(Postfix, spamd) Bad arg length for Socket::unpack_sockaddr_in,, length is 28, should be 16 at /usr/lib/perl5/core_perl/Socket.pm line 857

#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (no)    (never) (100)
# ==========================================================================
smtp      inet  n       -       n       -       -       smtpd
  -o content_filter=spamassassin
#smtp      inet  n       -       n       -       1       postscreen
#smtpd     pass  -       -       n       -       -       smtpd
#dnsblog   unix  -       -       n       -       0       dnsblog
#tlsproxy  unix  -       -       n       -       0       tlsproxy
# Choose one: enable submission for loopback clients only, or for any client.
#127.0.0.1:submission inet n -   n       -       -       smtpd
submission inet n       -       n       -       -       smtpd
  -o syslog_name=postfix/submission
  -o smtpd_tls_security_level=encrypt
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
  -o smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,reject
  -o smtp_sasl_type=dovecot
  -o smtpd_sasl_path=private/auth
smtps     inet  n       -       n       -       -       smtpd
  -o syslog_name=postfix/smtps
  -o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
  -o smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,reject
  -o smtpd_sasl_type=dovecot
  -o smtpd_sasl_path=private/auth
#628       inet  n       -       n       -       -       qmqpd
pickup    unix  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      unix  n       -       n       300     1       qmgr
#qmgr     unix  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       n       1000?   1       tlsmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
trace     unix  -       -       n       -       0       bounce
verify    unix  -       -       n       -       1       verify
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       n       -       -       smtp
relay     unix  -       -       n       -       -       smtp
        -o syslog_name=postfix/$service_name
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
retry     unix  -       -       n       -       -       error
discard   unix  -       -       n       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
anvil     unix  -       -       n       -       1       anvil
scache    unix  -       -       n       -       1       scache
postlog   unix-dgram n  -       n       -       1       postlogd
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
#maildrop  unix  -       n       n       -       -       pipe
#  flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
#  mailbox_transport = lmtp:inet:localhost
#  virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
#
# Old example of delivery via Cyrus.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
#uucp      unix  -       n       n       -       -       pipe
#  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# ====================================================================
#
# Other external delivery methods.
#
#ifmail    unix  -       n       n       -       -       pipe
#  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#
#bsmtp     unix  -       n       n       -       -       pipe
#  flags=Fq. user=bsmtp argv=/usr/sbin/bsmtp -f $sender $nexthop $recipient
#
#scalemail-backend unix -       n       n       -       2       pipe
#  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
#  ${nexthop} ${user} ${extension}
#
#mailman   unix  -       n       n       -       -       pipe
#  flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
#  ${nexthop} ${user}

# SPAMASSASSIN CONFIG:
spamassassin unix -     n       n       -       -       pipe
  user=spamd argv=/usr/bin/spamc -f -e
  /usr/sbin/sendmail -oi -f ${sender} ${recipient}

# This is the right place to customize your installation of SpamAssassin.
#
# See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
# tweaked.
#
# Only a small subset of options are listed below
#
###########################################################################

#    A 'contact address' users should contact for more info. (replaces
#    _CONTACTADDRESS_ in the report template)
# report_contact [email protected]


#   Add *****SPAM***** to the Subject header of spam e-mails
#
rewrite_header Subject [SPAM]


#   Save spam messages as a message/rfc822 MIME attachment instead of
#   modifying the original message (0: off, 2: use text/plain instead)
#
report_safe 0


#   Set which networks or hosts are considered 'trusted' by your mail
#   server (i.e. not spammers)
#
# trusted_networks 212.17.35.


