RE: GDBM problem during make

Additionally, here's how you can find them, and then see if one of them is
good

$ locate *include*ndbm.h
/usr/include/gdbm/ndbm.h

$ grep dbm_pagfno /usr/include/gdbm/ndbm.h
extern int       dbm_pagfno ();

So this is good. If the grep turns up nothing, then you have problems.

-Tony
----------------------------------------
Anthony J. Biacco
Senior Systems and Network Administrator
303-981-4955 

> -----Original Message-----
> From: Alex Moen [mailto:[email protected]] 
> Sent: Thursday, November 09, 2006 3:58 PM
> To: Subscribers of Qpopper
> Subject: RE: GDBM problem during make
> 
> Anyone????  If more info is needed, I'd be happy to mail more.
> 
> I'd really like to get this going....
> 
> Alex
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Alex Moen [mailto:[email protected]]
> Sent: Thursday, November 02, 2006 11:18 AM
> To: '[email protected]'
> Subject: GDBM problem during make
> 
> 
> Hi all,
> 
> Running into a problem compiling 4.0.9 on a Solaris 10 6-06 
> box, patched to
> the latest 10_Recommended patchlevel.  Also have lots of GNU software
> already installed, for instance: autoconf 2.59, automake 1.9, 
> bison 1.875,
> flex 2.5, gcc 3.3.2, make 3.80, tcl 8.5, gdbm 1.83 (all from 
> sunfreeware).
> 
> I compile using the following command:
> 
> ./configure  --enable-bulldb=/var/spool/bulls --enable-auto-delete
> --enable-server-mode --enable-standalone 
> --enable-log-facility=LOG_LOCAL5
> --enable-specialauth --with-pam --enable-shy
> --enable-home-dir-mail=mail/.mail
> 
> Compile completes with no warnings at all.  However, here's 
> the end of the
> make output:
> 
> ---clip---
> gcc   pop_dele.o pop_dropcopy.o pop_get_command.o pop_get_subcommand.o
> pop_init.o pop_last.o pop_list.o pop_log.o pop_lower.o 
> pop_msg.o pop_parse.o
> pop_pass.o pop_quit.o pop_rset.o pop_send.o pop_stat.o 
> pop_updt.o pop_user.o
> pop_xtnd.o pop_xmit.o popper.o pop_bull.o xtnd_xlst.o 
> pop_uidl.o mktemp.o
> pop_rpop.o pop_apop.o md5.o pop_auth.o pop_pope.o pop_extend.o scram.o
> hmac.o base64.o pop_util.o get_sub_opt.o msg_ptr.o drac.o pop_config.o
> pop_tls.o pop_tls_openssl.o pop_tls_sslplus.o sslplus_utils.o main.o
> pop_cache.o genpath.o  -o popper ../mmangle/libmangle.a \
>         -I../common ../common/libcommon.a \
>         -lnsl -lsocket -lresolv -lmail  -lgdbm -lnsl  
> -lposix4 -lcrypt -ldl
> -lpam  
> Undefined                       first referenced
>  symbol                             in file
> dbm_dirfno                          pop_bull.o
> ld: fatal: Symbol referencing errors. No output written to popper
> collect2: ld returned 1 exit status
> make[1]: *** [popper] Error 1
> make[1]: Leaving directory `/usr/local/source/qpopper4.0.9/popper'
> make: *** [popper_server] Error 2
> 
> What I have tried so far to no avail: 
> -Reinstalling GDBM
> -Adding the following to Makefile:
> 	DBM_LIBS        =       -L/usr/local/lib -lgdbm
> 	LIBS            =       ${NETWORK_LIBS} 
> ${KERBEROS_LIBS} ${DBM_LIBS}
> 
> -Grepping the net for more help
> 
> Not sure what I'm missing here.  I have already been able to 
> compile popper
> without bulletin support, but I really need the bulletins.
> 
> I've seen this discussed all over the place, but can't find 
> any resolutions
> to any problems.
> 
> Anyone have any ideas???
> 
> Thanks!
> 
> Alex
> 
> 
>