Re: Corrupted "return address"

Curious. I had forgotten this step myself and was having the exact same 
problem. Running make install-configure fixed it. Afterwards, I got a dozen 
or so more corrupted messages, which were stuck in the queue from before. 
Now it's all good. 

If that's not it, then I can't help.
Good luck.
Jean 


[email protected] writes: 

> yes I did - I just forgot to say so below. 
> 
>> Did you run make install-configure AFTER doing; ./configure - make - make
>> install-strip ? 
>>
>> Jean 
>>
>>
>> [email protected] writes: 
>>
>>>  A few days ago I asked if anyone else was getting corruption in email
>>> address's when using sqwebmail 4.02. Brian Candler was good enough to
>>> try
>>> and help out, since then I seem to have got "out of the loop" and have
>>> not managed to cure the problem. 
>>>
>>> So this is what happens, when I compose a message in sqwebmail and send
>>> it
>>> the return name (of from address name) part of the address gets
>>> corrupted,
>>> the domain part of the name is ok. example: 
>>>
>>> @40000000406ad46537409994 new msg 52224
>>>>>> >@40000000406ad4653740b104 info msg 52224: bytes 378 from
>>>
>>> Corrupted name --> >>> ><H__@H__@[email protected]> qp 8261 uid 89 
>>>
>>>>>> >@40000000406ad466010aa7ac starting delivery 52: msg 52224 to remote
>>>>>> >[email protected]
>>>>>> >@40000000406ad466010abf1c status: local 0/10 remote 1/20
>>>>>> >@40000000406ad466084f5b84 delivery 52: success:
>>>>>> >192.168.1.1_accepted_message./Re
>>>>>> >mote_host_said:_250_Roger/
>>>>>> >@40000000406ad466084f76dc status: local 0/10 remote 0/20
>>>>>> >@40000000406ad466084f7eac end msg 52224
>>>>>> >
>>>
>>> This happens only from sqwebmail. We have other clients using
>>> courier-imap
>>> 3.02 and squirrelmail 1.5.0 and they are fine. sqwebmail v 3.3.7. is ok
>>> too. 
>>>
>>> I have tried diverting the output from sendit.sh and that too shows the
>>> corruption, indicating definatly a sqwebmail issue. 
>>>
>>> Bellow are all the relevant software versions (i think!), any one any
>>> ideas. 
>>>
>>> Some people seems to be mentioning various options to do with CAHRSET's
>>> etc - I have tried these - no difference. Brian did ask if the display
>>> name was ok, it was. 
>>>
>>> my seetings: 
>>>
>>>   configure options./configure --disable-autorenamesent\
>>>   --without-authdaemon \
>>>   --with-authvchkpw \
>>>   --enable-unicode=iso-8859-1,utf-8 
>>>
>>> authmodulelist is
>>> [root@webmail sqwebmail]# more authmodulelist
>>> authcustom authcram authuserdb authvchkpw authldap authpam 
>>>
>>> vpopmail-5.4.0 - the libvpopmail was compiled from this version of
>>> vpopmal 
>>>
>>> not using any authentication other than authvchkpw 
>>>
>>>
>>> Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs
>>> gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98) 
>>>
>>> Linux version 2.4.7-10 ([email protected]) (gcc
>>> version
>>> 2.96
>>> 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 17:27:27 EDT 2001 
>>>
>>>
>> 
>>
>>
>