#   Set file-locking method (flock is not safe over NFS, but is faster)
#
# lock_method flock


#   Set the threshold at which a message is considered spam (default: 5.0)
#
required_score 5.0


#   Use Bayesian classifier (default: 1)
#
use_bayes 1


#   Bayesian classifier auto-learning (default: 1)
#
bayes_auto_learn 1


#   Set headers which may provide inappropriate cues to the Bayesian
#   classifier
#
# bayes_ignore_header X-Bogosity
# bayes_ignore_header X-Spam-Flag
# bayes_ignore_header X-Spam-Status


#   Whether to decode non- UTF-8 and non-ASCII textual parts and recode
#   them to UTF-8 before the text is given over to rules processing.
#
# normalize_charset 1

#   Textual body scan limit    (default: 50000)
#
#   Amount of data per email text/* mimepart, that will be run through body
#   rules.  This enables safer and faster scanning of large messages,
#   perhaps having very large textual attachments.  There should be no need
#   to change this well tested default.
#
# body_part_scan_size 50000

#   Textual rawbody data scan limit    (default: 500000)
#
#   Amount of data per email text/* mimepart, that will be run through
#   rawbody rules.
#
# rawbody_part_scan_size 500000

#   Some shortcircuiting, if the plugin is enabled
# 
ifplugin Mail::SpamAssassin::Plugin::Shortcircuit
#
#   default: strongly-whitelisted mails are *really* whitelisted now, if the
#   shortcircuiting plugin is active, causing early exit to save CPU load.
#   Uncomment to turn this on
#
#   SpamAssassin tries hard not to launch DNS queries before priority -100. 
#   If you want to shortcircuit without launching unneeded queries, make
#   sure such rule priority is below -100. These examples are already:
#
# shortcircuit USER_IN_WHITELIST       on
# shortcircuit USER_IN_DEF_WHITELIST   on
# shortcircuit USER_IN_ALL_SPAM_TO     on
# shortcircuit SUBJECT_IN_WHITELIST    on

#   the opposite; blacklisted mails can also save CPU
#
# shortcircuit USER_IN_BLACKLIST       on
# shortcircuit USER_IN_BLACKLIST_TO    on
# shortcircuit SUBJECT_IN_BLACKLIST    on

#   if you have taken the time to correctly specify your "trusted_networks",
#   this is another good way to save CPU
#
# shortcircuit ALL_TRUSTED             on

#   and a well-trained bayes DB can save running rules, too
#
# shortcircuit BAYES_99                spam
# shortcircuit BAYES_00                ham

endif # Mail::SpamAssassin::Plugin::Shortcircuit

-----BEGIN PGP PUBLIC KEY BLOCK-----

xjMEZyVzwBYJKwYBBAHaRw8BAQdAzm30We2ByUPsD1LBP0QIcI7h6LkySRdocl5o
C8HGfVDNHHJldnN1aW5lIDxwaWQxQHJldnN1aW5lLnh5ej7CmQQTFgoAQRYhBI+0
GM2VICLlu8QyYT8le2j1vJM5BQJnJXPAAhsDBQkB4TOABQsJCAcCAiICBhUKCQgL
AgQWAgMBAh4HAheAAAoJED8le2j1vJM5CfkA/2v/NSi/tOzMFEftZL8Xvs9KXwsV
jQ3ApJ4C0SUDQl6xAQD2N3ezdBYr6+jBb6RmUGmcqqj5j6sQqf9WpUX/jzpFBs44
BGclc8ASCisGAQQBl1UBBQEBB0ByaiyAOb6pg4pauv/s6SBAT4Iq/YdihzhLamMZ
bsM9PQMBCAfCfgQYFgoAJhYhBI+0GM2VICLlu8QyYT8le2j1vJM5BQJnJXPAAhsM
BQkB4TOAAAoJED8le2j1vJM5gIEA/AizOK8DAgneMDeOeap/G8yDY0zvJuVUGecc
3vOHklq6AP4+tXepawJEVyEnxYCsfZwPNSBv6kxi3raCILk3D6NPBQ==
=Dvjf
-----END PGP PUBLIC KEY BLOCK-----

-----BEGIN PGP SIGNATURE-----

wnsEABYIACMWIQSPtBjNlSAi5bvEMmE/JXto9byTOQUCZyhGDAUDAAAAAAAKCRA/JXto9byTOWCg
AQC4BUYFyz3Em8FkXGmNHVkuCEzxR5BawlSliFZuF54AjAEArgYdoJo8gCyRJFFEd6nSdXVYn8s8
LsLffN25z1Z6Yw8=
=shMh
-----END PGP SIGNATURE-----