Re: can't read hd in enclosure

"C. S." <[email protected]> wrote in message 
news:[email protected]...
> Sometime around Tue, 7 Mar 2006 23:24:00 -0000, "Porpoise" 
> <[email protected]>
> deemed it necessary to offer:
>
>> Or maybe it's something to do with the interface?!?
>
> Exactly what I was leaning towards.
>
> Try a known-working USB cable.

**
Unfortunately, the cable is the small  (camera) type cable  that came with 
he units.
***
> Check the jumpers on the drive; try all valid options. Occasionally a 
> drive will work with
> certain hardware -only- with "Cable Select" enabled.
> Are the USB port(s) of the system(s) enabled in BIOS? Double-check this.
> Is the IDE cable properly connected to the drive? These are sometimes 
> marked for
> the opposite of what you'd expect. If possible, flip the cable over at the 
> drive.

**
Non symmetrical cable connection - so can't flip.

All USB ports are enabled, did try other ports.

-- 
A SpamCop user and forum reader,
Not Admin
***