$3""; then - dnl libtool is used for linking. Use -R options. - for dir in $rpathdirs; do - $1="${$1}${$1:+ }-R$dir" - done - else - dnl The linker is used for linking directly. - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user - dnl must pass all path elements in one option. - alldirs= - for dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="$flag" - else - dnl The -rpath options are cumulative. - for dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="${$1}${$1:+ }$flag" - done - fi - fi - fi - fi - fi - AC_SUBST([$1]) -]) diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4 deleted file mode 100644 index c8a0b464..00000000 --- a/m4/lib-prefix.m4 +++ /dev/null @@ -1,320 +0,0 @@ -# lib-prefix.m4 serial 17 -dnl Copyright (C) 2001-2005, 2008-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_ARG_WITH([lib-prefix], -[[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir]], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_PREPARE_MULTILIB creates -dnl - a function acl_is_expected_elfclass, that tests whether standard input -dn; has a 32-bit or 64-bit ELF header, depending on the host CPU ABI, -dnl - 3 variables acl_libdirstem, acl_libdirstem2, acl_libdirstem3, containing -dnl the basename of the libdir to try in turn, either "lib" or "lib64" or -dnl "lib/64" or "lib32" or "lib/sparcv9" or "lib/amd64" or similar. -AC_DEFUN([AC_LIB_PREPARE_MULTILIB], -[ - dnl There is no formal standard regarding lib, lib32, and lib64. - dnl On most glibc systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. However, on - dnl Arch Linux based distributions, it's the opposite: 32-bit libraries go - dnl under $prefix/lib32 and 64-bit libraries go under $prefix/lib. - dnl We determine the compiler's default mode by looking at the compiler's - dnl library search path. If at least one of its elements ends in /lib64 or - dnl points to a directory whose absolute pathname ends in /lib64, we use that - dnl for 64-bit ABIs. Similarly for 32-bit ABIs. Otherwise we use the default, - dnl namely "lib". - dnl On Solaris systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or - dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([gl_HOST_CPU_C_ABI_32BIT]) - - AC_CACHE_CHECK([for ELF binary format], [gl_cv_elf], - [AC_EGREP_CPP([Extensible Linking Format], - [#ifdef __ELF__ - Extensible Linking Format - #endif - ], - [gl_cv_elf=yes], - [gl_cv_elf=no]) - ]) - if test $gl_cv_elf; then - # Extract the ELF class of a file (5th byte) in decimal. - # Cf. https://en.wikipedia.org/wiki/Executable_and_Linkable_Format#File_header - if od -A x < /dev/null >/dev/null 2>/dev/null; then - # Use POSIX od. - func_elfclass () - { - od -A n -t d1 -j 4 -N 1 - } - else - # Use BSD hexdump. - func_elfclass () - { - dd bs=1 count=1 skip=4 2>/dev/null | hexdump -e '1/1 "%3d "' - echo - } - fi -changequote(,)dnl - case $HOST_CPU_C_ABI_32BIT in - yes) - # 32-bit ABI. - acl_is_expected_elfclass () - { - test "`func_elfclass | sed -e 's/[ ]//g'`" = 1 - } - ;; - no) - # 64-bit ABI. - acl_is_expected_elfclass () - { - test "`func_elfclass | sed -e 's/[ ]//g'`" = 2 - } - ;; - *) - # Unknown. - acl_is_expected_elfclass () - { - : - } - ;; - esac -changequote([,])dnl - else - acl_is_expected_elfclass () - { - : - } - fi - - dnl Allow the user to override the result by setting acl_cv_libdirstems. - AC_CACHE_CHECK([for the common suffixes of directories in the library search path], - [acl_cv_libdirstems], - [dnl Try 'lib' first, because that's the default for libdir in GNU, see - dnl <https://www.gnu.org/prep/standards/html_node/Directory-Variables.html>. - acl_libdirstem=lib - acl_libdirstem2= - acl_libdirstem3= - case "$host_os" in - solaris*) - dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment - dnl <https://docs.oracle.com/cd/E19253-01/816-5138/dev-env/index.html>. - dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." - dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the - dnl symlink is missing, so we set acl_libdirstem2 too. - if test $HOST_CPU_C_ABI_32BIT = no; then - acl_libdirstem2=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem3=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem3=lib/amd64 ;; - esac - fi - ;; - *) - dnl If $CC generates code for a 32-bit ABI, the libraries are - dnl surely under $prefix/lib or $prefix/lib32, not $prefix/lib64. - dnl Similarly, if $CC generates code for a 64-bit ABI, the libraries - dnl are surely under $prefix/lib or $prefix/lib64, not $prefix/lib32. - dnl Find the compiler's search path. However, non-system compilers - dnl sometimes have odd library search paths. But we can't simply invoke - dnl '/usr/bin/gcc -print-search-dirs' because that would not take into - dnl account the -m32/-m31 or -m64 options from the $CC or $CFLAGS. - searchpath=`(LC_ALL=C $CC $CPPFLAGS $CFLAGS -print-search-dirs) 2>/dev/null \ - | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test $HOST_CPU_C_ABI_32BIT != no; then - # 32-bit or unknown ABI. - if test -d /usr/lib32; then - acl_libdirstem2=lib32 - fi - fi - if test $HOST_CPU_C_ABI_32BIT != yes; then - # 64-bit or unknown ABI. - if test -d /usr/lib64; then - acl_libdirstem3=lib64 - fi - fi - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib32/ | */lib32 ) acl_libdirstem2=lib32 ;; - */lib64/ | */lib64 ) acl_libdirstem3=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib32 ) acl_libdirstem2=lib32 ;; - */lib64 ) acl_libdirstem3=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - if test $HOST_CPU_C_ABI_32BIT = yes; then - # 32-bit ABI. - acl_libdirstem3= - fi - if test $HOST_CPU_C_ABI_32BIT = no; then - # 64-bit ABI. - acl_libdirstem2= - fi - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" - test -n "$acl_libdirstem3" || acl_libdirstem3="$acl_libdirstem" - acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2,$acl_libdirstem3" - ]) - dnl Decompose acl_cv_libdirstems into acl_libdirstem, acl_libdirstem2, and - dnl acl_libdirstem3. -changequote(,)dnl - acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'` - acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,//' -e 's/,.*//'` - acl_libdirstem3=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,[^,]*,//' -e 's/,.*//'` -changequote([,])dnl -]) diff --git a/m4/nls.m4 b/m4/nls.m4 deleted file mode 100644 index 5a506fc4..00000000 --- a/m4/nls.m4 +++ /dev/null @@ -1,32 +0,0 @@ -# nls.m4 serial 6 (gettext-0.20.2) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016, 2019-2020 Free -dnl Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Lesser General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Lesser General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <[email protected]>, 1995-2000. -dnl Bruno Haible <[email protected]>, 2000-2003. - -AC_PREREQ([2.50]) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE([nls], - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT([$USE_NLS]) - AC_SUBST([USE_NLS]) -]) diff --git a/m4/po.m4 b/m4/po.m4 deleted file mode 100644 index 3778fd7a..00000000 --- a/m4/po.m4 +++ /dev/null @@ -1,450 +0,0 @@ -# po.m4 serial 31 (gettext-0.20.2) -dnl Copyright (C) 1995-2014, 2016, 2018-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Lesser General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Lesser General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <[email protected]>, 1995-2000. -dnl Bruno Haible <[email protected]>, 2000-2003. - -AC_PREREQ([2.60]) - -dnl Checks for all prerequisites of the po subdirectory. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AC_PROG_MKDIR_P])dnl - AC_REQUIRE([AC_PROG_SED])dnl - AC_REQUIRE([AM_NLS])dnl - - dnl Release version of the gettext macros. This is used to ensure that - dnl the gettext macros and po/Makefile.in.in are in sync. - AC_SUBST([GETTEXT_MACRO_VERSION], [0.20]) - - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. - - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) - - dnl Test whether it is GNU msgfmt >= 0.15. -changequote(,)dnl - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([GMSGFMT_015]) - - dnl Search for GNU xgettext 0.12 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Test whether it is GNU xgettext >= 0.15. -changequote(,)dnl - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac -changequote([,])dnl - AC_SUBST([XGETTEXT_015]) - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) - - dnl Test whether it is GNU msgmerge >= 0.20. - if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then - MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt' - else - dnl Test whether it is GNU msgmerge >= 0.12. - if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then - MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet' - else - dnl With these old versions, $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) is - dnl slow. But this is not a big problem, as such old gettext versions are - dnl hardly in use any more. - MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet' - fi - fi - AC_SUBST([MSGMERGE_FOR_MSGFMT_OPTION]) - - dnl Support for AM_XGETTEXT_OPTION. - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) - - AC_CONFIG_COMMANDS([po-directories], [[ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - gt_tab=`printf '\t'` - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done]], - [# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. - OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS" - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) - -dnl Postprocesses a Makefile in a directory containing PO files. -AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], -[ - # When this code is run, in config.status, two variables have already been - # set: - # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, - # - LINGUAS is the value of the environment variable LINGUAS at configure - # time. - -changequote(,)dnl - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - # Find a way to echo strings without interpreting backslash. - if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='echo' - else - if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='printf %s\n' - else - echo_func () { - cat <<EOT -$* -EOT - } - gt_echo='echo_func' - fi - fi - - # A sed script that extracts the value of VARIABLE from a Makefile. - tab=`printf '\t'` - sed_x_variable=' -# Test if the hold space is empty. -x -s/P/P/ -x -ta -# Yes it was empty. Look if we have the expected variable definition. -/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{ - # Seen the first line of the variable definition. - s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=// - ba -} -bd -:a -# Here we are processing a line from the variable definition. -# Remove comment, more precisely replace it with a space. -s/#.*$/ / -# See if the line ends in a backslash. -tb -:b -s/\\$// -# Print the line, without the trailing backslash. -p -tc -# There was no trailing backslash. The end of the variable definition is -# reached. Clear the hold space. -s/^.*$// -x -bd -:c -# A trailing backslash means that the variable definition continues in the -# next line. Put a nonempty string into the hold space to indicate this. -s/^.*$/P/ -x -:d -' -changequote([,])dnl - - # Set POTFILES to the value of the Makefile variable POTFILES. - sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'` - POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"` - # Compute POTFILES_DEPS as - # $(foreach file, $(POTFILES), $(top_srcdir)/$(file)) - POTFILES_DEPS= - for file in $POTFILES; do - POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file" - done - POMAKEFILEDEPS="" - - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS. - sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'` - ALL_LINGUAS=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"` - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - # Compute PROPERTIESFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).properties) - # Compute CLASSFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).class) - # Compute QMFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm) - # Compute MSGFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg) - # Compute RESOURCESDLLFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - PROPERTIESFILES= - CLASSFILES= - QMFILES= - MSGFILES= - RESOURCESDLLFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - PROPERTIESFILES="$PROPERTIESFILES \$(srcdir)/\$(DOMAIN)_$lang.properties" - CLASSFILES="$CLASSFILES \$(srcdir)/\$(DOMAIN)_$lang.class" - QMFILES="$QMFILES $srcdirpre$lang.qm" - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg" - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - JAVACATALOGS= - QTCATALOGS= - TCLCATALOGS= - CSHARPCATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties" - QTCATALOGS="$QTCATALOGS $lang.qm" - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg" - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll" - done - fi - - sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp" - tab=`printf '\t'` - if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - cat >> "$ac_file.tmp" <<EOF -$frobbedlang.msg: $lang.po -${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \ -${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; } -EOF - done - fi - if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - cat >> "$ac_file.tmp" <<EOF -$frobbedlang/\$(DOMAIN).resources.dll: $lang.po -${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \ -${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; } -EOF - done - fi - if test -n "$POMAKEFILEDEPS"; then - cat >> "$ac_file.tmp" <<EOF -Makefile: $POMAKEFILEDEPS -EOF - fi - mv "$ac_file.tmp" "$ac_file" -]) - -dnl Initializes the accumulator used by AM_XGETTEXT_OPTION. -AC_DEFUN([AM_XGETTEXT_OPTION_INIT], -[ - XGETTEXT_EXTRA_OPTIONS= -]) - -dnl Registers an option to be passed to xgettext in the po subdirectory. -AC_DEFUN([AM_XGETTEXT_OPTION], -[ - AC_REQUIRE([AM_XGETTEXT_OPTION_INIT]) - XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1" -]) diff --git a/m4/progtest.m4 b/m4/progtest.m4 deleted file mode 100644 index f28010ae..00000000 --- a/m4/progtest.m4 +++ /dev/null @@ -1,91 +0,0 @@ -# progtest.m4 serial 8 (gettext-0.20.2) -dnl Copyright (C) 1996-2003, 2005, 2008-2020 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Lesser General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Lesser General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <[email protected]>, 1996. - -AC_PREREQ([2.50]) - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[ -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL([ac_cv_path_$1], -[case "[$]$1" in - [[\\/]]* | ?:[[\\/]]*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in ifelse([$5], , $PATH, [$5]); do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$][$1]) -else - AC_MSG_RESULT([no]) -fi -AC_SUBST([$1])dnl -]) diff --git a/po/Makefile.in.in b/po/Makefile.in.in deleted file mode 100644 index 6b25f0d9..00000000 --- a/po/Makefile.in.in +++ /dev/null @@ -1,510 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-2000 Ulrich Drepper <[email protected]> -# Copyright (C) 2000-2020 Free Software Foundation, Inc. -# -# Copying and distribution of this file, with or without modification, -# are permitted in any medium without royalty provided the copyright -# notice and this notice are preserved. This file is offered as-is, -# without any warranty. -# -# Origin: gettext-0.21 -GETTEXT_MACRO_VERSION = 0.20 - -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - -SED = @SED@ -SHELL = /bin/sh -@SET_MAKE@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datarootdir = @datarootdir@ -datadir = @datadir@ -localedir = @localedir@ -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# @install_sh@ does not start with $(SHELL), so we add it. -# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) @install_sh@ -d -install_sh = $(SHELL) @install_sh@ -MKDIR_P = @MKDIR_P@ -mkdir_p = @mkdir_p@ - -# When building gettext-tools, we prefer to use the built programs -# rather than installed programs. However, we can't do that when we -# are cross compiling. -CROSS_COMPILING = @CROSS_COMPILING@ - -GMSGFMT_ = @GMSGFMT@ -GMSGFMT_no = @GMSGFMT@ -GMSGFMT_yes = @GMSGFMT_015@ -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = @XGETTEXT@ -XGETTEXT_no = @XGETTEXT@ -XGETTEXT_yes = @XGETTEXT_015@ -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = @MSGMERGE@ -MSGMERGE_UPDATE = @MSGMERGE@ --update -MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = @POFILES@ -GMOFILES = @GMOFILES@ -UPDATEPOFILES = @UPDATEPOFILES@ -DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - -CATALOGS = @CATALOGS@ - -POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot -POFILESDEPS_yes = $(POFILESDEPS_) -POFILESDEPS_no = -POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT)) - -DISTFILESDEPS_ = update-po -DISTFILESDEPS_yes = $(DISTFILESDEPS_) -DISTFILESDEPS_no = -DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO)) - -# Makevars gets inserted here. (Don't remove this line!) - -all: all-@USE_NLS@ - - -.SUFFIXES: -.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update - -# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs. -# The GNU Coding Standards say in -# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>: -# "GNU distributions usually contain some files which are not source files -# ... . Since these files normally appear in the source directory, they -# should always appear in the source directory, not in the build directory. -# So Makefile rules to update them should put the updated files in the -# source directory." -# Therefore we put these files in the source directory, not the build directory. - -# During .po -> .gmo conversion, take into account the most recent changes to -# the .pot file. This eliminates the need to update the .po files when the -# .pot file has changed, which would be troublesome if the .po files are put -# under version control. -$(GMOFILES): $(srcdir)/$(DOMAIN).pot -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \ - cd $(srcdir) && \ - rm -f $${lang}.gmo && \ - $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \ - $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \ - mv t-$${lang}.gmo $${lang}.gmo && \ - rm -f $${lang}.1po - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all-yes: $(srcdir)/stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -CHECK_MACRO_VERSION = \ - test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target). - -# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS -# have been loosely updated. Its purpose is that when a developer or translator -# checks out the package from a version control system, and the $(DOMAIN).pot -# file is not under version control, "make" will update the $(DOMAIN).pot and -# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This -# timestamp would not be necessary if updating the $(CATALOGS) would always -# touch them; however, the rule for $(POFILES) has been designed to not touch -# files that don't need to be changed. -$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot - @$(CHECK_MACRO_VERSION) - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch $(srcdir)/stamp-po" && \ - echo timestamp > $(srcdir)/stamp-poT && \ - mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -# The determination of whether the package xyz is a GNU one is based on the -# heuristic whether some file in the top level directory mentions "GNU xyz". -# If GNU 'find' is available, we avoid grepping through monster files. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - package_gnu="$(PACKAGE_GNU)"; \ - test -n "$$package_gnu" || { \ - if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ - LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \ - else \ - LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \ - fi; \ - } | grep -v 'libtool:' >/dev/null; then \ - package_gnu=yes; \ - else \ - package_gnu=no; \ - fi; \ - }; \ - if test "$$package_gnu" = "yes"; then \ - package_prefix='GNU '; \ - else \ - package_prefix=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_prefix}@PACKAGE@" \ - --package-version='@VERSION@' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot-header; then \ - sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \ - cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \ - rm -f $(DOMAIN).1po \ - || exit 1; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(POFILESDEPS) - @test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) \ - && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ - 0.1[6-7] | 0.1[6-7].*) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \ - esac; \ - }; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -install-dvi install-ps install-pdf install-html: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f $(srcdir)/stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS) - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: $(srcdir)/stamp-po $(DISTFILES) - @dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - else \ - case $(XGETTEXT) in \ - :) echo "Warning: Creating a tarball without '$(DOMAIN).pot', because a suitable 'xgettext' program was not found in PATH." 1>&2;; \ - *) echo "Warning: Creating a tarball without '$(DOMAIN).pot', because 'xgettext' found no strings to extract. Check the contents of the POTFILES.in file and the XGETTEXT_OPTIONS in the Makevars file." 1>&2;; \ - esac; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - 0.1[6-7] | 0.1[6-7].*) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - esac; \ - }; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -# Recreate Makefile by invoking config.status. Explicitly invoke the shell, -# because execution permission bits may not work on the current file system. -# Use @SHELL@, which is the shell determined by autoconf for the use by its -# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ - cd $(top_builddir) \ - && @SHELL@ ./config.status $(subdir)/[email protected] po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/po/Rules-quot b/po/Rules-quot deleted file mode 100644 index 18c024bf..00000000 --- a/po/Rules-quot +++ /dev/null @@ -1,62 +0,0 @@ -# Special Makefile rules for English message catalogs with quotation marks. -# -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# This file, Rules-quot, and its auxiliary files (listed under -# DISTFILES.common.extra1) are free software; the Free Software Foundation -# gives unlimited permission to use, copy, distribute, and modify them. - -DISTFILES.common.extra1 = quot.sed boldquot.sed [email protected] [email protected] insert-header.sin Rules-quot - -.SUFFIXES: .insert-header .po-update-en - [email protected]: - $(MAKE) [email protected] [email protected]: - $(MAKE) [email protected] - [email protected]: [email protected] [email protected]: [email protected] - -.insert-header.po-update-en: - @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - ll=`echo $$lang | sed -e 's/@.*//'`; \ - LC_ALL=C; export LC_ALL; \ - cd $(srcdir); \ - if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \ - | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \ - { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \ - $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \ - ;; \ - *) \ - $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \ - ;; \ - esac } 2>/dev/null > $$tmpdir/$$lang.new.po \ - ; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "creation of $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - [email protected]: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/[email protected]/g' $(srcdir)/insert-header.sin > [email protected] - [email protected]: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/[email protected]/g' $(srcdir)/insert-header.sin > [email protected] - -mostlyclean: mostlyclean-quot -mostlyclean-quot: - rm -f *.insert-header diff --git a/po/boldquot.sed b/po/boldquot.sed deleted file mode 100644 index 4b937aa5..00000000 --- a/po/boldquot.sed +++ /dev/null @@ -1,10 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g -s/“/“[1m/g -s/”/[0m”/g -s/‘/‘[1m/g -s/’/[0m’/g diff --git a/po/[email protected] b/po/[email protected] deleted file mode 100644 index 506ca9e9..00000000 --- a/po/[email protected] +++ /dev/null @@ -1,25 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# -# This catalog furthermore displays the text between the quotation marks in -# bold face, assuming the VT100/XTerm escape sequences. -# diff --git a/po/[email protected] b/po/[email protected] deleted file mode 100644 index 6522f0ce..00000000 --- a/po/[email protected] +++ /dev/null @@ -1,22 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# diff --git a/po/insert-header.sin b/po/insert-header.sin deleted file mode 100644 index ceeebb93..00000000 --- a/po/insert-header.sin +++ /dev/null @@ -1,28 +0,0 @@ -# Sed script that inserts the file called HEADER before the header entry. -# -# Copyright (C) 2001 Free Software Foundation, Inc. -# Written by Bruno Haible <[email protected]>, 2001. -# This file is free software; the Free Software Foundation gives -# unlimited permission to use, copy, distribute, and modify it. -# -# At each occurrence of a line starting with "msgid ", we execute the following -# commands. At the first occurrence, insert the file. At the following -# occurrences, do nothing. The distinction between the first and the following -# occurrences is achieved by looking at the hold space. -/^msgid /{ -x -# Test if the hold space is empty. -s/m/m/ -ta -# Yes it was empty. First occurrence. Read the file. -r HEADER -# Output the file's contents by reading the next line. But don't lose the -# current line while doing this. -g -N -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} diff --git a/po/quot.sed b/po/quot.sed deleted file mode 100644 index 0122c463..00000000 --- a/po/quot.sed +++ /dev/null @@ -1,6 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin deleted file mode 100644 index 8c70dfbf..00000000 --- a/po/remove-potcdate.sin +++ /dev/null @@ -1,25 +0,0 @@ -# Sed script that removes the POT-Creation-Date line in the header entry -# from a POT file. -# -# Copyright (C) 2002 Free Software Foundation, Inc. -# Copying and distribution of this file, with or without modification, -# are permitted in any medium without royalty provided the copyright -# notice and this notice are preserved. This file is offered as-is, -# without any warranty. -# -# The distinction between the first and the following occurrences of the -# pattern is achieved by looking at the hold space. -/^"POT-Creation-Date: .*"$/{ -x -# Test if the hold space is empty. -s/P/P/ -ta -# Yes it was empty. First occurrence. Remove the line. -g -d -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} -- 2.53.0